Chlorinated Detergent
- Part number
- RXSOL-12-1215-025
- Category
- Detergent & Soap
- Brand
- RXSOL
Overview
RXSOL Chlorinated Detergent is a highly efficient, cost-effective, detergent which is designed for use in the food processing industry. It is a free rinsing, concentrated liquid cleaning detergent with chlorine that, when applied through a mechanical CIP system, provides excellent results on many hard to remove soils. RXSOL Chlorinated Detergent is allowed for use as a cleaning agent in food processing plants on all stainless steel surfaces. RXSOL Chlorinated Detergent is effective in the cleaning of dairy plants, seafood, meat, beverage and poultry plants.
Technical specifications
pH |||
| 12.5 | 13.5 |
|---|
Specific Gravity |||
| 1.3 | 1.35 |
|---|
Applications
RXSOL Chlorinated Detergent is formulated from an alkaline hypochlorite based chemical treatment. This highly “built” cleaning detergent is extremely effective for the removal of a diverse range of materials such as proteins and soil. RXSOL Chlorinated Detergent is a low foaming cleaning product proven to be hard water tolerant and suitable for use with soft metals. RXSOL Chlorinated Detergentis an ideal choice for use in CIP (Cleaning in Place) and power wash / spray wash systems.
Dosage and directions
The dosage rate will depend on the specific application and our technical consultants can advise on the ideal level of dosage and testing required for individual systems. Use water at ambient to 50 oC.
When cleaning milk tanks, trays or packing machines by CIP, wash at 40 – 50 oC for 10 – 20 minutes.
Rinse all surfaces thoroughly with clean water.
Do NOT allow neat product to contact soft metal surfaces.
Avoid mixing with solutions containing hypochlorite.
Manual Cleaning 0.5-1% 5-10ml / litre of water
Foam Cleaning 1-2% 10-20ml / litre of water
Characteristics and notes
Benefit
- High performance detergent for CIP cleaning food manufacturing facilities and production equipment
- Suitable for use in food manufacturing premises
- Low foaming chlorinated detergent that is suitable for food applications
- Excellent soil removal
- Very effective in the removal of protein
- Hard water tolerant
- Soft metal safe
- Suitable for CIP and power washing / spray wash systems
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | Chlorinated Detergent |
| Part Number | RXSOL-12-1215-025 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 27815540 / 41 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com | |
| Website | www.rxmarine.com |
| Name of Substance | Cas Number | Wight % |
| Sodium Metasilicate | 10213-79-3 | 10 - 15% |
| Sodium Hypochlorite | 7681-52-9 | 15 - 20% |
| Sodium Hydroxide | 1310-73-2 | 1 - 5% |
| Surfactant | Proprietory | 5 - 10% |
| Hazard Statements |
Causes severe skin burns and serious eye damage. May be corrosive to metals. |
| Precautionary statements prevention | P280 Wear protective gloves/ protective clothing/ eye protection/ face protection. |
| Precautionary statements response |
Do not breathe dust or mist. P260. Wash skin thoroughly after handling. P264 .Wear protective gloves/clothing and face protection. P280.IF SWALLOWED: Rinse mouth. Do NOT induce vomiting P301 + P330 + P331 .IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse the skin with water. P303 + P361 + P353.IF INHALED: Remove person to fresh air and keep comfortable for |
| Eye Contact |
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Immediate medical attention is required |
| Skin Contact | In case of contact, immediately flushes skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Cover the irritated skin with an emollient. Cold water may be used.Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention. |
| Inhalation: | Move to fresh air. If breathing is difficult, give oxygen. Get medical attention immediately if symptoms occur. |
| Ingestion: | Do not induce vomiting. Obtain medical attention.If vomiting occurs, lean patient forward or place on left side (head-down position, if possible) to maintain an open airway and prevent aspiration. |
| Notes to Physician | Treat symptomatically |
| Flammability | Non flamable. |
| Flash Point | No information available. |
| Suitable extinguishing media | Water spray. Carbon dioxide (CO 2). Dry chemical. Chemical foam. |
|
Hazardous combustion products |
Thermal decomposition can lead to release of irritating gases and vapors. |
| Protective Equipment | As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear. |
| Specific Hazards Arising from the Chemical | Not combustible. Ambient fire may liberate hazardous vapours. |
| Spillage | Use appropriate tools to put the spilled solid in a convenient waste disposal container. If necessary: dilute with water. |
| Personal Protection | Avoid contact with skin, eyes or clothing. Use personal protective equipment as required. |
| Enviromental Precaution | Do not rinse spill onto the ground, into storm sewers or bodies of water |
| Methods and materials for containment and cleaning | Prevent further leakage or spillage if safe to do so. Contain and collect spillage with non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite) and place in container for disposal according to local / national regulations (see Section 13) |
| Handling |
Handle in accordance with good industrial hygiene and safety practice. Wash thoroughly after handling. |
| Storage | Keep containers tightly closed in a dry, cool and well-ventilated place. Keep out of the reach of children. Keep from freezing. |
| Advice on general occupational hygiene | Acids. Strong oxidizing agents. Ammonia. Reactive metals such as aluminum, zinc and tin. |
