Drilling Fluids & Mud Oil Field chemicals
Corroision Inhibitor KGS 7
- Part number
- RXSOL-81-8277-210
- Brand
- RXSOL
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | Corroision Inhibitor KGS 7 |
| Part Number | RXSOL-81-8277-210 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 27815540 - 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com | |
| Website | www.rxmarine.com |
| Name of Substance | Weight % | TLV |
| Isopropyl alcohol | 1 - 5% | 400 PPM |
| Thiourea | 1 -5 % | Not established |
| Alkylpyridinium Salts | 10 -30% | Not established |
| Oxyalkylated alkylphenols | 1 - 5 % | Not established |
| Signal Word | None |
| Hazard Statements | H335 May cause respiratory irritation. |
| Precautionary statements - prevention |
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection. P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P304 + P340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. |
| Skin Contact | Wash off immediately with plenty of water for at least 15 minutes. Immediate medical attention is required. |
| Eye Contact | Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. In the case of contact with eyes, rinse imme diately with plenty of water and seek medical advice. |
| Inhalation: |
If not breathing, give artificial respiration. Do not use mouth-to-mouth method if victim ingested or inhaled the substance; give artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. Move to fresh air. Immediate medical attention is required. |
| Ingestion: | If ingested : Harmful. May cause headache, gastrointestinal disturbances, dizziness and nausea. |
| Notes to Physician | Treat symptomatically |
| Flash Point | NA |
| Suitable extinguishing media | Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Cool closed containers exposed to fire with water spray. |
| Flammability Limit (% by vol. in air)Lower(LEL) | No information available |
| Flammability Limit (% by vol. in air) Upper (UEL) | No information available |
| Sensitivity to Static Discharge | No information available |
| Protective Equipment and Precautions for Firefighters | As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear. Use SCBA. keep fire exposed containers cool using water spray |
| Other fire or explosion hazards : | None known. |
| Small Spillage | Dilute with water and mop up, or absorb with an inert dry material and place in an appropriate waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements. |
| Personal Protection | Use personal protective equipment. Ensure adequate ventilation. Evacuate personnel to safe areas. Keep people away from and upwind of spill/leak. Remove all sources of ignition. Take precautionary measures against static discharges. |
| Enviromental Precaution | Environmental Precautions Should not be released into the environment. Do not flush into surface water or sanitary sewer system. |
| Methods and materials for containment and cleaning | Soak up with inert absorbent material. Keep in suitable, closed containers for disposal. |
| Handling | Wear personal protective equipment. Do not get in eyes, on skin, or on clothing. Use only under a chemical fume hood. Do not breathe vapors or spray mist. Do not ingest. Keep away from open flames, hot surfaces and sources of ignition. Use only non-sparking tools. To avoid ignition of vapors by static electricity discharge, all metal parts of the equipment must be grounded. Take precautionary measures against static discharges. |
| Storage | Keep containers tightly closed in a dry, cool and well-ventilated place. Keep away from heat and sources of ignition. |
| Hygiene measures | Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance. |
| Engineering Control | Ensure adequate ventilation, especially in confined areas. Ensure that eyewash stations and safety showers are close to the workstation location. Use explosion-proof electrical/ventilating/lighting/equipment |
| Personal Protection |
Eye/face Protection : Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin and body protection : Wear appropriate protective gloves and clothing to prevent skin exposure. Long sleeved clothing.Flame retardant antistatic protective clothing. Respiratory Protection : Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. |
| Hygiene Measures | Handle in accordance with good industrial hygiene and safety practice. |
| Exposure Limits | None |
Gloves Suit
| Form | Liquid |
| Colour | Drak Red / Brown |
| Odour | Caracteristic Oour |
| pH | 3 |
| Freezing Point | NDA |
| Boiling Point | NDA |
| Flash Point | NA |
| Evaporation Rate | NDA |
| Vapour pressure | Not Established |
| Vapour Density | NA |
| Secific Gravity | 1.04-1.11 |
| Solubility in Water | Soluble |
| Recativity Hazard | None known, based on information available |
| Stability | Product is stable. |
| Possibility of hazardous reactions | No known hazardous reactions. |
| Conditions to avoid | Heat, sparks and open flames |
| Incompatible materials | NDA |
| Hazardous Decomposition Products | Oxides of nitrogen, Oxides of sulphur |
| Hazardous Polymerization | Hazardous polymerization does not occur. Hazardous Reactions None under normal processing |
| Acute Toxicity | NA |
| Acute dermal | NDA |
| Skin corrosion | Skin irritation Causes severe burns. |
| Toxic Effects on Humans | In case of skin contact (irritant), of inhalation. |
| Special Remarks | Harmful. May cause headache, gastrointestinal disturbances, dizziness and nausea. May result in irritation or burn of mouth and digestive tract |
| COD and BOD 5 | Not Available |
| Products of Biodegradation: | Possibly hazardous short term degradation products are not likely. However, long term degradation products may arise. |
| Mobility in soil | Will likely be mobile in the environment due to its water solubility. |
| Results of PBT and vPvB assessment | Substance does not meet the criteria for PBT or vPvB according to Regulation (EC) No 1907/2006, Annex XIII. |
| Other adverse effects | Harmful effect due to pH shift. Discharge into the environment must be avoided. |
| Waste treatment Method | Waste material must be disposed of in accordance with the national and local regulations. Leave chemicals in original containers. No mixing with other waste. Handle uncleaned containers like the product itself |
DOT/TDG Land transport (ADR): NOT REGULATED FOR TRANSPORT OF DANGEROUS GOODS
| UN Number | Not Applicable |
| Proper shipping name | Noit Applicable |
| Hazard Class | Not Applicable |
| Packing group | Not Applicable |
| Special Provision | Not Applicable |
| Limited Quantity | Not Applicable |
Air transport (ICAO-IATA / DGR): NOT REGULATED FOR TRANSPORT OF DANGEROUS GOODS
| UN Number | Not Applicable |
| Proper shipping name | Noit Applicable |
| ICAO/IATA Hazard Class | Not Applicable |
| ICAO/IATA Packing group | Not Applicable |
| ICAO/IATASpecial Provision | Not Applicable |
| ICAO/IATA Limited Quantity | Not Applicable |
IMDG/IMO Sea transport (IMDG-Code / GGVSee): NOT REGULATED FOR TRANSPORT OF DANGEROUS GOODS
| UN Number | Not Applicable |
| Proper shipping name | Noit Applicable |
| IMDG Hazard Class | Not Applicable |
| IMDG Packing group | Not Applicable |
| IMDG Special Provision | Not Applicable |
| IMDG Limited Quantity | Not Applicable |
Transport in bulk according to Annex II of MARPOL and the IBC code : Not Applicable.
|
Safety Regulatory Information |
• Hazard designation of product: Xi Irritant. |
| HMIS | |
| Health Hazard | : 1 |
| Fire Hazard | : 0 |
| Reactivity | : 0 |
| Personal Protection | : H |
| Fire : | |
| Health Hazard | : 1 |
| Fire Hazard | : 0 |
| Reactivity | : 0 |
| Specific Hazard | : ND |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |
Availability
Corroision Inhibitor KGS 7 manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Corroision Inhibitor KGS 7 at a competitive price from us. We have ready stock of Corroision Inhibitor KGS 7 in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
