Hardness Buffer Powder
- Part number
- RXSOL-60-6235-100
- Category
- Lab Chemical
- Brand
- RXSOL
Overview
Hardness Indicator Powder
Applications
Water Hardness Test
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | RXSOL-60-6235-100 |
| Product Type | Hardness Buffer Powder |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
STOCK POINT ::: Mumbai, Kandla, Chennai, Kolkata, Visakhapatnam, Fujairah
| Phone | +91 22 27815541 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
| SARA 313 Component | CAS Number | Percent Comp. |
Dimension |
Exposure Limits |
| Boric Acid, Disodium Salt Pentahydrate | CAS# 12179-04-3 | 7-13% | W/W |
OSHA PEL 15 mg/mƒ (total dust) |
| Potassium Permanganate | CAS# 7722-64-7 |
3-7% |
W/W |
OSHA PEL (C)5 mg/mƒ (air) |
| Sodium Sulfide | CAS# 1313-82-2 | <2% | W/W |
TXDS: orl-rat LD•: 200 mg/Kg |
May be harmful if swallowed. May cause irritation. Avoid breathing vapors, or dusts. Use with adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash thoroughly after handling.
Emergency Overview: May cause irritation to the skin. May cause moderate irritation to the eyes. Dusts may cause irritation to the upper respiratory tract. DOT hazard is not applicable
Inhalation: Dusts may cause irritation to the upper respiratory tract.
Ingestion: May cause slight gastrointestinal irritation.
Skin: May cause slight irritation to the skin.
Eyes: May cause moderate irritation to the eyes.
Chronic Exposure:No Information Found.
Aggravated by Exposure:No Information Found.
Emergency Overview:May Cause Respiratory, Gastrointestinal, and Skin Irritation.
Severe Irritant to the Eyes.
Inhalation:Mists / Aerosols may Cause Irritation to Upper Respiratory Tract.
Ingestion:May Cause Gastrointestinal Irritation with Possible Nausea, Vomiting,
Abdominal Discomfort and Diarrhea.
Skin:Primary Route of Exposure; May Cause Moderate Irritation to the Skin.
Eye Contact:Severe Irritant to the Eyes, Possibly Corrosive.
Chronic Exposure:No Information Found.
Aggravated by Exposure:No Information Found.
May be harmful if swallowed. May cause irritation. Avoid breathing vapors, or dusts. Use with adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash thoroughly after handling.
|
SKIN: |
Wash exposed area with soap and water. If irritation persists, seek |
|
| EYES: |
Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. Seek Medical Aid. |
|
| INHALATION: |
Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen |
|
| INGESTION: | Give several glasses of milk or water. Vomiting may occur spontaneously, but DO NOT INDUCE! Never give anything by mouth to an unconscious person. |
|
Fire Extinguisher Type: |
Carbon Dioxide, dry chemical powder, or appropriate foam |
| Fire / Explosion Hazards: | None Known |
| Fire Fighting Procedure: |
Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and clothing. |
Sweep up and place in suitable (fiberboard) containers for reclamation or later disposal. Ventilate Area of Leak or Spill. Wear Appropriate Personal Protective Equipment as Specified in Section 8. Spills: Sweep up and Containerize for Reclamation or Disposal. Vacuuming or Wet Sweeping may be Used to Avoid Dust Dispersal. Wet Area may be Slippery. Spread Sand / Grit.
Store in a cool dry well ventilated area. Keep away from heat and flame. Do not get in eyes, on skin, or on clothing.
|
Respiratory Protection |
NIOSH/MSHA-approved respirator |
|
Ventilation |
Local |
| OTHER |
Mechanical |
| Protective Gloves | NWear appropriate gloves to prevent skin exposure |
| EYE PROTECTION | Chemical Safety Goggles |
| Other Protective Equipment |
Wear appropriate clothing to prevent skin exposure |
| BOILING POINT | Information not available |
| VAPOR PRESSURE | Information not available |
| MELTING POINT | Information not available |
| VAPOR DENSITY | Information not available |
| EVAPORATION RATE | <1.00 |
| Appearance /Odors | White powder slight sulfur odor |
| Flash Point | >200C |
| Specific Gravity | Information not available |
| Percent Volatile by | Information not available |
| Evaporation Standard | Ether =1 |
| Auto Ignition Temp |
Info not available |
| Lower Flamm. Limit in Air |
info not available |
| Upper Flamm. Limit in Air | info not available |
| Solubility in Water | Information not available |
|
STABILITY |
Stable |
|
CONDITIONS TO AVOID |
None known |
|
MATERIALS TO AVOID |
Strong oxidizing agents |
|
HAZARDOUS DECOMPOSITION PRODUCTS |
Thermal decomposition yields |
|
HAZARDOUS POLYMERIZATION |
Will Not Occur |
| Conditions to Avoid | None known |
Carcinogenic References: NTP Carcinogen - Known: No, IARC Category- None
Environmental Fate:No Information Found.
Environmental Toxicity:No Information Found.
Water Contaminated with this Product may be Sent to a Sanitary Sewer Treatment Facility, in Accordance with any Local Agreement, a Permitted Waster Treatmenst Facility or Discharged Under a Permit. Product as is - Incinerate or Land Dispose in an Approved Landfill.
DOT Classification: Not Regulated
DOT Regulations may change from time to time. Please consult the most recent D.O.T. regulations.
Components listed on TSCA Inventory.
eyes & skin:flush affected area with large amounts of water.inhal: remove to fresh air.ingest:give two large glasses of water. In all cases seek medical attention. Conditions aggravated/target organ.Persons with pre-existing eye,skin or respiratory condition may be
Flammability
Health Reactivity
|
Revisions |
NFPA |
| 7/30/2010 | 0.1 updated msds to 16 section from 10 section msds. STN |
| 0 |
The information herein is believed to be accurate and is offered in good faith for the user's consideration and investigation. No warranty either expressed or implied is made for the completeness or accuracy of the information whether originating from the above mentioned company or not. Users of this material should satisfy themselves by independent investigation of current scientific and medical knowledge that the material
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
Hardness Indicator Powder manufacturer, supplier and exporter. We are keeping ready stock of Hardness Indicator Powder in various size and packing at Mumbai, Kandla, Chennai, Visakhapatnam, Kolkata, Fujairah.
