ISO PROPYL MYRISTATE
- Part number
- RXSOL-19-6604-050
- Category
- Hand Wash / Personal care
- Brand
- RXSOL
Overview
Isopropyl Myristate (IPM) is the ester of isopropyl alcohol and myristic acid. IPM serves as an emollient, moisturizer or thickening agent in the personal care and cosmetics industry, specifically in creams and lotions. ... Additionally, its moisturizing and thickening properties make it suitable for topical medicinal preparations in pharmaceuticals
Applications
Isopropyl Myristate is used in cosmetic.
Isopropyl Myristate also used as a treatment for HAIR LICE
Isopropyl Myristate also in flea and tick killing products for pets.
Isopropyl Myristate used to remove bacteria from the oral cavity.
Isopropyl myristate is also used as a solvent in perfume materials.
Dosage and directions
IUPAC name of Isopropyl Myristate : Propan-2-yl tetradecanoate
Isopropyl myristate is produced by distillation, which is preceded by the esterification of myristic acid and isopropanol, alkali refined to neutralize the catalyst.
Isopropyl myristate is a moisturizer with polar characteristics used in cosmetics and topical medical preparations to ameliorate the skin absorption. Isopropyl myristate has been largely studied and impulsed as a skin penetration enhancer. ... Isopropyl tetradecanoate is a fatty acid ester.
Characteristics and notes
Isopropyl myristate is found in several everyday beauty products and is generally considered safe for consumer use. Despite its popularity with manufacturers, some side effects have been reported.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Porduct Name | ISO PROPYL MYRISTATE |
| Part Number | RXSOL-19-6604-050 |
Company Details:....
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA
| Phone | +91 22 20871200 - 1400 |
| Fax | +91 22 27612100 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com | |
| Website | www.rxmraine.com |
Substances
| Synonyms |
Myristic acid isopropyl ester
Isopropyl tetradecanoate |
| Formula | C17H34O2 |
| Molecular weight | 270,45 g/mol |
| CAS-No. | 110-27-0 |
| EC-No | 203-751-4 |
No components need to be disclosed according to the applicable regulations.
| Classification of the substance or mixture | Not a hazardous substance or mixture according to Regulation (EC) No 1272/2008 |
| Label elements | Not a hazardous substance or mixture according to Regulation (EC) No 1272/2008. |
| Other hazards | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
Description of first aid measures
| If inhaled | After inhalation: fresh air |
| In case of skin contact | In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower. |
| In case of eye contact | After eye contact: rinse out with plenty of water. Remove contact lenses. |
| If swallowed | After swallowing: make victim drink water (two glasses at most). Consult doctor if feeling unwell. |
| Most important symptoms and effects, both acute and delayed | The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 |
| Indication of any immediate medical attention and special treatment needed | No data available |
Extinguishing media
| Suitable extinguishing media | Carbon dioxide (CO2) Foam Dry powder |
| Unsuitable extinguishing media | For this substance/mixture no limitations of extinguishing agents are given. |
| Special hazards arising from the substance or mixture |
Highly flammable liquid and vapor. Runoff to sewer may create fire or explosion hazard.
In a fire or if heated, a pressure increase will occur and the container may burst, with the
risk of a subsequent explosion. The vapor/gas is heavier than air and will spread along
the ground. Vapors may accumulate in low or confined areas or travel a considerable
distance to a source of ignition and flash back.
Highly flammable liquid and vapor. Runoff to sewer may create fire or explosion hazard.
In a fire or if heated, a pressure increase will occur and the container may burst, with the
risk of a subsequent explosion. The vapor/gas is heavier than air and will spread along
the ground. Vapors may accumulate in low or confined areas or travel a considerable
distance to a source of ignition and flash back.
Highly flammable liquid and vapor. Runoff to sewer may create fire or explosion hazard.
In a fire or if heated, a pressure increase will occur and the container may burst, with the
risk of a subsequent explosion. The vapor/gas is heavier than air and will spread along
the ground. Vapors may accumulate in low or confined areas or travel a considerable
distance to a source of ignition and flash back.
Carbon oxides
Combustible.
Vapors are heavier than air and may spread along floors.
Forms explosive mixtures with air on intense heating.
Development of hazardous combustion gases or vapours possible in the event of fire.
|
| Advice for firefighters |
In the event of fire, wear self-contained breathing apparatus. |
| Further information |
None
spray to keep fire-exposed containers cool.Promptly isolate the scene by removing all persons from the vicinity of the incident if
there is a fire. No action shall be taken involving any personal risk or without suitable
training. Move containers from fire area if this can be done without risk. Use water
spray to keep fire-exposed containers cool.
|
| Personal precautions, protective equipment and emergency procedures | Advice for non-emergency personnel: Do not breathe vapors, aerosols. Evacuate the danger area, observe emergency procedures, consult an expert. For personal protection see section 8. |
| Environmental precautions | Do not let product enter drains. |
| Methods and materials for containment and cleaning up |
Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions
(see sections 7 and 10). Take up with liquid-absorbent material (e.g. Chemizorb® ).
Dispose of properly. Clean up affected area.
|
| Reference to other sections | For disposal see section 13. |
| Precautions for safe handling | For precautions see section 2.2. |
|
Conditions for safe storage, including any incompatibilities Storage conditions |
Tightly closed. |
| Storage class | Storage class (TRGS 510): 10: Combustible liquids |
| Specific end use(s) | Apart from the uses mentioned in section 1.2 no other specific uses are stipulated |
Control parameters
Ingredients with workplace control parameters
Exposure controls
Personal protective equipment
| Eye/face protection | Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses |
| Skin protection |
This recommendation applies only to the product stated in the safety data sheet,
supplied by us and for the designated use. When dissolving in or mixing with other
substances and under conditions deviating from those stated in EN374 please
contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell,
Internet: www.kcl.de).
