MASTERCLEAN Low Foam LIQUID
- Part number
- RXSOL-41-8454-025
- Category
- Automobiles
- Brand
- RXSOL
Overview
Formulated to clean the dirtiest carpets and heavily soiled traffic areas which makes it best performing powdered detergent in the industry. Its low foaming nature and additives to prevent corrosion in equipment and rinses clean.
Its easily mix formula for both truckmounts and portables. Leaves carpet clean, lustrous, and soft.
Dosage and directions
Portables: Mix 1 spoon per 5 gallons of hot water.
Truck Mount Equipment : Mix 3 cups in 5 gallons of water.
Leaves carpet clean, lustrous, and soft.
Ready to use pH of 10.0
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name |
MASTER CLEAN LIQUID |
| Product Type | RXSOL-41-8454-025 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333/ 5555 / 9999 / 27611360 / 27815540 |
| Fax | +91 22 2781 1318 :::AOH :0091 9322594669 |
| rxsolchemicals@gmail.com |
2.1 Hazardous Ingredients
2.1.1 2.1.2 2.1.3 2.1.4
CAS # EINECS # Name Concentration Warning, Risk phrases
7732-18-5 231-791-2 Water 50-80% None
36445-71-3 253-040-8 Anionic surfactant 5-15% R41, R51/53
18662-53-8 225-768-6 Trisodium nitrilotriacetate salt 5-15% R22, R41
6834-92-0 229-912-9 Sodium metasilicate 5-15% R34, R37
68439-46-3 226-097-1 Ethoxylated alcohol <1% R24, R37
94266-47-4 304-454-4 D-limonene <1% R10, R20/21/22
34590-94-8 250-104-2 Dipropylene glycol Monomethyl ether <1% R/20/21/22
2.1.5 Confidential ingredients: Inorganic base, 1-5% (R20/21/22); Anionic surfactant <1%; Corrosion inhibitor, <1%
2.1.6 Confidential Components listed are not hazardous less than 1 percent each.
2.1.7 Other information: Basic
Human: This product may cause severe irritation to eyes, skin and respiratory system. If swallowed the product may be harmful and cause severe irritation to mucous membranes. Avoid contact with strong acids & oxidising agents.
Environment: This product is unlikely to accumulate in aquatic environment.
Eye Contact: Flush with water for at least 15 minutes. Seek medical attention.
Skin Contact: Wash with soap and water. If irritation persists, seek medical attention.
Inhalation: Remove to fresh air. If trouble with breathing persists, seek medical attention.
Ingestion: Wash out mouth with water. Do not induce vomiting. Dilute with one to two glasses of water. Seek medical attention.
The product is combustible; use suitable extinguishing media for the surrounding fire. Self-contained breathing apparatus (SCBA) with full protective bunker gear for fire fighters. This product is likely to support combustion as it is combustible and not an oxidiser. Exposure hazard: decomposition of product may be oxides of carbon and nitrogen.
Sweep up spills for re-use or disposal. Large spills should be treated with dry absorbent and disposed at legal waste disposal site.
Check local authority for proper disposal methods. Do not mix this product with other waste materials.
Handle this product with best business practices.
Keep this product stored away from food, drink and animal feeding stuffs.
Keep out of the reach of children.
Store in a cool and dry area.
Do not store in aluminum containers.
COMBUSTIBLE – KEEP AWAY FROM OPEN FLAME.
Exposure limit values:
HTP values: None found
Other limit values: (USA) TWA: Alkyl alcohol (400 ppm)
OSHA PEL: Dipropylene glycol monomethyl ether (100 ppm)
Limit values in other countries: (AICS), (DSL), (ECL), (EEC),
(ENCS), (KECL) (MAC), (MAK), (PICC), (Swiss), (UK)
Dipropylene glycol monomethyl ether (300 ppm); Alkyl alcohol (400
ppm); D-limonene (20 ppm)
Exposure controls: Avoid contact with eyes, skin or clothing. Avoid ingesting the product as it may be harmful. Wear chemical imperious gloves to protect exposure to your hands.Wear chemical safety goggles or glasses to protect your eyes. In areas of insufficient ventilation, wear dist/mist mask to avoid long term effect of breathing the material.
The product is a clear, amber liquid with a citrus odour. Important health, safety and environmental information
| pH | 13.0 |
| Boiling point/boiling range | >100ºC (212ºF) |
| Freezing point | <0 ºC (32ºF) |
| Flash point | > 64.4ºC (148ºF) |
| Flammability (solid, gas) | NA |
| Explosive properties | Not explosive |
| Oxidising properties | Not an oxidiser |
| Vapour pressure | Low |
| Relative density | Same as water |
| Solubility | 100% in water |
| Specific gravity | 1.17 |
| RVOC% | 8.78 |
The product is stable and will not polymerise. Avoid strong acids & oxidising agents. In a fire situation, the products may be oxides of carbon and nitrogen.
Sub-acute, sub-chronic and prolonged toxicity have not been determined.
| Biodegradability | NA |
| Mobility | Soluble in water |
| Bio-accumulation | This product is unlikely to accumulate in waterways and will not accumulate in the environment. Some ingredients of this product have been determined to be toxic to fish and other organisms. |
.
Dispose in accord with National regulations. Do not mix waste material with other waste materials.
Identification UN3253
Proper Shipping Name Corrosive Material, (Disodium Trioxosiliate)
Hazard Class 8
Packing group III
US Domestic Ground Shipments: Consumer Commodity ORM-D [49CFR 173.154]
US Domestic Air Shipments: Consumer Commodity ORM-D-AIR
ILO: C (Corrosive)
WHMIS: Corrosive
Risk phrases: R20/22 - Harmful by inhalation and if swallowed
R36/38 – Irritating to eyes and skin
Safety phrases: S2 – Keep out of the reach of children
S13 – Keep away from food, drink and animal feeding stuffs
S24/25 - Avoid contact with skin and eyes
S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice
S37/39 - Wear suitable gloves and eye/face protection
S38 - In case of insufficient ventilation, wear suitable respiratory equipment
S62 - If swallowed do not induce
vomiting: seek medical advice immediately and show this container or label
Special regulations on certain preparations:
HMIS NFPA
1 Health 1
2 Fire 2
0 Reactivity/Instability 0
E PPE
Restrictions on use:
Ready to use after label dilution. This product is intended for professional use only.
Further information:
Call CHEM-TEL, INC. collect 1- 813-248-0582
Sources of key data used: EU, EEC Directives on the Control of Dangerous Substances and Preparations (67/548/EEC), Council Directive 88/379/EEC, WHMIS, NIOSH and OSHA 29 CFR Part 1910.1200.
This product contains no Prop 65 materials.
Products listed as harmful by USA, DSL, EINECS, AICS, ECL,EICS, ENCS, PICCS: Dipropylene glycol monomethyl ether, Limonene.
Availability
MASTERCLEAN Low Foam LIQUID manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of MASTERCLEAN Low Foam LIQUID at a competitive price from us. We have ready stock of MASTERCLEAN Low Foam LIQUID in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.