EYE & FACE PROTECTION
- Part number
- RXSOL-64-2621-001
- Category
- Safety Item
- Brand
- RXSOL
Overview
SAPECTACLES & SAFETY GOGGLES
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | RXSOL-64-2610-001 |
| Product Type | Coil & Duct Disinfectant |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
| INGREDIENT | CAS No. | UNITS |
| -dimethyl benzyl ammonium chloride | Mixture | -- |
| DANGER | Toxic if swallowed. May cause allergy or asthma symptoms or breathing difficulties if inhaled; May cause an allergic skin reaction. May cause damage to organs; Causes severe skin burns and eye damage; Very toxic to aquatic life; Toxic to terrestrial vertebrates. |
|
If INHALED |
If overcome by exposure, remove victim to fresh air immediately. Give oxygen or artificial respiration as needed. Obtain emergency medical attention. Prompt action is essential. |
|
If on SKIN |
Immediately wash with soap and water. Remove and wash any contaminated clothing. |
|
If in EYES |
Flush eyes with large amounts of water for 15 minutes. Get medical attention if irritation persists. |
| If SWALLOWED | If swallowed, call a physician immediately. Only induce vomiting at the instruction of a physician. Never give anything by mouth to an unconscious person. |
| FLASH POINT | None |
| EXTINGUSING MEDIA | Non-flammable. Use agents appropriate for surrounding fires |
| SPECIAL FIRE FIGHTING PROCEDURES | Wear self-contained full face piece breathing apparatus and other protective clothing. Hazardous decomposition products possible (see Section 10). |
| UNUSUAL FIRE AND EXPLOSION HAZARDS | None |
|
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED |
Remove all sources of ignition. Use absorbent materials to prevent footing hazard and to contain. Ventilate area with natural or explosion-proof, forced air ventilation. Avoid flushing into sewers, drains, waterways, and soil. Wear protective clothing and respiratory protection during cleanup. |
|
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING |
Keep container closed and upright when not in use. Do not store near heat, sparks, or open flames. |
| OTHER PRECAUTIONS | Avoid prolonged or repeated contact with skin or clothing. Empty containers may contain residues; treat as if full and observe all products precautions. Do not reuse empty containers. |
|
RESPIRATORY PROTECTION (SPECIFY TYPE) |
In confined, poorly ventilated areas, use NIOSH/MSHA approved air purifying or supplied air respirators during soldering operations until fumes have dissipated. |
| VENTILATION - LOCAL EXHAUST | Acceptable |
| SPECIAL | Explosion proof |
| MECHANICAL (GENERAL) | Acceptable |
| OTHER | N/A |
| PROTECTIVE GLOVES | Wear rubber gloves. |
| EYE PROTECTION | Safety glasses (ANSI Z-87.1 or equivalent) |
| OTHER PROTECTIVE CLOTHING OR EQUIPMENT | Chemical resistant coveralls recommended. |
| WORK/HYGIENIC PRACTICES | Where use can result in skin contact, wash exposed areas thoroughly before eating, drinking, smoking, or leaving work area. Launder contaminated clothing before reuse. |
| BOILING POINT | 212 F (100 C) @ 760mm Hg |
| SPECIFIC GRAVITY (H20 = 1) | 1.04 |
| VAPOR PRESSURE (mm Hg) | N/D |
| MELTING POINT | N/A |
| VAPOR DENSITY (AIR = 1) | <1 |
| EVAPORATION RATE (ETHYL ACETATE = 1) | >1 |
| APPEARANCE/ODOR | Clear Liquid / Eucalyptus Odour |
| SOLUBILITY IN WATER | Soluble |
|
STABILITY |
Stable |
|
CONDITIONS TO AVOID |
None |
|
INCOMPATIBILITY (MATERIALS TO AVOID) |
Heat, sparks and open flames. |
| HAZARDOUS DECOMPOSITION PRODUCTS | CO, CO, and fragmented hydrocarbons. |
| HAZARDOUS POLYMERIZATION | Will not occur. |
| CHRONIC HEALTH HAZARDS | No ingredient in this product is an IARC, NTP or OSHA listed carcinogen. |
| Ingredient Name | Oral-Rat LD50 | Inhalation-Rat LC50 |
| dimethyl benzyl ammonium chloride | 240 mg/kg | N/D |
| Ingredient Name | Food Chain Concentration Potential | WATERFOWL TOXICITY |
BOD |
AQUATIC TOXICITY |
| dimethyl benzyl ammonium chloride | None | None | None | None |
| Waste Classification | Non-regulated liquid waste. |
| Disposal Method | Dispose of absorbed materials and liquid waste in accordance with all local, state and federal regulations. |
|
DOT |
Non-regulated |
| OCEAN (IMDG) | Non-regulated |
| AIR (IATA) | Non-regulated |
| WHMIS (CANADA) | Non-regulated |
|
Ingredient Name |
SARA 313 | TSCA Inventory | CERCLA RQ | RCRA Code |
| dimethyl benzyl ammonium chloride | No | Yes | N/A | N/A |
The information contained in this safety data sheet is given in good faith. It is accurate to the best of our knowledge and belief and represents the most up to date information. The information given in this data sheet does not constitute or replace the users own assessment of workplace risk as required by other health and safety legislation.
