Calcium Formate
- Part number
- RXSOL-67-0370-025
- Category
- Construction Chem
- Brand
- RXSOL
Overview
Technical specifications
Calcium Formate, (HCO2)2 Ca
CAS Registry No.544-17-2
EINECS Registry No. 2088637
Calcium Formate is an odourless, free-flowing white crystalline solid. It is a convenient source of calcium and formate ions for aqueous solutions.
| Specifications | |
| Calcium Formate, wt % | 98.0 min |
| Moisture, wt % | 0.5 max |
| Water Insolubles, wt % | 0.05 max |
| Typical Properties | |
| Molecular Weight | 130.12 |
| Melting Point | Decomposes |
| pH of 10% Water Solution | 7.5 |
| Bulk Density lbs / ft3 | 72.6 |
| Solubility | |
| Grams / 100g Water | |
| @ 0°C | 16.2 |
| @ 100°C | 18.4 |
| Grams / 100g of Methanol | |
| @ 15°C | 0.27 |
| @ 66°C | 0.23 |
Applications
| Buffered Solutions | |||||||||
| Calcium Formate 0.1N, ml | 10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 | 90 |
| Formic Acid 0.1N, ml | 90 | 80 | 70 | 60 | 50 | 40 | 30 | 20 | 10 |
| pH | 2.81 | 3.10 | 3.32 | 3.50 | 3.67 | 3.80 | 4.0 | 4.23 | 4.58 |
Dosage and directions
Two or more chemicals are often used in combination to increase the concentration and improve the performance of liquid admixtures, which are preferred to powders for accurate dosing of concrete. Calcium formate sodium nitrite blends have been used extensively, with the added advantage of anti-corrosion properties claimed for their use
Characteristics and notes
Other Valuable Product :::
CALCIUM CARBONATE PPT
GRAPHITE FLAKES
PRECIPITATED SILICA
ALUMINIUM OXIDE
CALCIUM CARBONATE
GREY BARYTES
QUARTZ POWDER
ALUMINIUM HYDROXIDE
CALCIUM SILICATE
GYPSUM
ROCKPHOSPHATE POWDER
ALUMINIUM SILICATE
CALCITE POWDER
HYDRATED LIME
RED OXIDE
BARYTES
CALCINED PETROLEUM COKE
HYDRATED LIME ACTIVATED
RUBBER POWDER
BARIUM SULPHATE
CHINA CLAY POWDER
IRON OXIDE
SOAP STONE
BALL CLAY
CRUM RUBBER
KAOLINE
SLATE POWDER
BAUXITE CALCINED
CARBON BLACK
KYANITE
SILICA FLOUR
BAUXITE POWDER
CERAMIC WOOL
LIGNITE
SILICA GRANULES
BAUXITE LUMPS
DOLOMITE POWDER
LIGHT CLAY POWDER
SULPHUR
BENTONITE POWDER
DIATOMACEOUS EARTH
MAGNESITE
SYNTHETIC RED OXIDE
BLACK OXIDE
EXPANDED VERMICULITE
MICA POWDER
SYNTHETIC YELLOW OXIDE
BLANC FIXE
FELDSPAR
MINERAL WOOL
TALC
BRASS POWDER
FIRE CLAY
MARBLE POWDER
TITANIUM DIOXIDE
BRASS CHIPS
FULLER'S EARTH
NODULATED ROCKWOOL
WHITING
BROWN FACTICE
GLASS WOOL
PARAFIN WAX
WOLOSTONITE
BURNT SINNA
GRAPHITE POWDER
PLASTER OF PARIS
YELLOW OXIDE
ZINC OXIDE
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | Calcium Formate |
| Part Number | RXSOL-67-0370-025 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA
| Phone | +91 22 20871200 - 1400 |
| Fax | +91 22 27612100 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com | |
| Website | www.rxmraine.com |
Substances
| Synonyms | Formic Acid Calcium salt |
| Formula | C2H2CaO4 |
| Molecular weight | 130,11 g/mol |
| CAS-No. | 544-17-2 |
| EC-No. | 208-863-7 |
| Component | Classification | Concentration |
| calcium diformate | ||
|
CAS-No. 544-17-2
EC-No. 208-863-7
|
Eye Dam. 1; H318 | <= 100 % |
For the full text of the H-Statements mentioned in this Section, see Section 16.
Classification of the substance or mixture
| Classification according to Regulation (EC) No 1272/2008 |
Serious eye damage (Category 1), H318
For the full text of the H-Statements mentioned in this Section, see Section 16.
|
Label elements
| Signal Word | Danger |
| Hazard Statements | H318 Causes serious eye damage. |
| Precautionary Statements |
P280 Wear eye protection/ face protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue rinsing.
|
| Supplemental Hazard Statements | None |
| Other hazards | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
| General Advice | Show this material safety data sheet to the doctor in attendance. |
| If inhaled | After inhalation: fresh air. |
| In case of skin contact | In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower. |
| In case of eye contact | After eye contact: rinse out with plenty of water. Call in ophthalmologist. Remove contact lenses. |
| If swallowed | After swallowing: immediately make victim drink water (two glasses at most). Consult a physician. |
| Most important symptoms and effects, both acute and delayed | The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 |
| Indication of any immediate medical attention and special treatment needed | No data available |
| Suitable extinguishing media | Water Foam Carbon dioxide (CO2) Dry powder |
| Unsuitable extinguishing media | For this substance/mixture no limitations of extinguishing agents are given. |
| Special hazards arising from the substance or mixture |
Carbon oxides
Calcium oxide
Combustible.
