RXSOL CHEMO PHARMA International Navi Mumbai, India

Products

7,082 products across 97 categories for marine, industrial, water treatment and laboratory use.

Browse all products Product catalogue

Tank Cleaner

Hydrocarbon Remover HCF

For removal of traces HYDROCARBONS from tank, After cleaning of TANKS from solvent base tank cleaning materials . when possibilities of next cargo will contaminate with hydrocarbon.
Part number
RXSOL-20-2008-210
Category
Tank Cleaner
Brand
RXSOL
Hydrocarbon Remover HCF

Overview

Hydrocarbon Remover HCF This product is very common to use for removing of  traces  HYDROCARBONS from tank,  After cleaning of TANKS from solvent base tank cleaning materials hydrocarbon may still be left on tank surfaces. with Hydrocarbon Remover HCF is very effective to remove animal and vegetable oils, petroleum products residues from tank surface.

For removal of traces  HYDROCARBONS from tank,  After cleaning of TANKS from solvent base tank cleaning materials . when possibilities of next cargo will contaminate with hydrocarbon.

Technical specifications

Specifications of Hydrocarbon Remover HCF
Appearance Physical Status (20°C)Liquid
ColorClear colorless
OdourSoft
pH (in %1 solution )7.0-8
Density1.00-1.10 gram / cm3
Solubility in WaterCompletely

Applications

Neutral HCF supplier and stockist at all Indian and UAE - Middle East Coastal. HCF Neutral chemical importance is to emulsify vegetable oils and animal oils and fats residue with less foaming effect. Chemically if you can understand oil and fat which contain FATTY ACID while the general cleaner is alkaline in nature which is resulting greasy mass oncoming contact with Fatty Acid and Alkali cleaning material. To avoid the formation of GREASE like substance inside the tank, it is very important to take care of an alkaline cleaner with such cargo. On the other hand HCF Neutral ( free from any kinds of alkali mixture ) emulsifying oils particle and makes water soluble to remove from zinc-silicate coated tanks surface.

Question : How to clean veg oil ? 

Answer   : Following step can be follows to clean VEG OIL...
Step 1
Don't expose empty tank in air. Try to keep cool temperature inside the tank. Remove any remaining oil residue by gravitational and manual stripping, If possible Dampen a soft, clean cloth or rag under cool to room temperature water. Wring the cloth. The cloth should be damp, not dripping wet.
Step 2
If posible Lay the dampened cloth over the vegetable oil. Push downward to absorb as much oil as possible. Do not rub or wipe the oil. Lift the cloth.
Step 3
Spray and Sprinkle Hydrocarbon Remover HCF over any remaining vegetable oil. HCF cleaner will emulsify the oil, Allow the product to complete reaction for approximately an hour. 
Step 4

Then follow genreal tank cleaning manual of SHIP. Common addopted method for tank cleaning is as follows :::

Spraying Method:-
Using HCF as delivered in drums, spray onto areas where residue remains following rough washing leave for 10-45 minutes (but do not allow to dry), then butterworth at maximum pressure and warm water 60oC for at least 3 hours, checking that there is no foam remaining in the final stages.  Inspects tanks(s) and if desired result has been achieved fresh water rinse and dry.
**Make sure to take all safety precautions are followed when handling / spraying HCF**
                  
Re-circulation Method:–
Fill tank with fresh water and heat up to warm 50oC .  IF a drop line is available on the tank line system, then start to circulate the water and add the required amount of Caustic flakes and HCF to make a 2.5% solution.  A stronger solution can be made, but be advised that too much Caustic and too high temperature will result in white powder all over the tank.  Under normal circumstances, between 2.5% and 4.5% will be sufficient strength.  If there is no drop line, then lower butterworth hoses into the tank from the pump stack header without machines attached and circulate through these hoses while you fill the solution material. 
                                             * Use a strainer at the pump stack when circulating any solution.*
Step 5
Once clean, use a dry, clean towel or rag to dry the area. Or keep tanks ventelated.

Dosage and directions

APPLICATION, FEATURES & BENEFITS
Completely miscible with sea water and fresh water.
Suitable for use on zinc-silicate coatings and most common metals.

Note : Limited application on epoxy coatings. The maximum concentration is 10% and a maximum temperature of 60°C.

Characteristics and notes

Usage Area : Oil and hydrocarbon remover at aluminum and zinc-silicate coated tanks.

NEUTRAL HCF REMOVER HYDROCARBON CLEANER in Sikka, Mundra, Kolkata, Vizag, Mumbai

Safety and SDS

Read the safety data sheet before handling. Wear suitable gloves and eye protection.

View safety data sheet

Product Name : RXSOL-20-2008-210
Product Type : HCF REMOVER

 Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Stock Point : Mumbai, Kandla, Kolkata, Chennai, Vizag, Fujairah, Muscat, Nairobi

Phone : +91 22 65113333 / 5555 / 9999 / 27611360
Fax : +91 22 2781 1318 :::AOH :0091 9821214367
Email : rxsolchemicals@gmail.com

Chemical characterization

Description

Mixture of substances listed below with nonhazardous additions. Cleansing agent

Components ( Other then Soft Raw Base )

Non-Ionic surfactants Xn, Xi; R 22-41 10-25 % CAS: 111-76-2

Einecs

203-905-0 2-Butoxyethanol Xn, Xi; R 20/21/22-36/38 2.5-10%

*See Section 16

Hazard description

Xn Harmful

Information concerning Particular hazards for human and environment

The product has to be  abeled due to the calculation procedure of the “General Classification guideline for preparations of the EU” in the latest valid version. R 22 Harmful if swallowed.