--------------------------------------------------------------------------------------------------------------------------------------------------
| Product Name | RXSOL-64-2610-001 |
| Product Type | Air Filter Cleaner Degreaser |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
| INGREDIENT | CAS No. | UNITS |
| Alkyl amine oxide | 308062-30-8 | -- |
| Propylene Glycol | 57-55-6 | -- |
| Sodium Metasilicate | 10213-79-3 | -- |
| Trilon M Powder | 164462-16-2 | -- |
| Food Grade Colour Dye |
| SUMMARY OF ACUTE HAZARDS | Irritation to eyes, nose, and throat; drowsiness, narcosis, tremors, and other CNS effects at high concentrations. Skin irritation, dermatitis, and defatting. |
| ROUTE OF EXPOSURE, SIGNS AND SYMPTOMS | |
| INHALATION |
Nasal and respiratory irritation, dizziness, narcosis, headache, nausea, CNS depression, and unconsciousness. |
| EYE CONTACT |
Watering, blurred vision, inflammation, and irritation which can result in corneal injury. |
| SKIN CONTACT | Irritation, dermatitis. |
| INGESTION |
Nausea, vomiting; CNS depression; irritation of gastrointestinal tract, liver and peritoneal wall; lung congestion. |
| SUMMARY OF CHRONIC HAZARDS | Skin irritation, contact dermatitis, and defatting. |
| MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE | Individuals with pre-existing or chronic diseases of the eyes, skin, respiratory system, cardiovascular system, gastrointestinal system, liver, or kidneys may have increased susceptibility to excessive exposure. |
|
If INHALED |
If overcome by exposure, remove victim to fresh air immediately. Give oxygen or artificial respiration as needed. Obtain emergency medical attention. Prompt action is essential. |
|
If on SKIN |
Immediately wash with soap and water. Remove and wash any contaminated clothing. |
|
If in EYES |
Flush eyes with large amounts of water for 15 minutes. Get medical attention if irritation persists. |
| If SWALLOWED | If swallowed, call a physician immediately. Only induce vomiting at the instruction of a physician. Never give anything by mouth to an unconscious person. |
| FLASH POINT | 145 F(63 C) SETA CC, Negative Flame Extension |
| EXTINGUSING MEDIA | Foam, dry chemical, CO2, or water fog. |
| SPECIAL FIRE FIGHTING PROCEDURES | Wear self-contained full face piece breathing apparatus and full body protective clothing. Hazardous decomposition products possible (see Section 10). Evacuate area. Dike area as run-off may create additional environmental contamination. |
| UNUSUAL FIRE AND EXPLOSION HAZARDS | Foam or water can cause frothing. Heat may build up pressure and rupture containers. |
|
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED |
Remove all sources of ignition. Use absorbent materials to prevent footing hazard and to contain. Ventilate area with natural or explosion-proof, forced air ventilation. Avoid flushing into sewers, drains, waterways, and soil. Wear protective clothing and respiratory protection during cleanup. |
|
