RXSOL CHEMO PHARMA International Navi Mumbai, India

Products

7,061 products across 71 categories for marine, industrial, water treatment and laboratory use.

Browse all products Product catalogue

Paint and Cleaning solvent

Chrome Polish Remover

Chrome stripping solution is designed to effectively and easily remove the chrome finish from Non-ferrous surface.
Part number
RXSOL-18-1013-026
Brand
RXSOL
RXSOL

Overview

Chrome stripping solution is designed to effectively and easily remove the chrome finish from Non-ferrous. Light chrome deposits can be removed by stripping in acidic chrome solution. Heavy deposits on steel use electrolysis.

Excellent product for removal of Chrome from tough polish surfaces.

Applications

To remove the chrome coat submerge the chrome-plated material in the RXSOL Chrome Polish Remover acid solution and allow the Solution to react with chrome surface. The chrome coating will come off after a while and should be duly removed from the solution.

NOTE : Keeping the material in the concentrated RXSOL Chrome Polish Remover solution longer than necessary can damage it. After stripping chrome off the material, thoroughly wash with soap and water and rinse. Leave to dry. Also note that Only use metal buckets or containers resistant to the effects of the acid in preparing the acid solution.

Dosage and directions

The process of removal is similar to using RXSOL Chrome Polish Remover acid solution – immersing the chrome-plated materials in the solution and allowing it to act. The result is also stripping of chrome off the materials immersed in the solution. After this, one must wash the material with soap and water, rinse, and leave to dry.
NOTE : After Removal of Chrome Coating Just dunk it in a container of water plus baking soda or Soap Solution after you’re done with the acid bath, then give it a good rinsing.

Characteristics and notes

You must wear eye protection, good chemical resistant gloves, and be very careful while using this product.

Safety and SDS

Read the safety data sheet before handling. Wear suitable gloves and eye protection.

View safety data sheet
Product Name : RXSOL-18-1013-25
Product Type : Paint Remover

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Phone : +91 22 65113333 / 5555 / 9999 / 27611360
Fax : +91 22 2781 1318 :::AOH :0091 9821214367
Email : rxsolchemicals@gmail.com

Inhalation

:

Corrosive to respiratory system.

Skin Contact

:

Causes severe burns.

Eye Contact

:

Causes severe burns,may cause permanent damage to eye.

Ingestion

:

Corrosive , causes burns to gastro tract  .

Enviromental Hazards

:

None known

Inhalation

:

Remove to  fresh-air , rest , treat    symptomatically.Obtain medical attention immediately.

Skin Contact

:

Wash off affected area  immediately with  plenty  of after obtain medical attention.

Eye Contact

:

Speed is essential , Immediately  gently  irrigate with clean water for at least 15- minuts above eye ball And keep eyelids wide open and apart whilst irrigating.Obtain medical attention immediately .

Ingestion

:

Do not induce vomiting with out medical advice . 

Extinguising Media

:

Not expected to burn . Use extinguishing media appropriate for surrounding fire.

Fire & Explosion Hazard

:

Not Applicable.

Handling

:

Preventcontactwith Skin, Eyes &  Clothing . If clothin is contaminated remove clothing and thoroughly was theaffected area . Use with adequate ventilation .

Storage Condition

:

Keep container tightly closed in a Cool , Well-ventillated place. Storage for more than two years is not recommended .

NOTE: This Paint – Remover ( RXSOL-MPC-005) particularly used in aircraft- industry  because  of  its  non-reactivity  with Aluminium, Copper , Brass and their Alloys.

Request the signed SDS as PDF