RXSOL CHEMO PHARMA International Navi Mumbai, India

Products

7,082 products across 97 categories for marine, industrial, water treatment and laboratory use.

Browse all products Product catalogue

Lab Chemical

Labdet Lab Cleaning Solution

Highly concentrate Product use for cleaning the lab glassware and lab equipment.
Part number
RXSOL-60-6293-005
Category
Lab Chemical
Brand
RXSOL
Labdet Lab Cleaning Solution

Overview

LABDET is highly concentrate Product use for cleaning the lab glassware and lab equipment. It is consists primarily of a homogeneous blend of surfactant,and ethoxylated alcohol. Labdet is anionic in nature.

Technical specifications

PHYSICAL DATA TYPICAL VALUE
pH as is 8.5
Specific gravity (g/ml) 1.07
Density (lbs./gal.)  8.9
Vapor pressure (mm Hg) 10.5
Flash Point (degrees F) None
Phosphate Content (as Phosphorus) 0%
Organic Carbon (% calculated w/w)  21%
Fragrance Content  0%
Surface Tension 1% Sol’n (Dyne/cm) 32

 

Applications

Used to clean:
Healthcare instruments, laboratory ware, vacuum equipment, tissue culture ware, personal protective equipment, sampling apparatus, catheters, tubing, disk drives, clean rooms, medical devices, optical parts, electronic components, pharmaceutical apparatus, cosmetics manufacturing equipment, metal castings, forgings and stampings, industrial parts, pipes, tanks and reactors. Authorized by USDA for use in federally inspected meat and poultry plants. Passes inhibitory residue test for water analysis. Used for phosphate sensitive analysis ware.

Used to remove:
Soil, grit, grime, slime, grease, oils, blood, tissue, particulates, deposits, chemical and solvents.

Surfaces cleaned:
Corrosion inhibited formulation recommended for glass, metal, stainless steel, porcelain, ceramic, plastic, cement and fiberglass. Can be used on soft metals such as copper, aluminum, zinc and magnesium if rinsed promptly. Used for art restoration. Corrosion testing may be advisable.

Dosage and directions

Cleaning method:
Soak, brush, sponge, cloth, ultrasonic, flow through clean-inplace.Will foam—not for spray or machine use.

Directions:

Make a fresh 1% solution (2 1/2 Tbsp. per gal., 1 1/4 oz. per gal. or 10 ml per liter) in cold, warm or hot water. If available, use warm water. Use cold water for blood stains. For difficult soils, raise water temperature and use more detergent. Clean by soak, circulate, wipe or ultrasonic method. Not for spray machines, will foam. RINSE THOROUGHLY—preferably with running water. For critical cleaning, do final or all rinsing in distilled, deionized or purified water. For food contact surfaces, rinse with potable water. Used on a wide range of glass, ceramic, plastic and metal surfaces. Corrosion testing may be advisable.

Characteristics and notes

Benefit :

  • Concentrated to save you money
  • Use to pass your cleaning validation tests for lab accreditation and plant inspection approval
  • Replaces corrosive acids and hazardous solvents
  • Phosphate free, biodegradable and readily disposable
  • Free rinsing to give you reliable results and no interfering residues.

Precautions:
No special precautions other than good industrial hygiene and safety practices employed with any industrial chemical (see Directions).

Safety and SDS

Read the safety data sheet before handling. Wear suitable gloves and eye protection.

View safety data sheet
Product Name

Labdet

Product Type RXSOL-60-6293-005

 Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA  

 Stock Point ::: Fujairah, Kandla, Mumbai, Chennai, Visakhapatnam, Kolkata, Muscat

Phone +91 22 27815540 / 41 / 42
Fax +91 22 2781 1318 :::AOH :0091 9322594669
Email rxsolchemicals@gmail.com

 

Mixtures

Component Classification Concentration
Nonylphenoxy poly(ethyleneoxy)ethanol, branched    
CAS-No.       68412-54-4
EC-No.         500-209-1
 
Skin Irrit. 2; Eye Irrit. 2; H315,H319
Xi, R36/38
20 - 25 
Proprietory Blend of Surfactant --- 45 - 54


For the full text of the H-Statements and R-Phrases mentioned in this Section, see Section 16


Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]
Skin irritation (Category 2)
Eye irritation (Category 2)

Classification according to EU Directives 67/548/EEC or 1999/45/EC
Irritating to eyes and skin.

Label elements
Labelling according Regulation (EC) No 1272/2008 [CLP]
Pictogram
Signal word :Warning
Hazard statement(s)

H315 Causes skin irritation.
H319 Causes serious eye irritation.