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING |
Shake well before using. Keep away from heat, sparks and open flames. |
| OTHER PRECAUTIONS | Avoid prolonged or repeated contact with skin or clothing. Empty containers may contain residues; treat as if full and observe all products precautions. Do not reuse empty containers. |
|
RESPIRATORY PROTECTION (SPECIFY TYPE) |
In confined, poorly ventilated areas, use NIOSH/MSHA approved air purifying or supplied air respirators during soldering operations until fumes have dissipated. |
| VENTILATION - LOCAL EXHAUST | Acceptable |
| SPECIAL | Explosion proof |
| MECHANICAL (GENERAL) | Acceptable |
| OTHER | N/A |
| PROTECTIVE GLOVES | Wear rubber gloves. |
| EYE PROTECTION | Safety glasses (ANSI Z-87.1 or equivalent) |
| OTHER PROTECTIVE CLOTHING OR EQUIPMENT | Chemical resistant coveralls recommended. |
| WORK/HYGIENIC PRACTICES | Where use can result in skin contact, wash exposed areas thoroughly before eating, drinking, smoking, or leaving work area. Launder contaminated clothing before reuse. |
| BOILING POINT | >212 F (100 C) @ 760mm Hg |
| SPECIFIC GRAVITY (H20 = 1) | 1.04 |
| VAPOR PRESSURE (mm Hg) | N/D |
| MELTING POINT | N/A |
| VAPOR DENSITY (AIR = 1) | <1 |
| EVAPORATION RATE (ETHYL ACETATE = 1) | >1 |
| APPEARANCE/ODOR | Clear Blue Liquid |
| SOLUBILITY IN WATER | Soluble |
|
STABILITY |
Stable |
|
CONDITIONS TO AVOID |
None |
|
INCOMPATIBILITY (MATERIALS TO AVOID) |
Oxidizers, acids and bases. |
| HAZARDOUS DECOMPOSITION PRODUCTS | CO, CO, and fragmented hydrocarbons. |
| HAZARDOUS POLYMERIZATION | Will not occur. |
| CHRONIC HEALTH HAZARDS | No ingredient in this product is an IARC, NTP or OSHA listed carcinogen. |
| Ingredient Name | Oral-Rat LD50 | Inhalation-Rat LC50 |
| Propylene Glycol | N/D | N/D |
| Sodium Metasilicate | 1153 mg/kg | N/D |
| Ingredient Name | Food Chain Concentration Potential | WATERFOWL TOXICITY |
BOD |
AQUATIC TOXICITY |
| Propylene Glycol | N/D | N/D | N/D | N/D |
| Sodium Metasilicate | N/D | N/D | N/D | N/D |
| Waste Classification | Non-regulated liquid waste |
| Disposal Method | Dispose of absorbed materials and liquid waste in accordance with all local, state and federal regulations. |
| Road & Rail Transport |
Not classified as a Dangerous Goods under NZS 5433:2007 Transport of Dangerous Goods on land. |
| Marine Transport | Not classified as Dangerous Goods by the criteria of the international Air Transport Association (IATA) NON DANGEROUS GOODS. |
|
Ingredient Name |
SARA 313 | TSCA Inventory | CERCLA RQ | RCRA Code |
| Propylene Glycol | No | Yes | N/A | N/A |
| Sodium Metasilicate | No | Yes | N/A | N/A |
The information contained in this safety data sheet is given in good faith. It is accurate to the best of our knowledge and belief and represents the most up to date information. The information given in this data sheet does not constitute or replace the users own assessment of workplace risk as required by other health and safety legislation.