Full contact
Material: Nitrile rubber
Minimum layer thickness: 0,4 mm
Break through time: 480 min
Material tested:Camatril® (KCL 730 / Aldrich Z677442, Size M)
This recommendation applies only to the product stated in the safety data sheet,
supplied by us and for the designated use. When dissolving in or mixing with other
substances and under conditions deviating from those stated in EN374 please
contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell,
Internet: www.kcl.de).
Splash contact
Material: Chloroprene
Minimum layer thickness: 0,65 mm
Break through time: 30 min
Material tested:KCL 720 Camapren®
|
| Respiratory protection | Not required; except in case of aerosol formation. |
| Control of environmental exposure | Do not let product enter drains. |
| Physical state | liquid |
| Colour | No data available |
| Odor | No data available |
| Melting point/freezing point | Melting point/range: 3 °C - lit. |
| Initial boiling point and boiling range | 193 °C at 27 hPa - lit. |
| Flammability (solid, gas) | No data available |
| Upper/lower flammability or explosive limits | No data available |
| Flash point | > 150 °C - open cup |
| Autoignition temperature | No data available |
| Decomposition temperature | No data available |
| pH |
No data available
materials.Extremely flammable in the presence of the following materials or conditions: oxidizing
materials.
|
| Viscosity |
Viscosity, kinematic: No data available
Viscosity, dynamic: No data available
|
| Water solubility | No data available |
| Partition coefficient: n-octanol/water | No data available |
| Vapor pressure | No data available |
| Density | 0,85 g/cm3 at 25 °C - lit. |
| Relative density | No data available |
| Relative vapor density | No data available |
| Particle characteristics | No data available |
| Explosive properties | No data available |
| Oxidizing properties | None. |
| Reactivity |
Forms explosive mixtures with air on intense heating.
A range from approx. 15 Kelvin below the flash point is to be rated as critical.
|
| Chemical stability | The product is chemically stable under standard ambient conditions (room temperature) . |
| Possibility of hazardous reactions |
Violent reactions possible with:
Oxidizing agents
|
| Conditions to avoid | Strong heating. |
| Incompatible materials |
No data available
|
| Hazardous decomposition products | In the event of fire: see section 5 |
Information on toxicological effects
| Acute toxicity |
LD50 Oral - Rat - > 10.000 mg/kg
Remarks: (IUCLID)
Inhalation: No data available
LD50 Dermal - Rabbit - > 5.000 mg/kg
Remarks: (IUCLID) |
| Skin corrosion/irritation |
Skin - Rabbit
Result: slight irritation
(OECD Test Guideline 404). |
| Serious eye damage/eye irritation |
Eyes - Rabbit
Result: slight irritation
(OECD Test Guideline 405)
|
| Respiratory or skin sensitization |
Patch test: - Human
Result: negative
Remarks: (IUCLID)
Sensitisation test (Magnusson and Kligman):
Result: negative
Remarks: (IUCLID)
|
| Germ cell mutagenicity |
Test Type: Ames test
Result: negative
Remarks: (IUCLID)
|
| Carcinogenicity |
No data available
|
| Reproductive toxicity | No data available |
| Specific target organ toxicity - single exposure | No data available |
| Specific target organ toxicity - repeated exposure | No data available |
| Aspiration hazard | No data available |
| Toxicity | |
| Toxicity to fish |
LC50 - Danio rerio (zebra fish) - 8.400 mg/l - 96 h
Remarks: (IUCLID)
|
| Toxicity to daphnia and other aquatic invertebrates |
EC50 - Daphnia magna (Water flea) - > 100 mg/l - 48 h
(OECD Test Guideline 202)
|
| Toxicity to algae |
IC50 - Desmodesmus subspicatus (green algae) - > 100 mg/l - 72 h
(OECD Test Guideline 201)
|
| Toxicity to bacteria |
EC0 - Pseudomonas putida - > 10.000 mg/l - 30 min
(OECD Test Guideline 209)
|
|
Persistence and degradability Biodegradability |
Result: 63 - 91 % - Readily biodegradable.
(OECD Test Guideline 301D)
Remarks: (IUCLID)
|
| Bioaccumulative potential | No data available |
| Mobility in soil | No data available |
| Results of PBT and vPvB assessment | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
|
Endocrine disrupting properties Product |
|
| Assessment | The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. |
| Other adverse effects | No ecological problems are to be expected when the product is handled and used with due care and attention. |
| Waste treatment methods | No data available |
| UN number | ADR/RID: IMDG: IATA: |
| UN proper shipping name |
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods |
| Transport hazard class(es) | ADR/RID: IMDG: IATA: |
| Packaging group | ADR/RID: IMDG: IATA: |
| Environmental hazards | ADR/RID: no IMDG Marine pollutant: no IATA: no |
| Special precautions for user | |
| Further information | Not classified as dangerous in the meaning of transport regulations.. |
| Safety, health and environmental regulations/legislation specific for the substance or mixture | This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006. |
| Chemical Safety Assessment | For this product a chemical safety assessment was not carried out |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and weassume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |
