Latex Remover
- Part number
- RXSOL-20-2040-025
- Category
- Tank Cleaner
- Brand
- RXSOL
Overview
RXSOL Latex Remover is very strong cleaner to remove various type of latex and latex films. It is free from hydrocarbon solvent and it is biodegradable.
Technical specifications
|
Appearance |
Liquid |
|
Color |
Light Yellow |
|
Odor |
Characteristic |
|
pH |
12.5-13 |
|
Density |
1.15 at 20°C |
Applications
Use for Tank cleaning of Cargo tank, Tank Container and Storage Tank. Also use in workshop as a stripper to clean the lates from floor ,
Dosage and directions
1. Butter worth the tank after discharge without any delay for 2 hours with warm fresh water and inject from the beginning on the RXSOL LATEX REMOVER. Make the solution of Rxsol Latex Remover 4-10% with water for tank cleaning procedures. Allow product to soak for 20 minutes and flash down with fresh water. Same for circulation method where time for circulation could be between 1-3 hours. An additional circulation could be necessary when deposits of Latex are quite heavy . Spray RXSOL LATEX REMOVER at ambient temperature and allow approximately 20 minutes activation time. The latex can then be removed with cold water by means of high pressure. If necessary, repeat this treatment.
2. Ventilate, mop and dry the tank. Some minor dried latex residues which could be present on heating coils and pump body have to be removed manually.Recommended preparations before loading and discharge of Latex: Prepare the loading/discharge connection directly at the pump stack of the respective tank and flange off the line to the manifold. Install a valve at this connection and use hoses for the shore connection (necessary length should be as short as possible). Close the drop line inside the tank by a flange or alternatively with wooden plug.If a plug has to be used cover this with plastic foil (At least 3 layers) and fix it with a stainless steel band. For loading and discharge use the deep well pump only. All other connections and openings inside the tank should be dismantled, flanged off or protected as described above (e.g. steam, nitrogen,vapour line connections etc). Fixed tank cleaning machines should be dismantled and blinder flanged. Tank dome hatches and Butter worth hatches including gaskets should be protected with a plastic foil which has to be placed between the dome and the hatch. Before loading steam the tank with very low pressure (1 bar) to make sure that the bulkheads, tank top, bottom and the lines inside the tank are humid but avoid any heat up. All equipment that might come into contact with the Latex should be washed with fresh water so they are humid before the loading takes place. Load the tank 100% and into the tank domes to prevent that the Latex comes into contact with air during the voyage. During loading the vessel must be therefore trimmed and kept on even keel to prevent air pockets in the tank. Before discharge remove the plugs of the vapour connection and steam connection and flush all equipment that might come into contact with Latex with fresh water During discharge keep the tank closed tokeep the humidity.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | RXSOL-20-2040-025 |
| Product Type | Latex Remover |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333 / 5555 / 9999 / 27611360 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
|
Chemica Name |
Concentration |
CAS Number |
EC Number |
|
2-Butoxyethanol |
25-35 |
111-76-2 |
203-905-0 |
|
Potassium Hydroxide |
5-25 |
1310-58-3 |
215-181-3 |
|
2-Aminoethanol |
10-25 |
141-43-5 |
205-483-3 |
|
d-glucopyranose, oligomeric, decyl octyl glycosides |
1.1-5 |
68515-73-1 |
500-220-1 |
| Proprieotry Blend of Emulsifier and Penetrating Agent | 40-50 | --- | --- |
|
Odour |
Characteristic |
|
Appearance |
Liquid, yelllo light |
|
Contact with eyes |
Severely corrosive to the eyes |
|
Contact with skin |
Harmful in contact with skin. |
|
Inhalation |
Harmful by inhalation. |
|
Ingestion |
May cause burns to mouth, throat and stomach. |
|
Contact with skin |
Flush contaminated skin with plenty of water. Remove contaminatedclothing and shoes. Wash contaminated clothing thoroughly with water before removing it, or wear gloves |
|
Contact with eyes |
Immediately flush eyes with plenty of water, occasionally lifting the upperand lower eyelids. Check for and remove any contact lenses. |
|
Ingestion |
Get medical attention immediately. Wash out mouth with water. Remove dentures if any. Move exposed person to fresh air. Keep person warm and at rest. If material has been swallowed and the exposed personis conscious, give small quantities of water to drink. |
