FLORISIL 60 100 MESH FOR COLUMN CHROMATOGRAPHY
- Part number
- RXSOL-60-6604-600
- Category
- Lab Chemical
- Brand
- RXSOL
Overview
.as column packing material in column chromatography.
.as an adsorbent in gas chromatography with electron capture detector (GC/ECD), capillary column chromatography, adsorption column chromatography.
.in clean-up procedures in gas chromatography-tandem mass spectrometry and GC-FID.
.as column packing material in column chromatography.
.as an adsorbent in gas chromatography with electron capture detector (GC/ECD), capillary column chromatography, adsorption column chromatography.
.in clean-up procedures in gas chromatography-tandem mass spectrometry and GC-FID.
.as column packing material in column chromatography.
.as an adsorbent in gas chromatography with electron capture detector (GC/ECD), capillary column chromatography, adsorption column chromatography.
.in clean-up procedures in gas chromatography-tandem mass spectrometry and GC-FID.
FLORISIL 60 100 MESH FOR COLUMN CHROMATOGRAPHY
.as column packing material in column chromatography.
.as an adsorbent in gas chromatography with electron capture detector (GC/ECD), capillary column chromatography, adsorption column chromatography.
.in clean-up procedures in gas chromatography-tandem mass spectrometry and GC-FID.
Applications
Florisil is a polar normal-phase chromatography packing that has been used for years for sample cleanup, particularly for removing fats and oils.
Dosage and directions
To prepare for use, place 100 ± 10 g of Florisil® into a 500-mL beaker and heat to 140 °C for approximately 16 hrs. After heating, transfer to a 500-mL reagent bottle. Tightly seal and cool to room temperature. When cool, add 3 ± 0.1 mL of organic free reagent water.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name |
|
||
| Product Type | FLORISIL ® 60 – 100 MESH FOR COLUMN CHROMATOGRAPHY | ||
| Revised date |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Chennai, Visakhapatnam, Kolkata, Fujairah, Muscat Barka
| Phone | +91 22 27815541 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
2.1 Substances
Substance name Contents CAS No
Magnesium silicate ------ 1343-88-0
Substance.
Contains no other components or impurities which will influence the classification of the
product.
3.1 Classification of the substance or mixture
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
3.2 Label elements
Not a hazardous substance or mixture.
3.3 Other hazards
This substance/mixture contains no components considered to be either persistent,
bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at
levels of 0.1% or higher.
4.1 Description of first aid measures
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration.
In case of skin contact
Wash off with soap and plenty of water.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water.
4.2 Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see
section 2.2) and/or in section 11
4.3 Indication of any immediate medical attention and special treatment needed
No data available
5.1 Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
5.2 Special hazards arising from the substance or mixture
Magnesium oxide, silicon oxides
5.3 Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
5.4 Further information No data available
6.1 Personal precautions, protective equipment and emergency procedures
Avoid dust formation. Avoid breathing vapours, mist or gas. For personal protection see
section 8.
6.2 Environmental precautions
No special environmental precautions required.
6.3 Methods and materials for containment and cleaning up
Sweep up and shovel. Keep in suitable, closed containers for disposal.
6.4 Reference to other sections
For disposal see section 13.
7.1 Precautions for safe handling
Provide appropriate exhaust ventilation at places where dust is formed. For precautions
see section 2.2.
7.2 Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Storage class (TRGS 510): Non Combustible Solids
7.3 Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated
8.1 Control parameters
8.2 Exposure controls
Appropriate engineering controls
General industrial hygiene practice.
Personal protective equipment
Eye/face protection
Use equipment for eye protection tested and approved under appropriate government
standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal
technique (without touching glove's outer surface) to avoid skin contact with this product.
Dispose of contaminated gloves after use in accordance with applicable laws and good
laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy
the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.
If used in solution, or mixed with other substances, and under conditions which differ
from EN 374, contact the supplier of the CE approved gloves. This recommendation is
advisory only and must be evaluated by an industria situation of anticipated use by our
customers. It should not be construed as offering an approval for any specific use
scenario.
Body Protection
Choose body protection in relation to its type, to the concentration and amount of
dangerous substances, and to the specific work-place., The type of protective equipment
must be selected according to the concentration and amount of the dangerous substance at
the specific workplace
. Respiratory protection
Respiratory protection is not required. Where protection from nuisance le (EN 143) dust
masks. Use respirators and components tested and approved under appropriate
government standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
No special environmental precautions required.