--------------------------------------------------------------------------------------------------------------------------------------------------
| Product Name | RXSOL-64-2610-001 |
| Product Type | Bio-Pan Biocide Tablets |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
| INGREDIENT | CAS No. | UNITS |
| Di-N-alkyl(C8-10)dimethylammonium chloride | 68424-95-3 | -- |
| SUMMARY OF ACUTE HAZARDS | Based on the available animal toxicity information, it is anticipated that this material will cause mild or no skin or eye irritation upon direct or prolonged contact. No human overexposure data is available for this material. |
| ROUTE OF EXPOSURE, SIGNS AND SYMPTOMS | |
| INHALATION | None known. |
| EYE CONTACT | May cause eye irritation |
| SKIN CONTACT | May cause skin irritation. |
| INGESTION | May cause Nausea and vomiting. |
| SUMMARY OF CHRONIC HAZARDS | None known |
| MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE | No effects indicated. |
|
If INHALED |
If overcome by exposure, remove victim to fresh air immediately. Give oxygen or artificial respiration as needed. Obtain emergency medical attention. Prompt action is essential. |
|
If on SKIN |
Immediately wash with soap and water. Remove and wash any contaminated clothing. |
|
If in EYES |
Flush eyes with large amounts of water for 15 minutes. Get medical attention if irritation persists. |
| If SWALLOWED | If swallowed, call a physician immediately. Only induce vomiting at the instruction of a physician. Never give anything by mouth to an unconscious person. |
| FLASH POINT | None |
| EXTINGUSING MEDIA | Non-flammable. Use agents appropriate for surrounding fires. |
| SPECIAL FIRE FIGHTING PROCEDURES | Wear self-contained full face piece breathing apparatus and other protective clothing. Hazardous decomposition products possible (see Section 10). |
| UNUSUAL FIRE AND EXPLOSION HAZARDS | None |
|
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED |
Use absorbent materials to prevent footing hazard and to contain. Avoid flushing into sewers, drains, waterways, and soil. Wear protective clothing and respiratory protection during cleanup. |
|
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING |
Keep container closed and upright when not in use. |
| OTHER PRECAUTIONS | Avoid prolonged or repeated contact with skin or clothing. Empty containers may contain residues; treat as if full and observe all products precautions. Do not reuse empty containers. |
|
RESPIRATORY PROTECTION (SPECIFY TYPE) |
None required. |
| VENTILATION - LOCAL EXHAUST | Acceptable |
| SPECIAL | N/A |
| MECHANICAL (GENERAL) | Acceptable |
| OTHER | N/A |
| PROTECTIVE GLOVES | Wear rubber gloves. |
| EYE PROTECTION | Safety glasses (ANSI Z-87.1 or equivalent) |
| OTHER PROTECTIVE CLOTHING OR EQUIPMENT | Plastic apron and sleeves. |
| WORK/HYGIENIC PRACTICES | Where use can result in skin contact, wash exposed areas thoroughly before eating, drinking, smoking, or leaving work area. Launder contaminated clothing before reuse. |
| BOILING POINT | >212 F (100 C) @ 760mm Hg |
| SPECIFIC GRAVITY (H20 = 1) | 1.00 |
| VAPOR PRESSURE (mm Hg) | N/D |
| MELTING POINT | N/A |
| VAPOR DENSITY (AIR = 1) | N/D |
| EVAPORATION RATE (ETHYL ACETATE = 1) | N/D |
| APPEARANCE/ODOR | white tablet soap like texture |
| SOLUBILITY IN WATER | Soluble |
|
STABILITY |
Stable |
|
CONDITIONS TO AVOID |
None |
|
INCOMPATIBILITY (MATERIALS TO AVOID) |
None known. |
| HAZARDOUS DECOMPOSITION PRODUCTS | CO, CO, and fragmented hydrocarbons. |
| HAZARDOUS POLYMERIZATION | Will not occur. |
| CHRONIC HEALTH HAZARDS | No ingredient in this product is an IARC, NTP or OSHA listed carcinogen. |
| Ingredient Name | Oral-Rat LD50 | Inhalation-Rat LC50 |
| Di-N-alkyl(C8-10)dimethylammonium chloride | 240 mg/kg | N/D |
| -eye irritation (rabbit) | non-irritant (primary irritation index = 0.0) |
| -skin irritation ( rabbit) | non-irritant (primary irritation index = 0.0) |
| Ingredient Name | Food Chain Concentration Potential | WATERFOWL TOXICITY |
BOD |
AQUATIC TOXICITY |
| Di-N-alkyl(C8-10)dimethylammonium chloride | None | None | None | None |
| Waste Classification | Non-regulated liquid waste. |
| Disposal Method | Dispose of in accordance with local, state and federal regulations. |
| DOT | Non-regulated |
| OCEAN (IMDG) | Non-regulated |
| AIR (IATA) | Non-regulated |
| WHMIS (CANADA) | Non-regulated |
|
Ingredient Name |
SARA 313 | TSCA Inventory | CERCLA RQ | RCRA Code |
| This is an EPA registered pesticide (EPA Registration No. 6836-152-51219) | ||||
| Di-N-alkyl(C8-10)dimethylammonium chloride | No | Yes | N/A | N/A |
The information contained in this safety data sheet is given in good faith. It is accurate to the best of our knowledge and belief and represents the most up to date information. The information given in this data sheet does not constitute or replace the users own assessment of workplace risk as required by other health and safety legislation.
