Malonic Acid
- Part number
- RXSOL-95-1781-005
- Category
- Medicine
- Brand
- RXSOL
Overview
Malonic Acid is an alpha, omega-dicarboxylic acid in which the two carboxy groups are separated by a single methylene group. It is the second-smallest aliphatic dicarboxylic acid. Malonates are the ionized form of malonic acid, along with its esters and salts. It appears as a white crystal or crystalline powder. It dissolves in alcohol, pyridine, and ether.
Applications
Malonic acid is used as a precursor in polymers and polyester.
It is widely used in flavours as well as the fragrance industry.
It is used to control the acidity.
It is used in pharmaceutical products.
It is used as a cross-linking agent between potato starch and cornstarch to enhance its mechanical properties.
It is used in the preparation of barbituric salt.
It is used in Electroplating.
It is used to produce vitamin B1, vitamin B6, vitamin B2, and amino acids.
It is used in chemical synthesis as a building block
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | : Malonic Acid |
| Part Number | : RXSOL-19-1781-025 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Chennai, Kandla, Kolkata, Visakhapatnam, Fujairah, Muscat, Nairobi
| Phone | +91 22 20871200-1400 |
| Fax | +91 22 20871500 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com | |
| Website | www.rxmarine.com |
| Name of Substance | Cas Number | EINECS No | Wt.% | Symbol |
| Propanedioic acid | 141-82-2 | 205-503-0 | 104,06 g/mol | C3H4O4 |
| Signal Word | Danger. |
| Hazard Statements |
Causes serious eye damage. |
| Classification |
Classification according to Regulation (EC) No 1272/2008
Serious eye damage (Category 1), H318
|
| Additional information |
This substance/mixture contains no components considered to be either persistent,
bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at
levels of 0.1% or higher.
|
| Precautionary statements - |
P280 Wear eye protection/ face protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue
rinsing.
|
| General advice | Show this material safety data sheet to the doctor in attendance. |
| Eye Contact | Rinse out with plenty of water. Immediately call in ophthalmologist. Remove contact lenses. |
| Skin Contact | Take off immediately all contaminated clothing. Rinse skin with water/ shower. |
| Inhalation | fresh air. |
| Effects | The most important known symptoms and effects are described in the labelling. |
| Notes to Physicians | Immediately make victim drink water (two glasses at most). Consult a physician. |
| Suitable extinguishing media | Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.Water Foam Carbon dioxide (CO2) Dry powder. |
|
Extinguishing media which must not be used for safety reasons |
For this substance/mixture no limitations of extinguishing agents are given.For this
substance/mixture no limitations of extinguishing agents are given.
|
| Special exposure hazards arising from the substance itself, combustion products, resulting gases: | Carbon oxides, Combustible. Vapors are heavier than air and may spread along floors. Forms explosive mixtures with air on intense heating. Development of hazardous combustion gases or vapours possible in the event of fire. |
| Special protective equipment for fire-fighters | In the event of fire, wear self-contained breathing apparatus. |
| Additional information | Prevent fire extinguishing water from contaminating surface water or the ground water system. |
|
Personal precautions, protectiveequipment and emergency procedures |
Advice for non-emergency personnel: Avoid inhalation of dusts. Avoid substance contact.
Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.
|
| Enviromental Precaution | Do not let product enter drains. |
| Methods and materials for containment and cleaning up | Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions. Take up dry. Dispose of properly. Clean up affected area. Avoid generation of dusts. |
| Advice on safe handling | Do not ingest. Do not get in eyes, on skin, or on clothing. Do not breathe dust/ fume/ gas/ mist/ vapors/ spray. Use only with adequate ventilation. Wash hands thoroughly after handling. |
| Storage | Tightly closed. Dry. Non Combustible Solids. |
| Advice on general | Apart from the uses mentioned in other specific uses are stipulated. |
| Engineering Control | Ingredients with workplace control parameters. |
| Personal Protection | Eye protection :Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Tightly fitting safety goggles. Skin protection : Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it. Body Protection: protective clothing. Respiratory protection :required when dusts are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter type: Filter type P2 The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented. |
|
Exposure Limits |
Do not let product enter drains. |
| Additional information | Full contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested:Dermatril® (KCL 740 / Aldrich Z677272, Size M) Splash contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested:Dermatril® (KCL 740 / Aldrich Z677272, Size M) data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 87300, e-mail sales@kcl.de, test method: EN374 If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the EC approved gloves. This recommendation is advisory only and must be evaluated by an industrial hygienist and safety officer familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario. |
Gloves Suit
| Form | powder |
| Colour |
white
white
|
| Odour | odorless |
| Boiling point and boiling range |
215 °C at 18,66 hPa
(decomposition)
|
| Flash Point | 157 °C - c.c. |
| Freezing Point | Melting point/range: 132 - 135 °C - dec. |
| pH | No data available |
| Evaporation rate | No data available |
| Flammability (solid, gas) | The product is not flammable. - Flammability (solids) |
| Upper explosion limit | No data available |
| Lower explosion limit | No data available |
| Explosive properties | No data available |
| Vapor pressure | 0,002 hPa at 25 °C |
| Relative vapor density | No data available |
| Relative density | 1,03 at 20 °C - Regulation (EC) No. 440/2008, Annex, A.3 |
| Water solubility | 766 g/l at 20 °C - Regulation (EC) No. 440/2008, Annex, A.6 |
| Solubility in other solvents | No data available |
| Partition coefficient: octanol | log Pow: -0,81 - Bioaccumulation is not expected., (Lit.) |
| Autoignition temperature | No data available |
| Thermal decomposition | No data available |
| Viscosity, kinematic | No data available |
| Explosive properties | No data available |
| Oxidizing properties | None |
| Molecular weight | No data available |
| VOC | No data available |
| Recativity |
Forms explosive mixtures with air on intense heating.
