Gloss Tyre Enhancer
- Part number
- RXSOL-41-4109-010
- Category
- Automobiles
- Brand
- RXSOL
Overview
This highly concentrated quick drying rubber dressing is recommended for re-newing the appearance of tires, floor mats, and other rubber and plastic trim used on automobiles and trucks. It provides a temporary waterproofing to these surfaces which will not wash off in rain or with water alone.
Technical specifications
Other Valuable grade :::
Nu-look Tire Dressing TYRE ( http://rxmarine.com/nu-look-tire-dressing ) Part No. RXSOL-41-4107-025
Tyre Polish -All Vinyl Conditoner ( http://rxmarine.com/condition-all-vinyl-conditoner ) Part No. RXSOL-41-4108-025
Applications
The concentrated rubber dressing may be applied as received, undiluted for maximum luster, or diluted with 3 parts water for economy. Surface to be treated with rubber dressing should be cleaned and degreased with a good, industrial strength product, rinsed well with clear water, and allowed to dry completely. Apply product with a trigger sprayer, pump-up sprayer, or a sponge. Allow to air dry. Repeat procedure for higher gloss.
Characteristics and notes
CAUTION: Protect product from freezing. Do not ingest. If this does occur, drink large volumes of water. For eye or skin contact, flush area with clear water for 15 minutes. Keep container sealed when not in use to prevent contamination. Rinse empty container before discarding in an authorized landfill site. Keep out of the reach of children, Do not ingest. FOR INDUSTRIAL & INSTITUTIONAL USE ONLY
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | RXSOL-41-4109-010 |
| Product Type | Gloss Tire Enhancer |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
HAZARDOUS INGREDIENTS
| INGREDIENTS | Conc % W/W | CAS no | EXPOSITION CL50 | LETHAL DOSE INGESTION DL50 |
| Hydrotreated Parafine | 1 -5 | 64741-65-7 | N.D. | N/D |
N/A
|
Contact with Eyes |
Immediately flush eyes with plenty of water for at least 15 minutes. Occasionally lifting upper and lower lids. Get medical attention at once. |
| Contact with skin |
It should be rinsed off with water. |
|
|
If this product is swallowed, do not induce vomiting. If victim is conscious give plenty of water to drink. Get medical attention at once. |
|
Inhalation |
Move exposed person to fresh air. If irritation persists. Get medical attention promptly. |
|
Flammable |
No |
| Condition | Nothing |
|
Extinction |
Chemical foam, carbon dioxide, water |
|
Flash Point (open cup) |
Superior at 95° C |
| Autoinflammation temperature | N/D |
| Dangerous product made by combustion | Carbon oxide |
| Eyes Protection | You don't need a safety google with normal using. |
| Respiratory Protection | You don't need a safety mask with normal using. |
| Skin Protection | You don't need a safety wearing with normal using. |
| Technical installation | Put good ventilation for close chamber for eliminate a vapour could be concentrated. |
| Measures if a leaks and spills |
Take off the leaks and put in a identify drums Rinse the floor with water |
| Elimination |
Conform with federal and provincial laws Put in a closed material. Protect against the freeze |
N/A
N/A
| Physical State | Clear liquid |
| Boiling Point | > 100°C |
| Odor | Light Cherry Scent |
| pH | S/O |
| Freeze Point | -30 °C |
| % Volatile | N/D |
| Specific Density (20°C) | 0.82 g/cc |
| Vapor Pressure | N/D |
| Water solubility | yes |
| Vapor Density | N/D |
|
Chemical stability |
Stable in normal use condition |
|
Incompatibility with other products |
Red uctor, oxidant and acid product |
| Conditions |
If the product enter in contact with an acid matter, there may be in heat and carbon dioxide |
|
Polymerization |
None |
|
Decomposition product |
Carbon oxide |
| Exposition limit | N/D |
|
Absorption way |
Inhalation ( ) Eyes (X) Skin ( ) Ingestion (X) |
|
Chronics exposure with the product |
N/D |
| Inhalation | No Object |
| Eyes | Irritation. |
| Skin | Should be irritating if the product is apply directly on skin |
| Ingestion | Harmful |
| Cancerogenicity | None |
| Synergics products | None |
N/A
N/A
N/A
N/A
N/A
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
Gloss Tyre Enhancer manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Gloss Tyre Enhancer at a competitive price from us. We have ready stock of Gloss Tyre Enhancer in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