Classification system

The classification is according to the latest editions of the EU-lists, and extended by company and literature data.

General information

Immediately remove any clothing soiled by the product. Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.

After inhalation

Supply fresh air; consult doctor in case of complaints.

After skin contact

Generally the product does not irritate the skin.

After eye contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

After swallowing

Call for a doctor immediately

Suitable extinguishing agents

CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.

Protective equipment

No special measures required.

Person-related safety precautions

Wear protective clothing.

Measures for environmental protection

Dilute with plenty of water.

Do not allow to enter sewers/ surface or ground water.

Measures for cleaning/collecting

Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).

Dispose contaminated material as waste according to item 13.

Ensure adequate ventilation.

Dispose of the material collected according to regulations.

Handling

Information for safe handling

Store in cool, dry place in tightly closed receptacles.
Prevent formation of aerosols.

Information about fire- and explosion protection

No special measures required.

Storage

Requirements to be met by storerooms and receptacles

No special requirements.

Information about storage in one common storage facility

Not required.

Further information about storage conditions

None.

Additional information about design of technical facilities: No further data; see item 7.
• Ingredients with limit values that require monitoring at the workplace:
111-76-2 2-butoxyethanol
WEL                          Short-term value: 50 ppm
                                   Long-term value: 25 ppm

• Additional information: The lists valid during the making were used as basis.
• Personal protective equipment:
• General protective and hygienic measures: Keep away from foodstuffs, beverages and feed.
• Respiratory protection: Not required.
• Protection of hands: Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
• Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.
• Penetration time of glove material
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
• Eye protection: Safety glasses
• Body protection: Protective work clothing

 

• General Information
Form: Fluid
Colour: Yellowise / Clear
Odour: Characteristic
• Change in condition
Melting point/Melting range: Undetermined.
Boiling point/Boiling range: 171°C
• Ignition temperature: 240°C
• Self-igniting: Product is not selfigniting.
• Danger of explosion: Product does not present an explosion hazard.
• Explosion limits:
Lower: 1.1 Vol %
Upper: 10.6 Vol %
• Vapour pressure at 20°C: 23 hPa
• Density at 20°C: 1.01 g/cm³
• Solubility in / Miscibility with
water: Fully miscible.
• pH-value at 20°C: > 7

Thermal decomposition / conditions to be avoided No decomposition if used according to specifications.-
Dangerous reactions No dangerous reactions known.
Dangerous decomposition products Carbon monoxide and carbon dioxide.

Acute toxicity Primary irritant effect:
on the skin No irritant effect.
on the eye No irritating effect.
Sensitization No sensitizing effects known.
Additional toxicological information The product shows the following dangers according to the calculation method of the General EU
Classification Guidelines for Preparations as issued in the latest version Harmful

General notes Water hazard class 2 (German Regulation) (Self-assessment): hazardous for water Do not allow product to reach ground water, water course or sewage system. Danger to drinking water if even small quantities leak into the ground.

Product Recommendation Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Uncleaned packaging Recommendation Disposal must be made according to official regulations.
Recommended cleansing agents Water, if necessary together with cleansing agents.

 

• Land transport ADR/RID (cross-border)
• ADR/RID class: -
• Maritime transport IMDG:
• IMDG Class: -
• Marine pollutant: No
• Air transport ICAO-TI and IATA-DGR:
• ICAO/IATA Class: -

Labelling according to EU guidelines The product has been classified and marked in accordance with EU Directives / Ordinance on Hazardous Materials.
Code letter and hazard designation of product Xn Harmful
Risk phrases 22 Harmful if swallowed.
Safety phrases 23 Do not breathe gas/fumes/vapour/spray (appropriate wording to be specified by the manufacturer).
26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
36/37/39 Wear suitable protective clothing, gloves and eye/face protection.
60 This material and its container must be disposed of as hazardous waste.
National regulations
Waterhazard class Water hazard class 2 (Self-assessment): hazardous for water.

 This information is based on our present knowledge. However, this shall not constitute a guarantee for any
specific product features and shall not establish a legally valid contractual relationship.
• Relevant R-phrases
20/21/22 Harmful by inhalation, in contact with skin and if swallowed.
22 Harmful if swallowed.
36/38 Irritating to eyes and skin.
41 Risk of serious damage to eyes.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Request the signed SDS as PDF

Availability

Hydrocarbon Remover Hcf supplier in UAE Middle East Oman India. Hydrocarbon Remover Hcf largest stockist distributor and supplier in Mumbai Kandla Gandhidham Mundra, Kolkata Haldia, Chennai Ennore, Visakhapatnam Gangavaram, Paradip, FUjairah Dubai Jerf Ajman, Abudhabi, Sharjah, BARKA RUWI Muscat Sohar Barka Oman, Nairobi Mombasa Kenya Africa

Our stock points and branches