Ferrous Ammonium Sulfate
- Part number
- RXSOL-60-6122-500
- Category
- Metal Treatment
- Brand
- RXSOL
Overview
FERROUS AMMONIUM SULFATE supplier, Physically it can be identified as light green crystalline solid.
Technical specifications
| Physical State | Crystals |
| Color | Pale green |
| Odor | Odorless |
| pH | 3-5 (5% aqueous solution) |
| Vapor Pressure | No information found |
| Vapor Density | No information found |
| Evaporation Rate | Evaporation Rate |
| Viscosity | No information found |
| Boiling Point | Not available |
| Freezing/Melting Point | 100°C (decomposes) |
| Decomposition Temperature | 100-110°C |
| Solubility in water | 269 g/l @ 20°C |
| Specific Gravity/Density | 1.865 |
| Molecular Formula | FeSO4(NH4)2so46H2O |
| Molecular Weight | 392.14 |
Applications
It is used in medicine, chemical analysis and metallurgy.
Ferrous Ammonium Sulfate Hexahydrate ( Crystalline). Also know as Ammonium iron(II) sulfate, or Mohr's salt, is the inorganic compound with the formula (NH₄)₂Fe(SO₄)₂·6H₂O.
Dosage and directions
Formula Weight: 392.14
Linear Formula: Fe(NH4)2(SO4)2·6H2O
Molecular Formula: H8FeN2O8S2 · 6 H2O
Assay Percent Range: 98.5 to 101.5 %
Characteristics and notes
Soluble in water that forms weakly acidic solutions. Deliquesces in air.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | Ferrous Ammonium Sulfate |
| Part Number | RXSOL-19-6122-050 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA
| Phone | +91 22 20871200 - 1400 |
| Fax | +91 22 27612100 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com | |
| Website | www.rxmraine.com |
Substances
| Formula | (NH4)2Fe(SO4)2·6H2O |
| Molecular weight | 392,14 g/mol |
| CAS-No. | 7783-85-9 |
| EC-No. | 233-151-8 |
No components need to be disclosed according to the applicable regulations.
| Classification of the substance or mixture | Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008. |
| Label elements | No hazard pictogram, no signal word, no hazard statement(s), no precautionary statement(s) required |
| Other hazards | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
| If inhaled | After inhalation: fresh air. |
| In case of skin contact | In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower. |
| In case of eye contact | After eye contact: rinse out with plenty of water. Remove contact lenses. |
| If swallowed | After swallowing: make victim drink water (two glasses at most). Consult doctor if feeling unwell. |
| Most important symptoms and effects, both acute and delayed | The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 |
| Indication of any immediate medical attention and special treatment needed | No data available |
| Suitable extinguishing media | Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. |
| Unsuitable extinguishing media | For this substance/mixture no limitations of extinguishing agents are given. |
| Special hazards arising from the substance or mixture |
Nitrogen oxides (NOx)
Sulfur oxides
Iron oxides
Not combustible.
Fire may cause evolution of:
nitrogen oxides, Sulfur oxides
Ambient fire may liberate hazardous vapours.
|
| Advice for firefighters | In the event of fire, wear self-contained breathing apparatus. |
| Further information | Suppress (knock down) gases/vapors/mists with a water spray jet. Prevent fire extinguishing water from contaminating surface water or the ground water system. |
| Personal precautions, protective equipment and emergency procedures | Advice for non-emergency personnel: Avoid inhalation of dusts. Evacuate the danger area, observe emergency procedures, consult an expert. For personal protection see section 8. |
| Enviromental Precaution | Do not let product enter drains. |
|
Methods and materials for containment and cleaning |
Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up dry. Dispose of properly. Clean up affected area. Avoid generation of dusts. |
| Reference to other sections | For disposal see section 13. |
| Precautions for safe handling | For precautions see section 2.2. |
| Conditions for safe storage, including any incompatibilities | |
| Storage conditions |
Tightly closed. Dry.