| Engineering Control | Provide good general ventilation. If work practices generate dust, fumes, gas, vapors or mists which expose workers to chemicals above the occupational exposure limits, local exhaust ventilation or other engineering controls should be considered. Eye wash stations and shower facilities should be readily accessible in areas where the product is handled. |
| Personal Protection | Wear splash goggles. For severe use-conditions, wear a face shield over the goggles. Skin and Body Protection: Wear rubber or other chemical-resistant gloves. Use of impervious apron, boots and other protective equipment should be considered in order to prevent or minimize contact with this product. |
| Other Protection Measure |
Not required with expected use. If occupational exposure limits are exceeded or respiratory irritation occurs, use of a NIOSH/MSHA approved respirator suitable for the use-conditions and chemicals in Section 3 should be considered. |
| General Hygiene Considerations | Wash hands and any exposed skin thoroughly after handling.See 29 CFR 1910.132-138 for further guidance. |
Gloves Suit
| Form | Liquid |
| Colour | Clear / Yellow |
| Odour | Slight Chlorine |
| Odor Threshold | Not Applicable |
| pH | 12.5 - 13.5 |
| Melting Point/Freezing Point | No Information Available |
| Boiling Point | 100 °C / 212 °F |
| Flash Point | No Information Available |
| Evaporation Rate | < 1 (Butyl acetate = 1) |
| Flammability (solid, gas) | Non Flammable |
| Explosive limits | No Data Available |
| Vapour pressure | No Data Available |
| Vapour Density | No Data Available |
| Specific Gravity | 1.1 - 1.15 |
| Partition coefficient | No data available |
| Explosive properties | None |
| Solubility | Soluble in water |
| Ignition temperature | No information available. |
| Auto-ignition temperature | No information available. |
| Viscosity, dynamic | No information available. |
| Reactivity | This material is considered to be non-reactive under normal conditions of use. |
| Stability | Stable under normal conditions. |
| Possibility of hazardous reactions |
Contact with acids releases chlorine gas. Contact with ammonia releases chloramine gas. Contact with aluminum or other reactive metals may release hydrogen gas. |
| Conditions to avoid | High temperature accelerates decomposition of product. |
| Incompatible materials | Acids. Strong oxidizing agents. Ammonia. Reactive metals such as aluminum, zinc and tin. |
| Hazardous Decomposition Products | May include carbon monoxide, carbon dioxide (CO2) and other toxic gases or vapors. Releases oxygen when heated to decomposition which may intensify fire. |
| Hazardous Polymerization | Hazardous polymerization does not occur.Hazardous Reactions None under normal processing. |
| Rout Of Entry | Inhalation. Ingestion. |
| Toxicity to Animal |
Acute oral toxicity |
| Toxic Effects on Human | Eye Contact: Pain, redness, swelling of the conjunctiva and tissue damage. Eye contact may cause permanent damage. Skin Contact: Pain, redness, blistering and possible chemical burn. Inhalation: Irritation or damage to the mucus membranes of the respiratory tract. Nasal discomfort and coughing. Ingestion: Damage or chemical burns to mouth, throat and stomach. Pain, nausea, vomiting and diarrhea. |
| Chronic Effects |
Data not available or insufficient for classification. |
| Eco Toxicity | Not Available |
| COD and BOD 5 | Not Available |
| Products Biodegradation: | No Information available |
| Mobility in soil | No Information available |
| Results of PBT and vPvB assessment | PBT/vPvB assessment not available as chemical safety assessment not required/not conducted. |
| Other adverse effects | Harmful. Forms corrosive mixtures. Discharge into the environment must be avoided. |
| Waste treatment Method | Waste material must be disposed of in accordance with the national and local regulations. Leave chemicals in original containers. No mixing with other waste. Handle uncleaned containers like the product itself |
DOT/TDG/IATA
| UN Number | UN 1760 |
| Proper shipping name | Corrosive Liquids, n.o.s.,(contains sodium hydroxide, sodium hypochlorite) |
| Hazard Class | 8 |
| Packing group | II |
IMDG/IMO
| UN Number | UN 1760 |
| Proper shipping name | Corrosive Liquids, n.o.s.,(contains sodium hydroxide, sodium hypochlorite) |
| Hazard Class | 8 |
| Packing group | II |
| Fedral and State Regulation |
(Toxic Substance Control Act Section 8(b) Inventory).All chemical substances in this product are included on or exempted from listing on the TSCA Inventory of Chemical Substances. |
| Other Regulation |
SARA 313 This product does not contain listed substances above the "de minimus" level |
| WHMIS (Canada) | CLASS E: Corrosive solid. |
| DSCL (EEC) |
R8- Contact with combustible material may cause fire. R31- Contact with acids liberates toxic gas. R36/38- Irritating to eyes and skin. S28- After contact with skin, wash immediately with plenty of water. S36/37/39- Wear suitable protective clothing, gloves and eye/face protection. S45- In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). |
| HMIS | |
| Health Hazard | : 3 |
| Fire Hazard | : 0 |
| Reactivity | : 0 |
| Personal Protection | : E |
| Fire : | |
| Health Hazard | : 1 |
| Fire Hazard | : 0 |
| Reactivity | : 0 |
| Specific Hazard | : |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, We make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and weassume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if RX Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |
Availability
Chlorinated Detergent manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Chlorinated Detergent at a competitive price from us. We have ready stock of Chlorinated Detergent in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