Development of hazardous combustion gases or vapours possible in the event of fire.
|
| Advice for firefighters | In the event of fire, wear self-contained breathing apparatus. |
| Further information | Prevent fire extinguishing water from contaminating surface water or the ground water system. |
| Personal precautions, protective equipment and emergency procedures |
Advice for non-emergency personnel: Avoid inhalation of dusts. Avoid substance contact.
Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.
For personal protection see section 8.
|
| Environmental precautions | Do not let product enter drains. |
| Methods and material for containment and cleaning up | Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up dry. Dispose of properly. Clean up affected area. Avoid generation of dusts. |
| Reference to other sections | For disposal see section 13. |
| Precautions for safe handling | For precautions see section 2.2. |
| Conditions for safe storage, including any incompatibilities | |
| Storage conditions | Tightly closed. Dry. |
| Storage class | Storage class (TRGS 510): 13: Non Combustible Solids |
| Specific end use(s) | Apart from the uses mentioned in section 1.2 no other specific uses are stipulated |
| Eye/face protection | Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses |
| Skin protection |
This recommendation applies only to the product stated in the safety data sheet,
supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN 16523-1 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell,
Internet: www.kcl.de).
Full contact
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min
Material tested:KCL 741 Dermatril® L
This recommendation applies only to the product stated in the safety data sheet,
supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN 16523-1 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell,
Internet: www.kcl.de).
Splash contact
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min
Material tested: KCL 741 Dermatril® L
|
| Body Protection | Protective clothing |
| Respiratory protection |
Required when dusts are generated.
Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system.
Recommended Filter type: Filter type P3
The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer.
These measures have to be properly documented.
|
| Control of environmental exposure | Do not let product enter drains. |
| Physical state | Powder |
| Color | White |
| Odor | No data available |
| Melting point/freezing point | > 300 °C - OECD Test Guideline 102 |
| Initial boiling point and boiling range | No data available |
| Flammability (solid, gas) | No data available |
| Upper/lower flammability or explosive limits | No data available |
| Flash point | No data available |
| Autoignition temperature |
292 °C
at 1.013 hPa
|
| Decomposition temperature | No data available |
| pH | No data available |
| Viscosity |
Viscosity, kinematic: No data available
Viscosity, dynamic: No data available
|
| Water solubility | 172 g/l at 20 °C - OECD Test Guideline 105 |
| Partition coefficient: n-octanol/water | log Pow: < -2,6 at 20 °C |
| Vapor pressure | No data available |
| Density | No data available |
| Relative density | 2 at 20 °C - ISO 1183 |
| Relative vapor density | No data available |
| Particle characteristics | No data available |
| Explosive properties | No data available |
| Oxidizing properties | No data available |
| Other safety information | |
| Surface tension | 72 mN/m at 20 °C |
| Dissociation constant | 3,79 at 20 °C |
| Reactivity | The following applies in general to flammable organic substances and mixtures: in correspondingly fine distribution, when whirled up a dust explosion potential may generally be assumed. |
| Chemical stability | The product is chemically stable under standard ambient conditions (room temperature) |
| Possibility of hazardous reactions | No data available |
| Conditions to avoid | No information available |
| Incompatible materials | Strong oxidizing agents |
| Hazardous decomposition products | In the event of fire: see section 5 |
| Acute toxicity |
LD50 Oral - Rat - 2.650 mg/kg
Inhalation: No data available
Dermal: No data available
|
| Skin corrosion/irritation |
Skin - Rabbit
Result: No skin irritation
(OECD Test Guideline 404)
|
| Serious eye damage/eye irritation |
Eyes - Rabbit
Result: Risk of serious damage to eyes.
(OECD Test Guideline 405)
|
| Respiratory or skin sensitization | No data available |
| Germ cell mutagenicity | No data available |
| Carcinogenicity | No data available |
| Reproductive toxicity | No data available |
| Specific target organ toxicity - single exposure | No data available |
| Specific target organ toxicity - repeated exposure | No data available |
| Aspiration hazard | No data available |
| Additional Information | |
| Endocrine disrupting properties Product | |
| Assessment |
The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU)
2018/605 at levels of 0.1% or higher.
RTECS: EV9810000
To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated.
|
| Toxicity | No data available |
| Persistence and degradability | No data available |
| Bioaccumulative potential | No data available |
| Mobility in soil | No data available |
| Results of PBT and vPvB assessment | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
| Endocrine disrupting properties Product | |
| Assessment | The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. |
| Other adverse effects | Discharge into the environment must be avoided. |
| Waste Treatment Methods | No data available |
| UN number | ADR/RID: IMDG: IATA: |
| UN proper shipping name |
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
|
| Transport hazard class(es) | ADR/RID: IMDG: IATA: |
| Packaging group | ADR/RID: IMDG: IATA: |
| Environmental hazards | ADR/RID: no IMDG Marine pollutant: no IATA: no |
| Special precautions for user | No data available |
| Further information | Not classified as dangerous in the meaning of transport regulations. |
| Safety, health and environmental regulations/legislation specific for the substance or mixture | This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006. |
| Other regulations | Take note of Dir 94/33/EC on the protection of young people at work. |
| Chemical Safety Assessment | A Chemical Safety Assessment has been carried out for this substance. |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and weassume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |
Availability
Superior Quality Calcium Silicate Powder exporter and supplier in Mumbai, Barka, Kandla, Chennai, Kolkata, Visakhapatnam, Fujairah, Surat, Dubai, Sharjah, Abudhabi, Muscat, BARKA , Muscat, Sohar, Salalah, Ruwi. Calcium Formate Made in India and supplied to in india are Mumbai, Navi Mumbai, New Delhi, Chennai, Bangalore, Hyderabad, Cochin, Ludhiana, Thane, Pune, Kolhapur and in overseas USA, Texas, Houston.
