Cement Gypsum Rust TileClean
- Part number
- RXSOL-67-8685-025
- Category
- Construction Chem
- Brand
- RXSOL
Overview
Highly concentrated cleaner, very effective cleaning material and solvent to remove CEMENT, GYPSUM, RUST and DIRT from TILES, CERAMIC, CONCRETE, STONE, IRON and STEEL etc. When normal cleaning procedures are not enough to clean ceramic tile and grout. This product is very effective for tile and grout cleaning. This industrial strength acid cleaner will remove embedded mineral deposits and carbonaceous soils such as rust, calcium, urine stains, soap scum and efflorescence from man-made tile and cement grout. Can be used to etch hard-to-clean grout by removing a super fine layer, leaving your grout sparkling bright and clean.
Blended with latest emulsifier technology formulation with corrosion inhibitors.
Technical specifications
pH: <1.0 pH ready to use
Applications
RXSOL-67-8685-025 Cement Gypsum Rust TileClean removes cement, gypsum, rust and dirt from floors, roofs, swimming pools, bathrooms, kitchens, fountains and falls etc.
RXSOL-67-8685-025 Cement Gypsum Rust TileClean is used for final cleaning wash to remove cement, gypsum, rust & dirt after the construction of the building and before carpeting the floors.
RXSOL-67-8685-025 Cement Gypsum Rust TileClean is used for perfect cleaning of surfaces to be painted and roofs to be coated by waterproof coatings and other materials.
RXSOL-67-8685-025 Cement Gypsum Rust TileClean is also used to wash out cement, concrete, rust & dirt from concrete mixers and other such cement mortar carrying and mixing equipments.
RXSOL-67-8685-025 Cement Gypsum Rust TileClean has an additional quality Unlike any other product it does not harm most of the painted surfaces. Dirt, rust, cement, & gypsum can be removed from painted surfaces, conditionally the base of paint is strong and stable.
Dosage and directions
Directions for Use RXSOL-67-8685-025 Cement Gypsum Rust TileClean
-
Pre-wet the surface to be cleaned with clean water.
-
Take a plastic bucket and prepare the cleaning solution by mixing RXSOL-67-8685-025 Cement Gypsum Rust TileClean with clean water in a ratio of 1 part product (by volume) to 1–6 parts water, depending on the severity of cement, gypsum, rust, or dirt to be removed.
-
Apply the prepared solution to the surface and scrub using a medium-hard brush. Repeat the application if required to achieve better results.
-
Thoroughly rinse the cleaned surface with clean water.
Additional Note (for Iron Surfaces) RXSOL-67-8685-025 Cement Gypsum Rust TileClean
After cleaning iron surfaces, rinse thoroughly with clean water, allow the surface to dry completely, and then spray a light coat of diesel oil to provide temporary protection against rust formation.
Coverage: One Ltrs diluted solution will covers 120 sf per area.
Dilution: 50 ml - 250 ml can be dilutedwith water to make 1 Ltr solution.
The product is easy to mix (1 part water/1 part cleaner), and can be applied it to the grout with a small scrub brush. Applying it to one area at a time, then clean with wet sponge, later followed by a quick mopping. Tiles & grout will give full strength of shine and cleaning effect.
Additionals USES :::
Also can be use for cleaning of fiberglass shower, This product Effectively cleans grease, hard water/lime/stains Highly recommend to clean up fiberglass showers!
pH: <1.0 pH ready to use
Coverage: One gallon makes up to 17 gallons of ready to use solution for approximately 400 sf per diluted gallon.
Dilution: 8 - 32 oz. per 1 Gallon of Water
Characteristics and notes
Not recommended for use on most natural stone.
Other Same family Products :::
1) Tiles And Grout Cleaner ( Restoration ) ::: http://rxmarine.com/Tiles-Grout-Restore-Cleaner
2) Porcelain Bowl Tiles Cleaner ( Brute Thick ) ::: http://rxmarine.com/Porcelain-Bowl-Tiles-Cleaner
3) Ceramic Tiles Mosaic Stain Remover ::: http://rxmarine.com/Ceramic-Tile-Mosaic-Floor-Stain-Remover
5) Tiles Grout Alkaline Cleaner ::: www.rxmarine.com/Tiles-Grout-Alkaline-Cleaner
6) StoneTiles Cleaner Wipes ::: http://rxmarine.com/Stone-Tiles-Cleaner-Wipes
7) Tiles Cleaner ::: http://rxmarine.com/Tile-Cleaner
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name |
Tile And Grout Cleaner Restoration |
| Product Type | RXSOL-41-8685-025 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333/ 5555 / 9999 / 27611360 / 27815540 |
| Fax | +91 22 2781 1318 :::AOH :0091 9322594669 |
| rxsolchemicals@gmail.com |
Ingredients:
CAS # Percentage Chemical Name
506-89-8 <60% Organic Salt
111-76-2 <2% Ethylene glycol monobutyl ether
OSHA Regulatory Status:
This SDS contains valuable information critical to the safe handling and proper use of this product. This SDS should be
retained and available for employees and other users of this product.
