INK UV Stain Remover
- Part number
- RXSOL-15-3012-001
- Category
- House / HOTEL & CATERING
- Brand
- RXSOL
Overview
REMOVING INK UV STAIN ::: very effective to remove Strong ink stain due to its dissolving power, Also very usefull for removal of vinyl graphics from boats, signs, trucks, and glass, Cleans and removes adhesive caulking and bedding compounds, Cleans glue residues, resin, and hardener.
Technical specifications
|||
| Good for emulsification of Oils , Gum , Wax, Greases , Polymer & Solvents , TETRA CHLOROETHYLENE ( PC ) | |
| In g/cm3 at 15°C | 89 |
|---|---|
| (PMCC)°C | Above 63 |
Applications
Fully active cleaner specially formulated for the removal of INK & tuff oily stains residues. “RXSOL-15-3012” should always be used at full strength to obtain maximum benefits.
RXSOL-15-3012 is a unique formulation of powerful surfactants and organic solvents. It does not contain any chlorinated solvents of Phenols.
Trick :: Before application with a moist cleaning cloth and dissolve with one move ink and paper dust from the blanket. Then rub with a moist cloth until the blanket is clean. But if it leaves a residue, wait for the piece to cool and try removing it with some RXSOL-15-3012 on a soft paper towel or cotton ball. Any residue remaining after using RXSOL-15-3012 should be removed with RXSOL Multi-Surface Cleaner with Vinegar.
Dosage and directions
Cleaning time will vary depending on the extract nature and thickness of deposit to be removal. Stubborn deposits should be scrubbed to assist the cleaning operation.
Automatic systems : Follow the program instructions.
Manual use : Blankets Apply with a moist cleaning cloth and dissolve with one move ink and paper dust from the blanket. Then rub with a moist cloth until the blanket is clean.
Ink roller : Apply undiluted or mixed with water on the roller, set the doctor blade.
Characteristics and notes
Characteristics:-
- Unique chemical formulation.
- Non- toxic.
- Extends time between cleans.
- Safe to handle.
- Effective removal for Strong ink dissolving power/CARBON DEPOSITS.
- Can be applied by all normal methods.
- Formulated to be very cost effective.
- Does not contain chlorinated hydrocarbons Free of naphtenes, aromatic
- Can be used on all metals & most painted surfaces.
- Environmentally friendly.
- Non-Corrosive.
- 100% Active.
- Dries Completely.
- Does not require special feeding equipment for safe application.
- Reduce downtime and maintenance costs.
-
Features and benefits
Slow evaporation, high flash point
Sales to use and low environmental impact.
Limited fire risk.
Economical in use.
Safer and lower environmental impact.
Fast acting less downtime.
Economical in use.
Emulsifies with water
Cleans away both ink and paper dust.
Leaves no residues on the blanket after cleaning with water.
Very low odour
Pleasant working environment.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name |
INK UV Stain Remover |
| Product Type | RXSOL-15-3012-001 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
BRANCH STOCK POINT : Mumbai, Kandla, Chennai, Visakhapatnam, Chennai, Kolkata, Fujairah, Muscat
| Phone | +91 27815541 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9322594669 |
| rxsolchemicals@gmail.com |
PRINCIPLE HAZARDOUS INGREDIENTS: OSHA PEL
Glycol Ether DB (CAS 112-34-5) N/A
Acetone (CAS 67-64-1) 1000 p.p.m.
Isopropyl Alcohol (CAS 67-63-0) 400 p.p.m.
Orange Oil (CAS 5989-27-5) N/A
Route(s) of entry Eyes: yes Skin: Yes Inhalation: Yes Ingestion: Yes
Health Hazards: Eyes – May cause irritation.
Skin – May cause irritation.
Inhalation – Excessive exposure may cause respiratory irritation
Ingestion – Large amounts may be harmful
Carcinogenicity: NTP: Known – No; Anticipated – No OSHA: TLVA4 for Acetone & Isopropyl Alcohol IARC: No
Eyes: Flush thoroughly with water for 15 minutes. Get medical attention.
Skin : Flush thoroughly with water for 15 minutes. Get medical attention.
Inhalation: Move to fresh air. Get medical attention if irritation occurs.
Ingestion:Do not induce al vomit unless directed to do so by medical personnel. Get medical attention if irritation occurs.
Flash Point: 75 ° C (Degree C)
Boiling Point: 178 ° F
Extinguishing Media: Use water, carbon dioxide, dry powder or other media appropriate for materials actually involved in fire.
