EDTA DI SODIUM SALT N/50 SOLN
EDTA DISODIUM SALT N/50 SOLN
- Part number
- RXSOL-60-6604-531
- Category
- Lab Chemical
- Brand
- RXSOL
Overview
The last addition of EDTA then removes the metal ion from its
complex with the indicator, producing a color change
Applications
The disodium salt of EDTA is preferred in hardness estimation mainly because it is more soluble in aqueous solutions which allows release of the EDTA ligand into solution to react.
Dosage and directions
Edetate disodium injection forms chelates with the cations of calcium and many divalent and trivalent metals. Because of its affinity for calcium, edetate disodium will produce a lowering of the serum calcium level during intravenous infusion.
Characteristics and notes
EDTA salts are more soluble in water as the pH increases: the more EDTA there is in the salt form, the higher the pH of a water solution, and therefore, the higher the room temperature solubility.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name |
|
|
| Product Type | E.D.T.A. DISODIUM SALT N/50 SOLUTION | |
| Revised date |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Chennai, Visakhapatnam, Kolkata, Fujairah, Muscat Barka
| Phone | +91 22 27815541 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
Substance / Preparation : Preparation. Hazardous
component(s) : This product is not hazardous but contains hazardous components.
Substance name Contents CAS No
ethylene diamine tetra > 0.01 < 1 % 6381-92-6
acetic acid disodium salt Water : > 99 % 7732-18-5
3.1. Classification of the substance or mixture
Classification EC 67/548 or EC 1999/45
Not classified.
Hazard Class and Category Code(s), Regulation (EC) No 1272/2008 (CLP)
Not classified.
3.2. Label elements
Labelling EC 67/548 or EC 1999/45
Not classified.
Symbol(s) : None. R Phrase(s) : None.
S Phrase(s) : None. Labelling Regulation EC 1272/2008 (CLP)
Not classified.
3.3. Other hazards
Other hazards : The substance does not fulfil the criteria to
be identified as PBT substance or vPvB substance according
to Annex XIII of Regulation REACH.
4.1. Description of first aid measures
Inhalation : Assure fresh air breathing. Allow the victim to rest.
Skin contact : Remove affected clothing and wash all exposed
skin area with mild soap and water, followed by warm water rinse.
Eye contact : Rinse immediately with plenty of water.
Obtain medical attention if pain, blinking or redness persist.
Get medical advice. Remove contact lenses, if present and easy to do.
Continue rinsing. If eye irritation persists : Rinse cautiously with water for several minutes.
Ingestion : Obtain emergency medical attention. Rinse mouth. Do NOT induce vomiting.
4.2. Most important symptoms and effects, both acute and delayed
Symptoms relating to use : Causes serious eye irritation.
4.3. Indication of any immediate medical attention and special treatment needed
General information : Never give anything by mouth to an unconscious person.
If you feel unwell, seek medical advice (show the label where possible).
5.1. Extinguishing media
Suitable extinguishing media : Foam. Dry powder. Carbon dioxide. Water spray. Sand.
Unsuitable extinguishing media : Do not use a heavy water stream.
Surrounding fires : Use water spray or fog for cooling exposed containers.
5.2. Special hazards arising from the substance or mixture
Hazardous combustion products : Under fire conditions, hazardous fumes will be present.
5.3. Advice for fire-fighters
Protection against fire : Do not enter fire area without proper protective equipment,
including respiratory protection. Special procedures : Exercise caution when fighting
any chemical fire. Avoid (reject) fire-fighting water to enter environment.
6.1. Personal precautions, protective equipment and emergency procedures
For emergency responders : Equip cleanup crew with proper protection. Ventilate area.
For non-emergency personnel : Evacuate unnecessary personnel.
6.2. Environmental precautions
Environmental precautions : Prevent entry to sewers and public waters.
Notify authorities if product enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
Clean up methods : Soak up spills with inert solids, such as clay or diatomaceous
earth as soon as possible. Collect spillage. Store away from other materials.
6.4. Reference to other sections
See section 8. Exposure controls/personal protection
7.1. Precautions for safe handling
Handling : Wash thoroughly after handling.
Technical protective measures : Provide good ventilation
in process area to prevent formation of vapour.
7.2. Conditions for safe storage, including any incompatibilities
Storage : Keep only in the original container in a cool, well ventilated place.
Keep container closed when not in use. Storage - away from : Strong bases.
Strong acids. Sources of ignition. Direct sunlight.
7.3. Specific end use(s)
Specific end use(s) : None.
8.1. Exposure controls
Personal protection : Avoid all unnecessary exposure.
• Respiratory protection : Wear approved mask.
• Hand protection : Wear protective gloves.
• Eye protection : Chemical goggles or safety glasses.
• Others : When using, do not eat, drink or smoke.
8.2. Control parameters
Occupational Exposure Limits : No data available.
9.1. Information on basic physical and chemical properties
Physical state at 20 °C : Liquid.
Odour : Characteristic.
