HEXAMINE AR

Substance / Preparation : methenamine; hexamethylenetetramine

CAS No :100-97-0

Substance.                           

Substance name                                                    Contents              CAS No

methenamine; :                                                        100 %               100-97-0 

hexamethylenetetramine  

Contains no other components or impurities which will influence the classification of the product. 

3.1. Classification of the substance or mixture

Classification EC 67/548 or EC 1999/45 Classification : F; R11 R43

Hazard Class and Category Code(s), Regulation (EC) No 1272/2008 (CLP)

Health hazards : Skin sensitisation - Category 1 - Warning (CLP : Skin Sens. 1)

H317 Physical hazards : Flammable solids - Category 1 - Danger (CLP : Flam. Sol. 1) H228

3.2. Label elements

Labelling EC 67/548 or EC 1999/45

Symbol(s) : F : Highly f

lammable Xn : Harmful   

R Phrase(s) : R11 : Highly flammable.

R42 : May cause sensitization by inhalation.

R43 : May cause sensitization by skin contact.

S Phrase(s) : S2 : Keep out of the reach of children.

S16 : Keep away from source of  ignition-No smoking.

S22 : Do not breath dust. S24 : Avoid contact with skin.

S37 : Wear suitable gloves. Labelling Regulation EC 1272/2008 (CLP)

Hazard pictograms

Signal words : Danger

Hazard statements : H228 : Flammable solid.

H317 : May cause an allergic skin reaction.

Precautionary statements

• General : P102: Keep out of reach of children.

P103: Read label before use.

P101: If medical advice is needed, have product container or label at hand.

• Prevention : P240: Ground/bond container and receiving equipment.

P241: Use explosion-proof electrical, ventilating, lighting, …, equipment.

P210: Keep away from heat, sparks, open flames or hot surfaces. – No smoking.

P280: Wear protective gloves, protective clothing, eye protection, face protection.

P261: Avoid breathing dust, fume, gas, mist, vapours, spray.

P272: Contaminated work clothing should not be allowed out of the workplace.

• Response : P302+P352: IF ON SKIN : Wash with plenty of soap and water.

P333+P313: If skin irritation or rash occurs : Get medical advice.

P363: Wash contaminated clothing before reuse.

P370+P378: In case of fire: Use for extinction.

• Disposal considerations : P501: Dispose of this material and its container to

hazardous or special waste collection point, in accordance with local, regional,

national and/or international regulation.

3.3. Other hazards

Other hazards : The substance does not fulfil the criteria to be identified

as PBT substance or vPvB substance according to Annex XIII of Regulation REACH. 

4.1. Description of first aid measures

Inhalation : Assure fresh air breathing. Allow the victim to rest.

Skin contact : Remove affected clothing and wash all exposed skin area with

mild soap and water, followed by warm water rinse. Get medical advice. Specific treatment

(see on this label). If skin irritation or rash occurs : Wash with plenty of soap and water.

Wash contaminated clothing before reuse. Eye contact : Rinse immediately with plenty of water.

Obtain medical attention if pain, blinking or redness persist.

Ingestion : Obtain emergency medical attention. Rinse mouth. Do NOT induce vomiting.

4.2. Most important symptoms and effects, both acute and delayed

Symptoms relating to use : May cause an allergic skin reaction.

4.3. Indication of any immediate medical attention and special treatment needed

General information : Never give anything by mouth to an unconscious person.

If you feel unwell, seek medical advice (show the label where possible). 

5.1. Extinguishing media

Suitable extinguishing media : Foam. Dry powder. Carbon dioxide. Water spray. Sand.

Unsuitable extinguishing media : Do not use a heavy water stream.

Surrounding fires : Use water spray or fog for cooling exposed containers.

5.2. Special hazards arising from the substance or mixture

Flammable class : Flammable solid. Hazardous combustion

products : Under fire conditions, hazardous fumes will be present.

5.3. Advice for fire-fighters Protection against fire : Do not enter fire area

without proper protective equipment, including respiratory protection.

Special procedures : Exercise caution when fighting any chemical fire.

Avoid (reject) fire-fighting water to enter environment. 