Special Fire Fighting Procedures: In the event of a fire, wear full protective clothing and NIOSH-approved, self-contained breathing apparatus with full facepiece operated in the pressure demand or other positive pressure mode.
Unusual Fire and Explosion Hazards: None
Water misoible
Manual use and automatic washing systems
Suited for use on EPDM rubber
Suited for UV and flexo links
Colourless
SMALL SPILL: Absorb liquid on inert material such as vermiculite, and dry sand.
LARGE SPILL: Persons not wearing protective equipment should be excluded from area of spill until clean-up has been completed. Stop spill at source, contain area of spill to prevent spreading, pump liquid to salvage tank. Remaining liquid may be absorbed with inert material such as dry sand, vermiculite, and shoveled into containers. Prevent run-off to sewers, streams, or other bodies of water. If run-off occurs, notify the proper authorities as required that a spill has occurred.
Store out of reach of children. Keep container tightly closed as acetone tends to volatize out of even sealed bottles over time. . Store in a cool, dry location. Avoid freezing or extended storage in high temperatures.
Airborne Exposure Limits: None established.
Ventilation System: Room ventilation is normally satisfactory. Mechanical assist may be required when vapors or mist are generated.
Personal Respirators: For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH approved) may be worn.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles.
| Odor : | Clear |
| Physical State: | Liquid. |
| Appearance: | Clear |
| pH : | N/A |
| Specific Gravity: | 0.912 g/mL |
|
Boiling Point: |
182 ° F |
| Flash Point: | 75 ° C (Degree C) |
| Freezing/Melting Point: | N/E |
| Vapor Pressure: | N/E |
| Vapor Density: | N/E |
|
Solubility in Water: |
Miscible |
Stability: Stable under ordinary conditions of use and storage.
Hazardous Decomposition or Byproducts: Exposure to fire may liberate carbon dioxide, carbon monoxide, and other unidentified thermal decomposition products from this product or its packaging.
Hazardous Polymerization: Will not occur.
Incompatibilities: Acid materials and strong oxidizing materials.
Conditions to Avoid: None known
Acetone - Oral Rat LD50: 5800 mg.kg. Inhalation Rat LC50: 100 mg/m3, irritation eye rabbit,
standard draize, 20 mg severe; investigated as a tumorigen, mutagen, reproductive effector.
Glycol Ether DB -Oral Rat LD50: 7,292 mg/kg Dermal Rabbit LD-50: 2,764 mg/kg
Skin Irritation (rabbit) slight Eye Irritation (rabbit) moderate
Environmental Fate: .Acetone readily biodegrades.
Environmental Toxicity: Acetone not toxic to fish. Glycol Ether DB Acute Aquatic
Effects Data: 24 h LC-50 (goldfish): 2700 mg/L 96 h LC-50 (bluegill sunfish): 1300 mg/L
Do not dispose of on the land, in surface waters, sewers or in storm drains. Larger quantities should be collected for reuse or consigned to a licensed hazardous waste hauler for disposal in accordance with federal, state and local regulations. All disposal must be in accordance with all federal, state and local regulations.
Ground Transportation: Limited quantity exception applies for each box containing 12 pints. Requires a limited quantity label.
Air Transportation: With a vented seal/cap, this item cannot be shipped via air in accordance with CFR 49 173-24(g).
Maritime Transportation: UN1993; Flammable Liquid, N.O.S., (Acetone); 3: II.
Check regulation for limited quantity exceptions.
Acetone (CAS # 67-64-1) CERCLA, SARA 313
Glycol Ether DB (CAS # 111-76-2) SARA 313
Isopropanol (CAS #67-63-0 <2%) MASS, NJHS, NRC, OSHAWAC, PA, SARA 313,
TXAIR, WHMIS 1%
All components are listed on TSCA
CERCLA = Comprehensive Environmental Response, Compensation, and Liability Act
MASS = Massachusetts Hazardous Substance List
NJHS = New Jersey Right-to-Know Hazardous Substances
NRC = Nationally Recognized Carcinogens
OSHA WAC = OSHA Workplace Contaminants
PA = PA Right-to-Know List of Hazardous Substances
SARA 313 = SARA 313 Title III Toxic Chemicals
TXAIR = Texas Air Contaminants with Health Effects Screening Level
WHMIS = Workforce Hazardous Material Information System
This product has no established regulatory information. All regulatory information given is based on individual components of the mixture by component number. While this information and recommendations set forth herein are believed to be accurate and reliable, it is provided without warranty regarding its accuracy.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
INK UV Stain Remover manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of INK UV Stain Remover at a competitive price from us. We have ready stock of INK UV Stain Remover in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.