|
Porduct Name |
LIME WATER |
|
Part Number |
RXSOL-60-6604-831 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA
|
Phone |
+91 22 20871200 - 1400 |
|
Fax |
+91 22 27612100 :::AOH :0091 9821214367 |
|
Email |
rxsolchemicals@gmail.com |
|
Website |
www.rxmraine.com |
|
Chemical Name |
Cas No |
EC No |
Whight |
Formula |
|
LIME WATER |
1305-62-0 |
215-137-3 |
<= 100 % |
H2CaO2 |
|
Signal Word |
Danger |
|
Hazard Statements |
H318 Causes serious eye damage. |
|
Precautionary statements |
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. |
|
Supplemental Hazard Statements |
None |
|
Other hazards |
This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
|
General advice |
Show this material safety data sheet to the doctor in attendance. |
|
If inhaled |
After inhalation: fresh air. |
|
Eye Contact |
After eye contact: rinse out with plenty of water. Immediately call in ophthalmologist. Remove contact lenses. |
|
Swallowed |
After swallowing: immediately make victim drink water (two glasses at most). Consult a physician. |
|
Skin Contact |
In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower. |
|
Most important symptoms and effects, both acute and delaye |
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 |
|
Indication of any immediate medical attention and special treatment needed |
No data available |
|
Suitable extinguishing media |
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. |
|
Unsuitable extinguishing media |
For this substance/mixture no limitations of extinguishing agents are given. |
|
Special hazards arising from the substance or mixture |
Calcium oxide Not combustible. Ambient fire may liberate hazardous vapours. |
|
Further information |
Prevent fire extinguishing water from contaminating surface water or the ground water system. |
|
Advice for firefighters |
Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing. |
|
Personal precautions, protective equipment and emergency procedures |
Advice for non-emergency personnel: Avoid inhalation of dusts. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert. For personal protection see section 8. |
|
Enviromental Precaution |
Do not let product enter drains. |
Methods and materials for
containment and cleaning |
Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up dry. Dispose of properly. Clean up affected area. Avoid generation of dusts. |
|
Reference to other sections |
For disposal see section 13. |
|
Precautions for safe handling |
For precautions see section 2.2. |
|
Storage conditions |
Tightly closed. Dry. |
|
Storage class |
Storage class (TRGS 510): 13: Non Combustible Solids |
|
Specific end use(s) |
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated |
|
Eye/face protection |
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Tightly fitting safety goggles |
|
Body Protection |
protective clothing |
|
Skin protection |
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it. Full contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested:Dermatril® (KCL 740 / Aldrich Z677272, Size M) Splash contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested:Dermatril® (KCL 740 / Aldrich Z677272, Size M) data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 87300, e-mail sales@kcl.de, test method: EN374 If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the EC approved gloves. This recommendation is advisory only and must be evaluated by an industrial hygienist and safety officer familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario. |
|
Respiratory protection |
required when dusts are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter type: Filter type P2 The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
|
|
Control of environmental exposure |
Do not let product enter drains. |
|
Physical state |
Powder |
|
Colour |
Beige |
|
Odour |
No data available |
|
pH |
12,4 - 12,6 at 20 °C |
|
Melting Point |
>= 450 °C - Regulation (EC) No. 440/2008, Annex, A.1 |
|
Boiling Point |
2.850 °C - (decomposition) |
|
Flash Point |
6 °C - closed cup |
|
Flammability (solid, gas) |
No data available |
|
Upper/lower flammability or explosive limits |
No data available |
|
Autoignition temperature |
> 400 °C - Relative self-ignition temperature for solids |
|
Decomposition temperature |
No data available |
|
Vapour pressure |