A range from approx. 15 Kelvin below the flash point is to be rated as critical.
The following applies in general to flammable organic substances and mixtures: in
correspondingly fine distribution, when whirled up a dust explosion potential may generally
be assumed.
|
| Stability | The product is chemically stable under standard ambient conditions (room temperature) . |
| Possibility of hazardous reactions |
Violent reactions possible with:
alkalines
Strong oxidizing agents
|
| Incompatible materials | Bases, Oxidizing agents, Reducing agents. |
| Hazardous Decomposition |
In the event of fire. |
| Condition to Avoid | Strong heating. |
| Route of Exposure | Symptoms of exposure may include burning sensation, coughing, wheezing, laryngitis, shortness of breath, headache, nausea, and vomiting. To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. Other dangerous properties can not be excluded. Handle in accordance with good industrial hygiene and safety practice. |
| Eyes |
Causes serious eye damage. |
| Skin | No skin irritation |
| Acute oral toxicity |
LD50 Oral - Rat - male - 3.250 mg/kg (OECD Test Guideline 401) Symptoms: Possible damages:, mucosal irritations
Dermal: No data available.LD50 Oral - Rat - male - 3.250 mg/kg
(OECD Test Guideline 401)
Symptoms: Possible damages:, mucosal irritations
Dermal: No data available
|
| Additional information | The substance/mixture does not contain, components considered to have endocrine, disrupting, properties according to REACH Article, 57(f) or Commission Delegated regulation (EU), 2017/2100 or, Commission Regulation (EU), 2018/605 at levels of 0.1% or higher.Repeated dose toxicity - Rat - male - Oral - 52 Days - NOAEL (No observed adverse effect level) - 100 mg/kg. |
| Toxicity to fish | flow-through test LC50 - Oryzias latipes - > 95,4 mg/l - 96 h |
| Toxicity to daphnia and others | static test EC50 - Daphnia magna (Water flea) - > 100 mg/l - 48 h |
| Toxicity to algae | static test ErC50 - SELENASTRUM - > 998 mg/l - 72 h |
| Persistence and degradability | No data available |
| Bioaccumulative potential | No data available |
| Mobility in soil | No data available |
| Results of PBT and vPvB | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
| Additional information | The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. |
| Waste Disposal |
See www.retrologistik.com for processes regarding the return of chemicals and containers, or contact us there if you have further questions. |
Hazard Pictograms:
| UN Number | -- |
| Proper shipping name |
ADR/RID: Not dangerous goods, IMDG: Not, dangerous goods,
IATA: Not dangerous goods
|
| Transport hazard class(es) 8 | |
| ADR/RID | No |
| Subsidiary risk IMDG | -- |
| Subsidiary risk IATA | -- |
| Packing group | |
| Packing group | -- |
| Environmental hazards | |
| Environmental hazards | No |
| Marine pollutant | No |
| ADR/RID | |
| Hazard ID | -- |
| Tunnel Category | -- |
| IMDG | |
| EmS Code | -- |
| IATA | |
| Packing Instruction (Cargo) | -- |
| Maximum quantity | -- |
| Packing Instruction (Passenger) | -- |
| Maximum quantity | -- |
| Regulations | Take note of Dir 94/33/EC on the protection of young people at work. |
| Chemical safety assessment | For this product a chemical safety assessment was not carried out. |
| Further information |
This material safety data sheet complies with the requirements of
Regulation (EC) No.1907/2006.
|
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |
Availability
Malonic Acid exporter and supplier in India UAE MiddleEast Oman. Malonic Acid distributor and supplier in Fujairah Muscat Mumbai Kolkata, Chennai, Visalhapatnam, Gandhidham SURAT Gujrat, Dubai, Sharjah, Ajman, Abudhabi, Barka Muscat Ruwi, Nairobi Kenya, Sudan, Yemen
