Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | Iron Buffer Solution |
| Product Type | RXSOL-60-6272-500 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
| SARA 313 Component | CAS Number | Percent Comp. |
Dimension |
Exposure Limits |
| Sodium Acetate | CAS# 6131-90-4 |
45 - 55% |
w/V | None Established |
| Water, Deionized ASTM Type II | CAS# 7732-18-5 | Balance | V/V | None Established |
May be harmful if swallowed. May cause irritation. Avoid breathing vapors, or dusts. Use with adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash thoroughly after handling.
Emergency Overview: Caution! May Cause Irritation To Skin, Eyes, And Respiratory Tract.
Inhalation: Irritates the Respiratory Tract. May Produce Sore Throat, Coughing and Labored Breathing.
Ingestion: Large Doses may Produce Abdominal Pain, Nausea, and Vomiting.
Skin: May Cause Irritation with Redness and Pain.
Eye Contact: May Cause Irritation, Redness, Pain, or Blurred Vision
Chronic Exposure: No Information Found.
Aggravated by Exposure: Persons with Pre-Existing Skin Disorders or Impaired Respiratory Function may be More Susceptible to the Effects of the Substance.
May be harmful if swallowed. May cause irritation. Avoid breathing vapors, or dusts.Use with adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash thoroughly after handling.
|
SKIN: |
Remove contaminated clothing. Wash exposed area with soap and water. if irritation persists, seek medical attention. |
| EYES: | Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally.Seek Medical Aid. |
| INHALATION: | Remove to fresh air. If not breathing, give artificialIron respiration. If breathing is difficult, give oxygen If swallowed give large quantities of water and get medical attention immediately. |
|
Fire Extinguisher Type: |
|
| Fire / Explosion Hazards: | May pose a fire hazard when exposed to elevated temperature ro contact with ignition source. |
| Fire Fighting Procedure: | Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and clothing. |
Remove all sources of ignition. Absorb spill with inert material, then place in a chemical waste container.Dispose of in a manner consistent with federal, local law.
Ventilate area or Leak or Spill. Remove all Sources of Ignition.Wear Appropriate Personal Protective Equipment as Specified in Section 8.
Isolate Hazard Area. Keep Unnecessary and Unprotected Personnel from Entering. Contain and Recover Liquid when Possible. Absorb with an Inert Material (e.g. Vermiculite, Dry Sand, Earth), and Place in a Chemical Waste Container. Do Not Use Combustible Materials,.such as Saw Dust. Do not Flush to Sewer!
Store in a cool, dry, well-ventilated place away from incompatible materials. Wash thoroughly after
handling. Keep out of direct sunlight and away from heat, water and incompatible materials. Do not reuse
|
Respiratory Protection |
None required |
|
Ventilation |
Local |
| OTHER |
Mechanical |
| Protective Gloves | Wear appropriate gloves to prevent skin exposure |
| EYE PROTECTION | Splash Goggles |
| Other Protective Equipment | Use safe laboratory handling procedures. |
| BOILING POINT | information not available |
| VAPOR PRESSURE | not available |
| MELTING POINT | information not available |
| VAPOR DENSITY | not available |
| EVAPORATION RATE |
information not available |
| Appearance /Odors | Clear liquid,odorless |
| Flash Point |
Not applicable |
| Specific Gravity | ~1.2 |
| Percent Volatile by | ~50 |
| Evaporation Standard | |
| Auto Ignition Temp |
Not applicable |
| Lower Flamm. Limit in Air | Not applicable |
| Upper Flamm. Limit in Air | Not applicable |
| Solubility in Water | Soluble |
|
STABILITY |
Stable |
|
CONDITIONS TO AVOID |
None known |
|
MATERIALS TO AVOID |
None known |
|
HAZARDOUS DECOMPOSITION PRODUCTS |
Oxides of carbon and sodium |
|
HAZARDOUS POLYMERIZATION |
will not occur |
| Conditions to Avoid | None known |
Carcinogenic References: NTP Carcinogen - Known: No, IARC Category - None
Environmental Fate: No Information Found.
Environmental Toxicity: Freshwater Fish Species Data: 24 Hr LC50 Lepomis macrochirus: 5000 mg/L Microtox Data: 18 Hr EC50 Pseudomonas Putida: 7200 mg/L Water Flea Data: 48 Hr ED50 water flea: 5800 mg/L.
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. States and local disposal regulations may differ from federal, state and local requirements
DOT Classification: Not Regulated
DOT Regulations may change from time to time. Please consult the most recent D.O.T. regulations.
Chemical Inventory Status –
Part 1:Ingrdient
Sodium Acetate (127-09-03)
TSCA Yes
EC Yes
Japan YES
Australia Yes
Chemical Inventory Status –
Part 2:Ingredient
Page 3 of 5 Sodium Acetate ( 127-09-03)
Korea Yes
DSL Yes
NDSL No
Phil. Yes
Federal, State & International Regulations –
Part 1: Ingredient.
Sodium Acetate (127-09-03)
RQ No
TPQ No
List No
Chemical Catg No
Federal, State &
International Regulations –
Part 2:Ingredient
Sodium Acetate (127-09-03)
CERCLA No
261.33 No
8(d) No
Chemical Weapons Convention: No
TSCA 12 (b):No
CDTA:No PURE/SOLID
SARA 311/312: Acute: Yes
Chronic: No
Iron Buffer Solution
odor
Fire: No
Pressure: No
Reactivity: No
Australian Hazchem Code: None allocated
Poison Schedule: None allocated
Conditions aggravated/target organs: Persons with preexisting skin,eye or respiratory disorders may be more susceptible. Acute: Skin,eye, respiratory and GI tract irritation, abdominal pain and vomiting. Chronic: Effects similar to those of acute exposure. Any means suitable for extinguishing
surrounding fire
Flammability
Health Reactivity
|
Revisions |
NFPA |
| 8/2/2010 | 0.1 updated msds to 16 section from 10 section msds. STN |
| 0 |
The information herein is believed to be accurate and is offered in good faith for the user's consideration and investigation. No warranty either expressed or implied is made for the completeness or accuracy of the information whether originating from the above mentioned company or not. Users of this material should satisfy themselves by independent investigation of current scientific and medical knowledge that the material
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
Iron Buffer Solution manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Iron Buffer Solution at a competitive price from us. We have ready stock of Iron Buffer Solution in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.