MOLYSOL E AR
- Part number
- RXSOL-60-6605-006
- Category
- Lab Chemical
- Brand
- RXSOL
Overview
MOLYSOL 'E' AR ensures that a consistently high defined quality is maintained throughout.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name |
|
||
| Product Type | MOLYSOL ‘E’ AR | ||
| Revised date |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Chennai, Visakhapatnam, Kolkata, Fujairah, Muscat Barka
| Phone | +91 22 27815541 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
2.1 Substances
Contains no other components or impurities which will influence the classification of the
product.
3.1 Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Flammable liquids (Category 2), H225
Eye irritation (Category 2), H319
For the full text of the H-Statements mentioned in this Section, see Section 16.
3.2 Label elements
Labelling according Regulation (EC) No 1272/2008
Pictogram : Signal word Danger
Hazard statement(s)
H225 Highly flammable liquid and vapour.
H319 Causes serious eye irritation.
Precautionary statement(s)
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources.
No smoking.
P280 Wear eye protection/ face protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue rinsing.
P337 + P313 If eye irritation persists: Get medical advice/ attention.
P403 + P235 Store in a well-ventilated place. Keep cool.
Supplemental Hazard
Statements : none
3.3 Other hazards
This substance/mixture contains no components considered to be either persistent,
bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at
levels of 0.1% or higher.
4.1 Descriptionof first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration.
Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Do NOT induce vomiting. Never give anything by mouth to an unconscious person.
Rinse mouth with water. Consult a physician.
4.2 Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labeling.
4.3 Indication of any immediate medical attention and special treatment needed
No data available
5.1 Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
5.2 Special hazards arising from the substance or mixture
Carbon oxides
5.3 Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
5.4 Further information
Use water spray to cool unopened containers.
6.1 Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid breathing vapours, mist or gas. Ensure
adequate ventilation.
Remove all sources of ignition. Evacuate personnel to safe areas. Beware of vapours
accumulating to form explosive concentrations. Vapours can accumulate in low areas.
For personal protection see.
6.2 Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
6.3 Methods and materials for containment and cleaning up
Contain spillage, and then collect with an electrically protected vacuum cleaner or by
wet-brushing and place in container for disposal according to local regulations.
6.4 Reference to other sections
For disposal.
7.1 Precautions for safe handling
Avoid contact with skin and eyes. Avoid inhalation of vapour or mist.
Keep away from sources of ignition - No smoking.Take measures to prevent the build up
of electrostatic charge.
7.2 Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Containers which are opened must be carefully resealed and kept upright to prevent
leakage. Hygroscopic. Flammable liquids
7.3 Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated
8.1 Control parameters
8.2 Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands
before breaks and at the end of workday.
Personal protective equipment
Eye/face protection
Face shield and safety glasses Use equipment for eye protection tested and approved
under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal
technique (without touching glove's outer surface) to avoid skin contact with this product.
Dispose of contaminated gloves after use in accordance with applicable laws and good
laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy
the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.
Full contact
Material: butyl-rubber
Minimum layer thickness: 0.3 mm
Break through time: 480 min
Splash contact
Material: Nitrile rubber
Minimum layer thickness: 0.2 mm
Break through time: 38 min
If used in solution, or mixed with other substances, and under conditions which differ
from EN 374, contact the supplier of the CE approved gloves. This recommendation is
advisory only and must be evaluated by an industria situation of anticipated use by our
customers. It should not be construed as offering an approval for any specific use
scenario.
Body Protection
Impervious clothing, Flame retardant antistatic protective clothing., The type of
protective equipment must be selected according to the concentration and amount of the
dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use (US) or type
ABEK (EN 14387) respirator cartridges as a backup to enginee protection, use a full-face
supplied air respirator. Use respirators and components tested and approved under
appropriate government standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
9.1 Information on basic physical and chemical properties
Appearance Form: liquid, clear
Odour Threshold: No data available
pH : No data available
Melting point/range: -114 °C
Initial boiling point and boiling range : 78 °C
Flash point 14.0 °C - closed cup
Evaporation rate: No data available
Flammability (solid, gas) : No data available
Upper/lower flammability or
Upper explosion limit: 19 %(V)
Lower explosion limit: 3.3 %(V)
explosive limits
Vapour pressure: 44.6 mmHg at 20.0 °C
Vapour density : No data available
Relative density: 0.789 g/mL at 25 °C
Water solubility: completely soluble
Partition coefficient: n- octanol/water
log Pow: -0.349 at 24 °C
Auto-ignition temperature :363.0 °C
Decomposition temperature : No data available
Viscosity: No data available
Explosive properties : No data available
Oxidizing properties : No data available
9.2 Other safety information
No data available
10.1 Reactivity
No data available
10.2 Chemical stability
Stable under recommended storage conditions
10.3 Possibility of hazardous reactions
No data available
10.4 Conditions to avoid
Heat, flames and sparks.
10.5 Incompatible materials
Alkali metals, Oxidizing agents, Peroxides
10.6 Hazardous decomposition products
Other decomposition products - No data available
Hazardous decomposition products formed under fire conditions. - Carbon oxides
In the event of fire: see section 5
11.1 Information on toxicological effects
Acute toxicity
LD50 Oral - Rat - 10,470 mg/kg
LC50 Inhalation - Rat - 4 h - 30,000 mg/l
LD50 Dermal - Rabbit - 15,800 mg/kg
Skin corrosion/irritation
Skin - Rabbit
Result: No skin irritation - 24 h
(OECD Test Guideline 404)
Serious eye damage/eye irritation
Eyes - Rabbit
Result: Moderate eye irritation
(OECD Test Guideline 405)
Respiratory or skin sensitisation
No data available
Germ cell mutagenicity
No data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is
identified as probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
Specific target organ toxicity - single exposure
No data available
Specific target organ toxicity - repeated exposure
No data available
Aspiration hazard
No data available
Additional Information
Central nervous system depression, narcosis, Damage to the heart., To the best of our
knowledge, the chemical, physical, and toxicological properties have not been thoroughly
investigated.
12.1 Toxicity
Toxicity to fish LC50 - Pimephales promelas (fathead minnow) - 14,200 mg/l - 96 h
Toxicity to daphnia and other aquatic invertebrates
LC50 - Ceriodaphnia dubia (water flea) - 5,012 mg/l - 48 h
NOEC - Daphnia magna (Water flea) - 9.6 mg/l - 9 d
Toxicity to algae EC50 - Chlorella vulgaris (Fresh water algae) - 275 mg/l - 72 h
(OECD Test Guideline 201)
12.2 Persistence and degradability
Biodegradability Result: 95 % - Readily biodegradable.
12.3 Bioaccumulative potential
Due to the distribution coefficient n-octanol/water, accumulation in organisms is not
expected.
12.4 Mobility in soil
No data available
12.5 Results of PBT and vPvB assessment
This substance/mixture contains no components considered to be either persistent,
bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at
levels of 0.1% or higher.
12.6 Other adverse effects
No data available
13.1 Waste treatment methods
Burn in a chemical incinerator equipped with an afterburner and scrubber b highly
flammable. Offer surplus and non-recyclable solutions to a licensed disposal company.
Contaminated packaging
Dispose of as unused product.
14.1 UN number
ADR/RID: 1170 IMDG: 1170 IATA: 1170
14.2 UN proper shipping name
ADR/RID: Molysol ‘E’
IMDG: Molysol ‘E’
IATA: Molysol ‘E’
14.3 Transport hazard class(es)
ADR/RID: 3 IMDG: 3 IATA: 3
14.4 Packaging group
ADR/RID: II IMDG: II IATA: II
14.5 Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
14.6 Special precautions for user
No data available
15.1 Safety, health and environmental regulations/legislation specific for the
substance or mixture
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
15.2 Chemical safety assessment
For this product a chemical safety assessment was not carried out
Abbreviations and acronyms : PBT: persistent, bioaccumulative and toxic.
vPvB: very persistent and very bioaccumulative
Sources of key data used : REGULATION (EC) No 1272/2008 OF THE EUROPEAN
PARLIAMENT AND OF THE COUNCIL of 16 December 2008 on classification,
labelling and packaging of substances and mixtures, amending and repealing Directives
67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006
Further information : None.
In accordance with REACH Regulation (CE) Nº 1907/2006 and with CLP Regulation
(CE) Nº 1272/2008
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
[MOLYSOL E AR] manufacturers, suppliers, exporters in Mumbai, Gandhidham, Kolkata, Varanasi, Visakhapatnam, Chennai, Fujairah, Dubai, Canada BC, Barka, Sohar, Muscat, Oman.
Lab chemicals manufacturers, suppliers, exporters in India, UAE Middle East, Barka, Sohar, Muscat, Oman, Canada.
[MOLYSOL E AR] is available in small packing as well as in bulk. Buy premium quality [MOLYSOL E AR] and other lab chemicals from one of the most trusted brands.