|
Inhalation |
Move exposed person to fresh air. If it is suspected that fumes are stillpresent, the rescuer should wear an appropriate mask or self-contained breathing apparatus. . |
|
Fire-fighting measures |
Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus with a full face-piece operated in positive pressure mode. |
|
Personal Precautions |
No action shall be taken involving any personal risk or without suitable training. . |
|
Environmental Precaution |
Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains and sewers. Inform therelevant authorities if the product has caused environmental pollution |
|
Handling |
Eating, drinking and smoking should beprohibited in areas where this material is handled, stored and processed. Workers should wash hands andface before eating, drinking and smoking. Do not get in eyes or on skin or clothing. Do not breathe vapour ormist. Do not ingest. Use only with adequate ventilation. Wear appropriate respirator when ventilation isinadequate. |
|
Storage |
Store in accordance with local regulations. Store in a segregated and approved area. Store in originalcontainer protected from direct sunlight in a dry, cool and well-ventilated area, |
|
Exposure Limits |
If this product contains ingredients with exposure limits, personal, workplace atmosphere or biologicalmonitoring may be required to determine the effectiveness of the ventilation or other control measures and/orthe necessity to use respiratory protective equipment. |
|
Exposure controls |
Emissions from ventilation or work process equipment should be checked to ensure they comply with therequirements of environmental protection legislation. In some cases, fume scrubbers, filters or engineeringmodifications to the process equipment will be necessary to reduce emissions to acceptable levels. |
Gloves Goggles Suit No_Smoking
|
Odour |
Characteristic. |
|
Appearance |
Liquid, Yellow Light |
|
pH |
13 |
|
Boiling point |
100°C (212°F) |
|
Explosion limits |
Loower:1,1% , Upper:10,6% |
The product is stable. Under normal conditions of storage and use, hazardous polymerisation will not occur.
Reactive or incompatible with the following materials acids.
|
Toxicological information |
Contains material which causes damage to the following organs: blood, kidneys, lungs, liver, lymphatic=system, upper respiratory tract, skin, central nervous system (CNS), eye, lens or cornea. |
|
Contact with skin |
Severely corrosive to the skin. Causes severe burns. Harmful in contact with skin. |
|
Contact with eyes |
Severely corrosive to the eyes. Causes severe burns. |
|
Ingestion |
May cause burns to mouth, throat and stomach. |
|
Environmental effects Other adverse effects |
N.A N.A |
|
Disposal considerations |
Empty containers or liners mayretain some product residues. This material and its container must be disposed of in a safe way. Dispose ofsurplus and non-recyclable products via a licensed waste disposal contractor. Disposal of this product,solutions and any by-products should at all times comply with the requirements of environmental protectionand waste disposal legislation and any regional local authority requirements. Avoid dispersal of spilt materialand runoff and contact with soil, waterways, drains and sewers. |
N.A.
|
N.A |
Text of R and S phrase codes used in this safety data sheet:- R34: Causes burns; R36: Irritating to eyes; R37: Irritating to respiratory system; R41: Risk of serious damage to eyes. The information provided about the product on this Safety Data Sheet has been compiled from knowledge of the individual constituents The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product in terms of safety requirements and does not signify any warranty with regard to the product's properties The data given here only applies when product used for proper application(s). The product is not sold as suitable for other applications - usage in such may cause risks not mentioned in this sheet. Do not use for other application(s) without seeking advice from manufacturer .
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
Latex Remover Tank Cleaning Chemicals and Detergent Manufacturer and supplier in INDIA - UAE GULF - Oman. RXSOL-20-2040-025 is our specified Latex Cleaning Chemicals manufacaturer and supplier in Fujairah, Dubai, Sharjah, Ajman, Abudhabi, UAE GULF, Middle East, Ruwi Barka Gala, Barka Muscat Oman, Mumbai Kandla, Surat, Kolkata, Chennai, Visakhapatnam, Kakinada, Gandhidham, Paradip, Nairobi Kenya, Sudan Yemen, CANADA