--------------------------------------------------------------------------------------------------------------------------------------------------
| Product Name | RXSOL-64-2610-001 |
| Product Type | BIO-WASH (TOWER WASH) |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
| INGREDIENT | CAS No. | UNITS |
| lauryl dimethyl amine oxide | 961788-90-7 | -- |
| Polylene Glycol Butyl Ether | 57018-52-7 | -- |
| Sodium Metasilicate | 6834-92-0 | -- |
| Oil of Eucalyptus | 8000-48-4 | -- |
| dimethyl benzyl ammonium chloride | 8001-54-5 | -- |
| SUMMARY OF ACUTE HAZARDS | Irritation to eyes, nose, and throat; drowsiness, narcosis, tremors, and other CNS effects at high concentrations. Skin irritation, dermatitis, and defatting. |
| ROUTE OF EXPOSURE, SIGNS AND SYMPTOMS | |
| INHALATION | Nasal and respiratory irritation, dizziness, narcosis, headache, nausea, CNS depression, and unconsciousness. |
| EYE CONTACT |
Watering, blurred vision, inflammation, and irritation which can result in corneal injury. |
| SKIN CONTACT | Irritation, dermatitis. |
| INGESTION |
Nausea, vomiting; CNS depression; irritation of gastrointestinal tract, liver and peritoneal wall; lung congestion. |
| SUMMARY OF CHRONIC HAZARDS | Skin irritation, contact dermatitis, and defatting. |
| MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE | Individuals with pre-existing or chronic diseases of the eyes, skin, respiratory system, cardiovascular system, gastrointestinal system, liver, or kidneys may have increased susceptibility to excessive exposure. |
|
If INHALED |
If overcome by exposure, remove victim to fresh air immediately. Give oxygen or artificial respiration as needed. Obtain emergency medical attention. Prompt action is essential. |
|
If on SKIN |
Immediately wash with soap and water. Remove and wash any contaminated clothing. |
|
If in EYES |
Flush eyes with large amounts of water for 15 minutes. Get medical attention if irritation persists. |
| If SWALLOWED | If swallowed, call a physician immediately. Only induce vomiting at the instruction of a physician. Never give anything by mouth to an unconscious person. |
| FLASH POINT | 145 F(63 C) SETA CC, Negative Flame Extension |
| EXTINGUSING MEDIA | Foam, dry chemical, CO2, or water fog. |
| SPECIAL FIRE FIGHTING PROCEDURES | Wear self-contained full face piece breathing apparatus and full body protective clothing. Hazardous decomposition products possible (see Section 10). Evacuate area. Dike area as run-off may create additional environmental contamination. |
| UNUSUAL FIRE AND EXPLOSION HAZARDS | Foam or water can cause frothing. Heat may build up pressure and rupture containers. |
|
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED |
Remove all sources of ignition. Use absorbent materials to prevent footing hazard and to contain. Ventilate area with natural or explosion-proof, forced air ventilation. Avoid flushing into sewers, drains, waterways, and soil. Wear protective clothing and respiratory protection during cleanup. |
|
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING |
Shake well before using. Keep away from heat, sparks and open flames. |