Recommended storage temperature see product label.
|
| Storage class | Storage class (TRGS 510): 13: Non Combustible Solids |
| Specific end use(s) | Apart from the uses mentioned in section 1.2 no other specific uses are stipulated |
| Eye/face protection | Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses |
| Skin protection |
This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell,
Internet: www.kcl.de).
Full contact
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min
Material tested:KCL 741 Dermatril® L
Splash contact
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min
Material tested:KCL 741 Dermatril® L
|
| Respiratory protection |
Required when dusts are generated.
Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system.
Recommended Filter type: Filter type P1
The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer.
These measures have to be properly documented.
|
| Control of environmental exposure | No special environmental precautions required. |
| Physical state | Solid |
| Color | Blue Green |
| Odor | Odorless |
| Melting point/freezing point | No data available |
| Initial boiling point and boiling range | No data available |
| Flammability (solid, gas) | The product is not flammable. |
| Upper/lower flammability or explosive limits | No data available |
| Flash point | Not applicable |
| Autoignition temperature | No data available |
| Decomposition temperature | No data available |
| pH | 3 - 5 at 50 g/l at 20 °C |
| Viscosity |
Viscosity, kinematic: No data available
Viscosity, dynamic: No data available
|
| Water solubility | 269 g/l at 20 °C - completely soluble |
|
Partition coefficient:
n-octanol/water
|
No data available |
| Vapor pressure | No data available |
| Density | 1,86 g/cm3 at 20 °C |
| Relative density | No data available |
| Relative vapor density | No data available |
| Particle characteristics | No data available |
| Explosive properties | No data available |
| Oxidizing properties | None |
| Other safety information | |
| Bulk density | ca.900 kg/m3 |
| Reactivity | No data available |
| Chemical stability | The product is chemically stable under standard ambient conditions (room temperature) |
| Possibility of hazardous reactions | No data available |
| Conditions to avoid |
Light. Air
No information available |
| Incompatible materials |
No data available
|
| Hazardous decomposition products | In the event of fire: see section 5 |
| Acute toxicity |
LD50 Oral - Rat - 3.250 mg/kg
Remarks: (RTECS)
(anhydrous substance)
Inhalation: No data available
Dermal: No data available
|
| Skin corrosion/irritation | No data available |
| Serious eye damage/irritation | No data available |
| Respiratory or skin sensitization | No data available |
| Germ cell mutagenicity | No data available |
| Carcinogenicity | No data available |
| Reproductive toxicity | No data available |
| Specific target organ toxicity - single exposure |
No data available
|
| Specific target organ toxicity - repeated exposure | No data available |
| Aspiration hazard | No data available |
| Additional Information | |
| Endocrine disrupting properties Product | |
| Assessment | The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. |
| Toxicity | |
| Toxicity to fish |
LC50 - Fundulus heteroclitus (Mummichog) - 315 mg/l - 48 h
Remarks: (ECOTOX Database)
(anhydrous substance)
|
| Persistence and degradability | No data available |
| Bioaccumulative potential | No data available |
| Mobility in soil | No data available |
| Results of PBT and vPvB assessment | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
| Endocrine disrupting properties Product | No data available |
| Other adverse effects | Discharge into the environment must be avoided. |
| Waste treatment methods | No data available |
| UN number | ADR/RID: IMDG: IATA: |
| UN proper shipping name |
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
|
| Transport hazard class(es) | ADR/RID: IMDG: IATA: |
| Packaging group | ADR/RID: IMDG: IATA: |
| Environmental hazards | ADR/RID: no IMDG Marine pollutant: no IATA: no |
| Special precautions for user | No data available |
| Further information | Not classified as dangerous in the meaning of transport regulations. |
| Safety, health and environmental regulations/legislation specific for the substance or mixture | This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006. |
| Chemical Safety Assessment | For this product a chemical safety assessment was not carried out |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and weassume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |
Availability
Ferrous ammonium sulfate supplier in Mumbai, Gandhidhdam, Chennai, Visakhapatnam, Kolkata, Chennai, Fujairah, Ajman, Dubai, Sharjah, Abu dhabi, Muscat - oman.
