RXSOL CHEMO PHARMA International Navi Mumbai, India

Products

7,061 products across 71 categories for marine, industrial, water treatment and laboratory use.

Browse all products Product catalogue

Lab Chemical

Hardness Buffer Solution

Part number
RXSOL-60-6188-250
Category
Lab Chemical
Brand
RXSOL
Hardness Buffer Solution

Safety and SDS

Read the safety data sheet before handling. Wear suitable gloves and eye protection.

View safety data sheet

  

Product Name RXSOL-60-6188-250
Product Type Hardness Buffer Solution

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Phone +91 22 27815540 / 41 / 42
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email rxsolchemicals@gmail.com
SARA 313           Component  CAS Number..................... Percent   Dimension
 
Exposure
Limits
 
Ammonium Chloride  CAS# 12125- 02-9   6.8%  W/V None
Established
 
Ammonium Hydroxide 28- 30% w/w  CAS# 1336-21-6  57.2% V/V None
Established
 
Water, Deionized ASTM Type II CAS# 7732- 18-5 36 % V/V None
  Established

 

May be harmful if swallowed. May cause irritation. Avoid breathing vapors, or dusts. Use with adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash thoroughly after handling.

Emergency Overview:Caution! May Cause Irritation to Skin and Eyes.

Inhalation:No Adverse Health Effects Expected from Inhalation.

Ingestion:Substance has Low Toxicity by Ingestion. Large Amounts May Cause Gastrointestinal Upset due to Osmotic Imbalance Caused by its ability to Sequester Metal Ions.

Skin:May Cause Irritation with Redness and Pain.

Eye Contact:May Cause Irritation, Redness and Pain.

Chronic Exposure:No Information Found.

Aggravated by Exposure:No Information Found. 

May be harmful if swallowed. May cause irritation. Avoid breathing vapors, or dusts.Use with adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash thoroughly after handling.

FIRST AID: SKIN: Remove contaminated clothing. Wash exposed area with soap and water. if irritation persists, seek medical attention.

EYES: Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. Seek Medical Aid. INHALATION: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen

INGESTION: Give several glasses of milk or water. Vomiting may occur

Fire Extinguisher Type

 Any means suitable for extinguishing surrounding fire
 

Fire / Explosion Hazards Thermal decomposition produces highly toxic fumes.
 
 Fire Fighting Procedure Wear self-contained breathing apparatus and protective
clothing to prevent contact with skin and clothing.

Absorb spill with inert material, then place in a chemical waste container. Neutralize with a weak acid.

Ventilate area of leak or spill. Keep unnecessary and unprotected people away from area of

Of spill. Wear appropriate personal protective equipment as specified in section 8. Contain and recover liquid when possible. Do not flush caustic residues to the sewer. Residues from spills can be diluted with water, neutralized with dilute acid such as acetic, hydrochloric Or sulfuric. Absorb neutralized caustic residue on clay, vermiculite or other inert substance and package in a suitable container for disposal. US Regulations (CERCLA) require reporting spills and releases to soil, water and air in excess of reportable quantities.

Store in a cool, dry, well-ventilated place away from incompatible materials. Wash thoroughly after handling.

     

Respiratory Protection

 NIOSH/MSHA-approved respirator
 

Ventilation
 
Local
 
OTHER Mechanical
 
Protective Gloves NIOSH Approved Gloves
 
EYE PROTECTION

Goggles and Face

Shield

 

Other Protective Equipment Wear appropriate clothing to prevent
skin exposure

      

BOILING POINT  Information not available
VAPOR PRESSURE   Information not available
 
MELTING POINT  Information not available
 
VAPOR DENSITY   Information  not available
 
EVAPORATION RATE Information not
available
Appearance /Odors

Clear liquid with ammonia
 

Flash Point Not applicable
 
Specific Gravity Information not available              
Percent Volatile by  >90
 
Evaporation Standard  
Auto Ignition Temp

Not applicable
 

Lower Flamm. Limit in Air Not applicable
Upper Flamm. Limit in Air  Not applicable
Solubility in Water Soluble

STABILITY

Stable

CONDITIONS TO AVOID

 Avoid contact with incompatible materials.
 

Materials to Avoid

Strong oxidizers, halogens, bleaches
 

Hazardous Decomposition Products:

Ammonia
 

Hazardous polymerization

Will Not Occur
 
Conditions to Avoid  None known

Carcinogenic References: IARC Category- None, NTP Carcinogen - Known: No

 This material is not expected to significantly bioaccumulate. 

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste facility. Although not a listed RCRA hazardous waste, this material may exhibit
one or more characteristics of a hazardous waste and require appropriate analysis to determine

specific disposal requirements. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements.

International (Water, IMO, IATA)
-----------------------------
Not Regulated

DOT Classification: UN2672, Ammonia Solution (with 10- 35% Ammonia), 8, PG III

DOT Regulations may change from time to time. Please consult the most recent D.O.T. regulations.

Chemical Inventory Status –
Part 1:Ingrdient
Ammonium Hydroxide (1336-21-6)
Ammonium Chloride (12125-02-9)
TSCA Yes Yes
EC Yes Yes
Japan No Yes
 Australia Yes Yes

Chemical Inventory Status –
Part 2:Ingredient
Ammonium Hydroxide (1336-21-6)
Ammonium Chloride (12125-02-9)
Korea Yes Yes
DSL Yes Yes
NDSL NO No
Phil. Yes Yes

Federal, State & International Regulations –
Part 1: Ingredient.
Ammonium Hydroxide (1336-21-6)
Ammonium Chloride (12125-02-9)
RQ NO No
TPQ NO NO
List NO No
Chemical Catg No No

Federal, State &
International Regulations –
Part 2:Ingredient
Ammonium Hydroxide (1336-21-6)
Ammonium Chloride (12125-02-9)
CERCLA 1000 5000
261.33 No No
8(d) No No

Chemical Weapons Convention:No
TSCA 12 (b):No
CDTA:NO 

Conditions aggravated/target organs: Corrosive! Harmful or fatal if inhaled or swallowed. Persons with preexisting skin, eye or respiratory disorders may be more susceptible. Acute: Extremely destructive to mucous membranes, upper respiratory tract, eyes and skin. May cause spasm, inflammation and edema of larynx and bronchi, pneumonitis and pulmonary edema. Chronic: Damage to


                                                Flammability
Health                                                                                              Reactivity

Revisions
 
NFPA
 
7/29/2010

0.1    updated msds to 16 section from 10
          section msds. STN
 

5/9/2011  0.2   updated showing sec 14 info

The information herein is believed to be accurate and is offered in good faith for the user's consideration and investigation. No warranty either expressed or implied is made for the completeness or accuracy of the information whether originating from the above mentioned company or not. Users of this material should satisfy themselves by independent investigation of current scientific and medical knowledge that the material

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Request the signed SDS as PDF

Availability

Hardness Buffer Solution manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Hardness Buffer Solution at a competitive price from us. We have ready stock of Hardness Buffer Solution in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Our stock points and branches