Odour threshold : No data available.
pH value : No data available.
Melting point [°C] : No data available.
Decomposition point [°C] : N/A
Critical temperature [°C] : No data available.
Auto-ignition temperature [°C] : No data available.
Flammability (solid, gas) : N/A
Flash point [°C] : No data available.
Boiling point [°C] : N/A
Initial boiling point [°C] : No data available.
Final boiling point [°C] : No data available.
Evaporation rate : N/A
Vapour pressure [20°C] : No data available.
Vapour pressure mm/Hg : N/A
Vapour density : N/A
Density [g/cm3] : 1
Relative density, gas (air=1) : N/A
Relative density, liquid (water=1) : N/A
Solubility in water [% weight] : Soluble in water
Solubility in water : No data available.
Log Pow octanol / water at 20°C : No data available.
Solubility : N/A Viscosity at 40°C
[mm2/s] : No data available.
9.2. Other information
Explosive properties : N/A
Explosion limits - upper [%] : No data available.
Explosion limits - lower [%] : No data available.
Oxidising properties : No data available.
10.1. Reactivity
Reactivity : Not established.
10.2. Chemical stability
Chemical stability : Stable under
recommended storage conditions.
10.3. Possibility of hazardous reactions
Hazardous reactions : Not established. 1
0.4. Conditions to avoid
Conditions to avoid : Direct sunlight.
Extremely high or low temperatures.
10.5. Incompatible materials
Materials to avoid : Strong acids. Strong bases.
10.6. Hazardous decomposition products
Hazardous decomposition products : Fumes.
Carbon monoxide. Carbon dioxide.
11.1. Information on toxicological effects
Toxicity information : The product has been not fully tested. The calculated
risk has been done under the requirements of the EU regulations. Acute toxicity
• Inhalation : Based on available data, the classification criteria are not met.
• Dermal : Based on available data, the classification criteria are not met.
• Ingestion : Based on available data, the classification criteria are not met.
Corrosion : Based on available data, the classification criteria are not met.
Irritation : Causes serious eye irritation. Sensitization : Based on available data,
the classification criteria are not met.
Mutagenicity : Based on available data, the classification criteria are not met.
Carcinogenicity : Based on available data, the classification criteria are not met.
Toxic for reproduction : Based on available data, the classification criteria are not met.
STOT-single exposure : Based on available data, the classification criteria are not met.
STOT-repeated exposure : Based on available data, the classification criteria are not met.
Aspiration hazard : Based on available data, the classification criteria are not met.
12.1. Toxicity
Toxicity information : The product has been not fully tested.
The calculated risk has been done under the requirements of the EU regulations.
12.2. Persistence - degradability
Persistence - degradability : Biodegradable.
12.3. Bioaccumulative potential Bioaccumulative
potential : Not established.
12.4. Mobility in soil
Mobility in soil : Not established.
12.5. Results of PBT and vPvB assessment
Results of PBT and vPvB assessment : The substance
does not fulfil the criteria to be identified as PBT substance
or vPvB substance according to Annex XIII of Regulation REACH.
12.6. Other adverse effects
Environmental precautions : Avoid release to the environment.
13.1. Waste treatment methods
General : Avoid release to the environment.
Dispose in a safe manner in accordance with
local/national regulations.
14.1. Land transport (ADR-RID)
General information : Not regulated.
14.2. Sea transport (IMDG) [English only]
General information : Not regulated.
14.3. Air transport (ICAO-IATA) [English only]
General information : Not regulated.
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
Safety, health and environmental : Ensure all national/local regulations are observed.
regulations/legislation specific for the substance or mixture
REACH Restrictions - Annex XVII : The components of this product are not subject to restrictions.
REACH Authorisation - Annex XIV : The components of this product are not subject to authorization.
15.2. Chemical Safety Assessment
Chemical Safety Assessment : It has not been carried out.
Abbreviations and acronyms : PBT: persistent, bioaccumulative and toxic. vPvB: very persistent and very bioaccumulative
Sources of key data used : REGULATION (EC) No 1272/2008 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
of 16 December 2008 on classification, labelling and packaging of substances and mixtures, amending and repealing Directives
67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006 Further information : None. In accordance with
REACH Regulation (CE) Nº 1907/2006 and with CLP Regulation (CE) Nº 1272/2008
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable..
Availability
[EDTA DI SODIUM SALT N/50 SOLN] manufacturers, suppliers, exporters in Mumbai, Gandhidham, Kolkata, Varanasi, Visakhapatnam, Chennai, Fujairah, Dubai, Canada BC, Barka, Sohar, Muscat, Oman.
Lab chemicals manufacturers, suppliers, exporters in India, UAE Middle East, Barka, Sohar, Muscat, Oman, Canada.
[EDTA DI SODIUM SALT N/50 SOLN] is available in small packing as well as in bulk. Buy premium quality [EDTA DI SODIUM SALT N/50 SOLN] and other lab chemicals from one of the most trusted brands.