Route of Entry:Eyes; Skin; Inhalation; Ingestion;
Target Organs: Eyes; Skin;
Inhalation:Minimal respiratory tract irritation may occur with exposure to a large amount of material
Skin Contact:May Cause Irritation.
Eye Contact: May Cause Irritation.
Ingestion:Small amounts swallowed incidental to normal handling operations are not likely to cause injury; swallowing amounts larger than that may cause temporary injury.
HMIS III-ratings (scale 0-4): Health = 1, Fire = 0, Physical Hazard = 0
Inhalation: If symptoms develop, move victim to fresh air. If symptoms persist, obtain medical attention.
Skin Contact: Wash with soap and water. If irritation persists consult medical personnel.
Eye Contact: Immediately flush eyes with large amounts of water for at least 15 minutes, lifting eyelids
occasionally to facilitate irrigation. Get immediate medical attention.
Ingestion:If swallowed, DO NOT induce vomiting unless directed to do so by medical personnel. If injured party is conscious, give two glasses of water. Seek medical attention.
Flash Point: >212ºF
Flash Point Method:Closed Cup
Wear self contained breathing apparatus and other protective clothing. Use any standard agent - choose the one most appropriate for type of surrounding fire.
Keep away from drains and ground water. Keep all unnecessary personnel away. Spill area may be slippery. Pick up excess with inert absorbant material and place into separate waste container. Ventilate Area and Wash Spill Site After Material Pickup is Complete. Consult an expert on disposal of recovered material and ensure conformity to local disposal regulations.
Handling Precautions: Avoid contact with eyes, skin, or clothing; Consider normal working hygiene. Handle with care and avoid spillage on the floor (slippage). Keep away from sources of ignition; wash thoroughly after handling.
Storage Requirements: Store out of reach of children; keep container closed; store in a cool well-ventilated place away from strong oxidizing or alkaline product.
Engineering Controls: Normal room ventilation is satisfactory for limited use.
Protective Equipment: HMIS PP, X Consult your supervisor for special instructions
| Appearance: |
Clear Amber |
Boiling Point: | N/D |
| Physical State: | Liquid |
Freezing/Melting Pt.: |
N/D |
| Odor: | Sharp acidic | Solubility: | Soluble |
| pH: | <1 | Spec Grav./Density: | 9.43 |
| Vapor Pressure: | N/D | ||
|
Vapor Density: |
N/D |
Stability:Product is stable under normal conditions.
Conditions to avoid:None Known
Materials to avoid (incompatability):None Known
Hazardous Decomposition products:Exposure to fire may liberate carbon dioxide, carbon monoxide, organic acids, and other unidentified thermal decomposition products from this product or itspackaging.
Hazardous Polymerization: Will not occur.
Route of Entry: Eye contact, and Skin absorption/contact
Effects of Acute Overexposure to Product:
Eye Contact: Causes eye irritation, redness, tearing and blurred vision
Skin Contact: Causes skin irritation, defatting and dermatitis
Inhalation: Inhalation of mist or vapor may cause temporary respiratory irritation; temporary central nervous system
effects including dizziness, weakness, fatigue, nausea, and headache.
Ingestion: May cause temporary gastrointestinal irritation with nausea, vomiting and diarrhea.
None of the components in this product are listed by NTP, IARC or OSHA as a carcinogen.
Refer to Section 6 for information regarding accidental releases and Section 15 for regulatory reporting information
Dispose of in accordance with local regulations.
Refer to bill of lading or container label for DOT or other transportation hazard classification. Ship in accordance with 49 CFR parts 100-185.
COMPONENT / (CAS/PERCENT)/ CODES
*Organic Salt (506898 <60%) TSCA
*Ethylene glycol monobutyl ether (111762 <2%) MASS, OSHAWAC, PA, TSCA, TXAIR, WHMIS
REGULATORY KEY DESCRIPTIONS
All components are listed on TSCA
MASS = MA Massachusetts Hazardous Substances List
OSHAWAC = OSHA Workplace Air Contaminants
PA = PA Right-To-Know List of Hazardous substances
TXAIR = TX Air Contaminants with Health Effects Screening level
WHMIS = Workplace Haz Mat Info Sys Canada
This document is prepared in accordance with 29 CFR 1910.1200. The purpose of this section is to ensure that the hazards of all chemicals produced or imported are evaluated, and that information concerning their hazards is transmitted to employers and employees.
All information appearing herein is based upon data obtained from the raw material manufacturer and/or recognized technical sources. While the information above is believed to be true and accurate, the author makes no representations as to its accuracy or sufficiency. Conditions of use are beyond the manufacturer's control; therefore the users are responsible to verify this data under their own particular conditions, applications and regulations to determine if the product is suitable for their particular purposes. The users assume all risks of product use, handling, disposal, reliance upon, publication or use of the information contained herein. This information applies only to the product designated above and does not necessarily apply to its use in combination with other materials, products, chemical compounds, structures or processes.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
Tiles And Grout Cleaner ( Restoration ) manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Tiles And Grout Cleaner ( Restoration ) at a competitive price from us. We have ready stock of Tiles And Grout Cleaner ( Restoration ) in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