Precautionary statement(s)

P305 + P351+P338  IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Supplemental Hazard
Statements
none


According to European Directive 67/548/EEC as amended.
Hazard symbol(s)

R-phrase(s) R36/38 Irritating to eyes and skin.
S-phrase(s) S26  In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Other hazards None

 Description of first aid measures

General advice Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
 
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact Wash off with soap and plenty of water. Consult a physician.
In case of eye contact Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.

Most important symptoms and effects, both acute and delayed
Nausea, Headache, Vomiting, To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated.

Indication of any immediate medical attention and special treatment needed
No data available

5.1 Extinguishing media
 

Suitable extinguishing media Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture Carbon oxides
Advice for firefighters Wear self contained breathing apparatus for fire fighting if necessary.
Further information No data available
Personal precautions, protective equipment and emergency procedures Use personal protective equipment. Avoid breathing vapors, mist or gas. Ensure adequate ventilation.
Environmental precautions Do not let product enter drains.
Methods and materials for containment and cleaning up Soak up with inert absorbent material and dispose of as hazardous waste. Keep in suitable, closed containers for disposal.
Reference to other sections For disposal see section 13.
Precautions for safe handling Avoid contact with skin and eyes. Avoid inhalation of vapour or mist.
Conditions for safe storage, including any incompatibilities Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage.
Specific end use(s) no data available

Control parameters
Components with workplace control parameters

Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.

Personal protective equipment

Eye/face protection Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU)
Skin protection Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.
Body Protection
 
impervious clothing, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
 
Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).


 

Information on basic physical and chemical properties:

Appearance Form: liquid
Odour No data available
Odour Threshold No data available
pH 5,0 - 9,0
Melting point/freezing point Melting point/freezing point: -4 °C
Initial boiling point and boiling range > 200 °C
Flash point 279 - 291 °C
Evaporation rate No data available
Flammability (solid, gas) No data available
Upper/lower flammability or explosive limits No data available
Vapour pressure No data available
Vapour density No data available
Relative density 1,003 g/cm3
Water solubility No data available
Partition coefficient: noctanol/water No data available
Auto-ignition temperature No data available
Decomposition temperature No data available
Viscosity No data available
Explosive properties No data available
Oxidizing properties No data available

Other safety information
No data available

 

Reactivity No data available
Chemical stability No data available
Possibility of hazardous reactions No data available
Conditions to avoid No data available
Incompatible materials Strong oxidizing agents, Strong reducing agents
Hazardous decomposition products Other decomposition products - no data available

Information on toxicological effects
 

Acute toxicity No data available
Skin corrosion/irritation No data available
Serious eye damage/eye irritation No data available
Respiratory or skin sensitization No data available
Germ cell mutagenicity No data available
Carcinogenicity IARC:No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity No data available
Specific target organ toxicity - single exposure No data available
Specific target organ toxicity - repeated exposure No data available
Aspiration hazard No data available

Potential health effects

Inhalation May be harmful if inhaled. Causes respiratory tract irritation.
Ingestion May be harmful if swallowed.
Skin May be harmful if absorbed through skin. Causes skin irritation.
Eyes Causes serious eye irritation.

Signs and Symptoms of Exposure
Nausea, Headache, Vomiting, To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated.

Additional Information
RTECS: Not available

Toxicity No data available
Persistence and degradability No data available
Bioaccumulative potential No data available
Mobility in soil No data available
Results of PBT and vPvB assessment No data available
Other adverse effects No data available


Waste treatment methods

Product Offer surplus and non-recyclable solutions to a licensed disposal company.
Contaminated packaging Dispose of as unused product.


 

UN number

ADR/RID: - IMDG: - IATA: -

 UN proper shipping name

ADR/RID Not dangerous goods
IMDG Not dangerous goods
IATA Not dangerous goods

Transport hazard class(es)

ADR/RID: - IMDG: - IATA: -

Packaging group

ADR/RID: - IMDG: - IATA: -

Environmental hazard

ADR/RID No
IMDG Marine Pollutant No
IATA No

Special precautions for user
No data available 


This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations/legislation specific for the substance or mixture
No data available

Chemical Safety Assessment
No data available


Text of R and S phrase codes used in this safety data sheet:- R34: Causes burns; R36: Irritating to eyes; R37: Irritating to respiratory system; R41: Risk of serious damage to eyes. The information provided about the product on this Safety Data Sheet has been compiled from knowledge of the individual constituents The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product in terms of safety requirements and does not signify any warranty with regard to the product's properties The data given here only applies when product used for proper application(s). The product is not sold as suitable for other applications - usage in such may cause risks not mentioned in this sheet. Do not use for other application(s) without seeking advice from manufacturer 

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.


 

Request the signed SDS as PDF

Availability

Laboratory Detergent manufacturer, supplier and exporter in Mumbai, Kandla, Chennai, Kolkata, Visakhapatnam, Fujairah, Dubai, Sharjah, Abudhabi.

Our stock points and branches