9.1 Information on basic physical and chemical properties
Odour Threshold : No data available
pH: No data available
Melting point/freezing point : > 1,500 °C - OECD Test Guideline 102
Initial boiling point and boiling range : No data available
Flash point Not applicable
Evaporation rate No data available
Flammability (solid, gas) No data available
Upper/lower flammability or explosive limits : No data available
Vapour pressure : No data available
Vapour density : No data available
Relative density: No data available
Water solubility : 0.127 g/l at 30 °C - soluble
Partition coefficient: noctanol/ water: No data available
Auto-ignition temperature : No data available
Decomposition temperature: No data available
Viscosity : No data available
Explosive properties Not explosive
Oxidizing properties The product has been shown not to be oxidizing in a test following
9.2 Other safety information
No data available
10.1 Reactivity
No data available
10.2 Chemical stability
Stable under recommended storage conditions.
10.3 Possibility of hazardous reactions
No data available
10.4 Conditions to avoid
No data available
10.5 Incompatible materials
Strong acids, Hydrogen fluoride
10.6 Hazardous decomposition products
Hazardous decomposition products formed under fire conditions. - Magnesium oxide,
silicon oxides
11.1 Information on toxicological effects
Acute toxicity
LD50 Oral - Rat - male and female - > 5,000 mg/kg(Silicic acid, magnesium salt)
LC50 Inhalation - Rat - male and female - 1 h - > 20 mg/l(Silicic acid, magnesium salt)
(OECD Test Guideline 403)
LD50 Dermal - Rabbit - male and female - > 2,000 mg/kg(Silicic acid, magnesium salt)
(OECD Test Guideline 402)
Skin corrosion/irritation
Skin - Rabbit(Silicic acid, magnesium salt)
Result: No skin irritation - 24 h
(Directive 67/548/EEC, Annex V, B.4.)
Serious eye damage/eye irritation
Eyes - Rabbit(Silicic acid, magnesium salt)
Result: No eye irritation - 72 h
(OECD Test Guideline 405)
Respiratory or skin sensitisation
No data available(Silicic acid, magnesium salt)
Germ cell mutagenicity
No data available(Silicic acid, magnesium salt)
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is
identified as probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
No data available(Silicic acid, magnesium salt)
Specific target organ toxicity - single exposure
No data available(Silicic acid, magnesium salt)
Specific target organ toxicity - repeated exposure
No data available
Aspiration hazard
No data available(Silicic acid, magnesium salt)
Additional Information
RTECS: Not available
12.1 Toxicity
No data available
12.2 Persistence and degradability
No data available
12.3 Bioaccumulative potential
No data available
12.4 Mobility in soil
No data available (Silicic acid, magnesium salt)
12.5 Results of PBT and vPvB assessment
This substance/mixture contains no components considered to be either persistent,
bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at
levels of 0.1% or higher.
12.6 Other adverse effects
No data available
13.1 Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company.
Contaminated packaging
Dispose of as unused product.
14.1 UN number
ADR/RID: - IMDG: - IATA: -
14.2 UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
14.3 Transport hazard class(es)
ADR/RID: - IMDG: - IATA: -
14.4 Packaging group
ADR/RID: - IMDG: - IATA: -
14.5 Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
14.6 Special precautions for user
No data available
15.1 Safety, health and environmental regulations/legislation specific for the
substance or mixture
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
15.2 Chemical safety assessment
For this product a chemical safety assessment was not carried out
Abbreviations and acronyms : PBT: persistent, bioaccumulative and toxic.
vPvB: very persistent and very bioaccumulative
Sources of key data used : REGULATION (EC) No 1272/2008 OF THE EUROPEAN
PARLIAMENT AND OF THE COUNCIL of 16 December 2008 on classification,
labelling and packaging of substances and mixtures, amending and repealing Directives
67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006
Further information : None.
In accordance with REACH Regulation (CE) Nº 1907/2006 and with CLP Regulation
(CE) Nº 1272/2008
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
FLORISIL 60 100 MESH FOR COLUMN CHROMATOGRAPHY manufacturers, suppliers, exporters in Mumbai, Gandhidham, Kolkata, Varanasi, Visakhapatnam, Chennai, Fujairah, Dubai, Canada BC, Barka, Sohar, Muscat, Oman.
Lab chemicals manufacturers, suppliers, exporters in India, UAE Middle East, Barka, Sohar, Muscat, Oman, Canada.
FLORISIL 60 100 MESH FOR COLUMN CHROMATOGRAPHY is available in small packing as well as in bulk. Buy premium quality FLORISIL 60 100 MESH FOR COLUMN CHROMATOGRAPHY and other lab chemicals from one of the most trusted brands.