| OTHER PRECAUTIONS | Avoid prolonged or repeated contact with skin or clothing.Empty containers may contain residues; treat as if full and observe all products precautions. Do not reuse empty containers. |
|
RESPIRATORY PROTECTION (SPECIFY TYPE) |
In confined, poorly ventilated areas, use NIOSH/MSHA approved air purifying or supplied air respirators during soldering operations until fumes have dissipated. |
| VENTILATION - LOCAL EXHAUST | Acceptable |
| SPECIAL | Explosion proof |
| MECHANICAL (GENERAL) | Acceptable |
| OTHER | N/A |
| PROTECTIVE GLOVES | Wear rubber gloves. |
| EYE PROTECTION | Safety glasses (ANSI Z-87.1 or equivalent) |
| OTHER PROTECTIVE CLOTHING OR EQUIPMENT | Chemical resistant coveralls |
| WORK/HYGIENIC PRACTICES | Where use can result in skin contact, wash exposed areas thoroughly before eating, drinking, smoking, or leaving work area. Launder contaminated clothing before reuse. |
| BOILING POINT | >212 F (100 C) @ 760mm Hg |
| SPECIFIC GRAVITY (H20 = 1) | 1.04 |
| VAPOR PRESSURE (mm Hg) | N/D |
| MELTING POINT | N/A |
| VAPOR DENSITY (AIR = 1) | <1 |
| EVAPORATION RATE (ETHYL ACETATE = 1) | >1 |
| APPEARANCE/ODOR | Clear Green Liquid / Mild Odour |
| SOLUBILITY IN WATER | Soluble |
| Ph | 13 |
|
STABILITY |
Stable |
|
CONDITIONS TO AVOID |
None |
|
INCOMPATIBILITY (MATERIALS TO AVOID) |
Oxidizers, acids and bases. |
| HAZARDOUS DECOMPOSITION PRODUCTS | CO, CO, and fragmented hydrocarbons. |
| HAZARDOUS POLYMERIZATION | Will not occur. |
| CHRONIC HEALTH HAZARDS | No ingredient in this product is an IARC, NTP or OSHA listed carcinogen. |
| Ingredient Name | Oral-Rat LD50 | Inhalation-Rat LC50 |
| lauryl dimethyl amine oxide | 4.3 mg/kg | N/D |
| Polylene Glycol Butyl Ether | N/D | N/D |
| Sodium Metasilicate | 1153 mg/kg | N/D |
| Ingredient Name | Food Chain Concentration Potential | WATERFOWL TOXICITY |
BOD |
AQUATIC TOXICITY |
| lauryl dimethyl amine oxide | N/D | N/D | N/D | N/D |
| Polylene Glycol Butyl Ether | N/D | N/D | N/D | N/D |
| Sodium Metasilicate | N/D | N/D | N/D | N/D |
| dimethyl benzyl ammonium chloride | N/D | N/D | N/D | N/D |
| Waste Classification | Non-regulated liquid waste. |
| Disposal Method | Dispose of in accordance with local, state and federal regulations. |
| DOT | Non-regulated |
| OCEAN (IMDG) | Non-regulated |
| AIR (IATA) | Non-regulated |
| WHMIS (CANADA) | N/A |
|
Ingredient Name |
SARA 313 | TSCA Inventory | CERCLA RQ | RCRA Code |
| lauryl dimethyl amine oxide | No | Yes | N/A | N/A |
| Polylene Glycol Butyl Ether | No | Yes | N/A | N/A |
| Sodium Metasilicate | No | Yes | N/A | N/A |
| Oil of Eucalyptus | No | Yes | N/A | N/A |
The information contained in this safety data sheet is given in good faith. It is accurate to the best of our knowledge and belief and represents the most up to date information. The information given in this data sheet does not constitute or replace the users own assessment of workplace risk as required by other health and safety legislation.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
EYE & FACE PROTECTION manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of EYE & FACE PROTECTION at a competitive price from us. We have ready stock of EYE & FACE PROTECTION in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