6.1. Personal precautions, protective equipment and emergency procedures

For emergency responders : Equip cleanup crew with proper protection. Ventilate area.

Technical measures : Use special care to avoid static electric charges. 

6.1. Personal precautions, protective equipment and emergency procedures

For emergency responders : Equip cleanup crew with proper protection.

Ventilate area. Technical measures : Use special care to avoid static electric charges. 

9.1. Information on basic physical and chemical properties

Physical state at 20 °C : Solid.

Odour threshold : No data available.

pH value : Not applicable.

Melting point [°C] : 280 °C

Decomposition point [°C] : N/A

Critical temperature [°C] : N/A

Auto-ignition temperature [°C] : 410 °C

Flammability (solid, gas) : Flammable solid.

Flash point [°C] : 250 °C

Boiling point [°C] : N/A

Initial boiling point [°C] : N/A

Final boiling point [°C] : N/A

Evaporation rate : N/A

Vapour pressure [20°C] : < 0.01

hPa at 20 °C

Vapour pressure mm/Hg : N/A

Vapour density : 4,9

Density [g/cm3] : 1,33

Relative density, gas (air=1) : N/A

Relative density, liquid (water=1) : N/A

Solubility in water [% weight] : Soluble in water

Solubility in water : N/A

Log Pow octanol / water at 20°C : No data available.

Solubility : N/A

Viscosity at 40°C [mm2/s] : N/A

9.2. Other information

Explosive properties : N/A

Explosion limits - upper [%] : N/A

Explosion limits - lower [%] : N/A

Oxidising properties : No data available. 

11.1. Information on toxicological effects Acute toxicity

• Inhalation : Based on available data, the classification criteria are not met.

• Dermal : Based on available data, the classification criteria are not met.

• Ingestion : Based on available data, the classification criteria are not met.

Corrosion : Based on available data, the classification criteria are not met.

Irritation : Based on available data, the classification criteria are not met.

Sensitization : May cause an allergic skin reaction. Mutagenicity : Based

on available data, the classification criteria are not met.

Carcinogenicity : Based on available data, the classification criteria are not met.

Toxic for reproduction : Based on available data, the classification criteria are not met.

STOT-single exposure : Based on available data, the classification criteria are not met.

STOT-repeated exposure : Based on available data, the classification criteria are not met.

Aspiration hazard : Based on available data, the classification criteria are not met. 

12.1. Toxicity

Toxicity information : Not established.

12.2. Persistence - degradability

Persistence - degradability : Biodegradable.

12.3. Bioaccumulative potential

Bioaccumulative potential : Not established.

12.4. Mobility in soil

Mobility in soil : Not established.

12.5. Results of PBT and vPvB assessment 

Results of PBT and vPvB assessment : The substance does

not fulfil the criteria to be identified as PBT substance or vPvB

substance according to Annex XIII of Regulation REACH.

12.6. Other adverse effects

Environmental precautions : Avoid release to the environment. 

13.1. Waste treatment methods

General : Avoid release to the environment. Dispose in a

safe manner in accordance with local/national regulations.

Dispose of this material and its container to hazardous or special

waste collection point, in accordance with local, regional, national

and/or international regulation. Special precautions : Handle empty

containers with care because residual vapours are flammable. 

15.1. Safety, health and environmental regulations/legislation specific

for the substance or mixture Safety, health and environmental : Ensure

all national/local regulations are observed. regulations/legislation specific

for the substance or mixture REACH Restrictions - Annex XVII : The components

of this product are not subject to restrictions. REACH Authorisation -

Annex XIV : The components of this product are not subject to authorization.

15.2. Chemical Safety Assessment

Chemical Safety Assessment : It has not been carried out. 

Abbreviations and acronyms : PBT: persistent, bioaccumulative and toxic. vPvB: very persistent and very bioaccumulative

Sources of key data used : REGULATION (EC) No 1272/2008 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 16

December 2008 on classification, labelling and packaging of substances and mixtures, amending and repealing Directives 67/548/EEC

and 1999/45/EC, and amending Regulation (EC) No 1907/2006 Further information : None. In accordance with REACH Regulation (CE)

Nº 1907/2006 and with CLP Regulation (CE) Nº 1272/2008 

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.