No data available |
|
Viscosity |
No data available |
|
Density |
2,24 g/mL at 25 °C - lit. |
|
Relative Density |
2,22 at 20 °C - OECD Test Guideline 109 |
|
Partition coefficient |
Not applicable for inorganic substances |
|
Explosive properties |
No data available |
|
Solubility |
1,85 g/l at 20 °C - Regulation (EC) No. 440/2008, Annex, A.6 |
|
Particle characteristics |
No data available |
|
Reactivity |
No data available |
|
Chemical stability |
The product is chemically stable under standard ambient conditions (room temperature) . |
|
Possibility of hazardous reactions |
Exothermic reaction with: hydrogen sulphide Light metals phosphorus organic nitro compounds acids Risk of explosion with: anhydrides |
|
Conditions to avoid |
no information available |
|
Incompatible materials |
Light metals
|
|
Hazardous decomposition products |
In the event of fire: see section 5 |
|
Acute toxicity |
LD50 Oral - Rat - female - > 2.000 mg/kg (OECD Test Guideline 425) LC50 Inhalation - Rat - male and female - 4 h - > 6,04 mg/l - dust/mist (OECD Test Guideline 436) LD50 Dermal - Rabbit - male and female - > 2.500 mg/kg (OECD Test Guideline 402) |
|
Skin corrosion/irritation |
Skin - Rabbit Result: Irritating to skin. (OECD Test Guideline 404) |
|
Serious eye damage/irritation |
Eyes - Rabbit Result: Irreversible effects on the eye (OECD Test Guideline 405) Remarks: Risk of corneal clouding. Risk of blindness! |
|
Respiratory or skin sensitization |
No data available |
|
Carcinogenicity |
No data available |
|
Germ cell mutagenicity |
Test Type: In vitro mammalian cell gene mutation test Test system: mouse lymphoma cells Metabolic activation: with and without metabolic activation Method: OECD Test Guideline 476 Result: negative Test Type: Ames test Test system: Escherichia coli/Salmonella typhimurium Metabolic activation: with and without metabolic activation Method: OECD Test Guideline 471 Result: negative Test Type: Chromosome aberration test in vitro Test system: Human lymphocytes Metabolic activation: with and without metabolic activation Method: OECD Test Guideline 473 Result: negative |
|
Reproductive toxicity |
No data available |
|
Specific target organ toxicity - single exposure |
Inhalation - May cause respiratory irritation.
|
|
Additional Information |
Assessment : The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. RTECS: EW2800000 |
|
Persistence and degradability |
The methods for determining biodegradability are not applicable to inorganic substances. |
|
Toxicity to fish |
static test LC50 - Oncorhynchus mykiss (rainbow trout) - 50,6 mg/l - 96 h (OECD Test Guideline 203) |
|
Toxicity to daphnia and other aquatic invertebrates |
static test EC50 - Daphnia magna (Water flea) - 49,1 mg/l - 48 h (OECD Test Guideline 202) |
|
Toxicity to algae |
static test ErC50 - Pseudokirchneriella subcapitata (green algae) - 184,6 mg/l - 72 h (OECD Test Guideline 201) |
|
Mobility in soil |
No data available |
|
Results of PBT and vPvB assessment |
This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
|
Endocrine disrupting properties |
Assessment : The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. |
|
Other adverse effects |
No data available . |
|
Waste treatment Method |
See www.retrologistik.com for processes regarding the return of chemicals and containers, or contact us there if you have further questions. |
|
UN number |
ADR/RID:- IMDG:- IATA: - |
|
UN proper shipping name |
ADR/RID:Not dangerous goods IMDG:Not dangerous goods IATA:Not dangerous goods |
|
Transport hazard class(es) |
ADR/RID: - IMDG: - IATA:- |
|
Packaging group |
ADR/RID: - IMDG: - IATA:- |
|
Environmental hazards |
ADR/RID: No IMDG: No IATA: No |
|
Special precautions for user |
No data available |
|
Further information |
Not classified as dangerous in the meaning of transport regulations. |
|
Safety, health and environmental regulations/legislation specific for the substance or mixture |
This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006. |
|
Other regulations |
Take note of Dir 94/33/EC on the protection of young people at work. |
|
Chemical Safety Assessment |
A Chemical Safety Assessment has been carried out for this substance. |
|
Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and weassume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
|
