Drilling Fluids & Mud Oil Field chemicals
Oil Based Mud Lubricant GLOLUBE
- Part number
- RXSOL-81-8153-025
- Brand
- RXSOL
Overview
RXSOL Oil Based Mud Lubricant is a environmentally friendly Oil Based lubricant, specially formulated for Sodium Silicate systems, designed to reduce torque & drag and to lower the potential of bottom hole assembly balling in all water base muds under extreme pressure conditions. It imparts extreme pressure Lubricating Properties to the drilling fluids and prevents wall sticking. Its also optimizes the performance of oil-based drilling fluids used on ERD wells or wells with complex trajectories that otherwise would be difficult to drill without exceeding the torque and drag limits of the rig. It also is recommended for slimhole applications to increase the effective weight on bit (WOB) and hence ROP.
Technical specifications
Physical Properties:
| Appearance | : | Brownish Black Liquid |
| Specific Gravity | : | 0.90 to 0.95 |
| PH | : | Neutral |
| Solubility | : | Slightly Dispersible in water, Soluble in Oil |
| Thermal Stability | : | >160oC |
| Lubricity Coefficient | : | <0.20 |
Dosage and directions
RXSOL Oil Based Mud Lubricant should be added at 1% to 3% concentration by volume depending on the severity of the problem. Care should be taken when adding Oil Based Mud Lubricant to invert-emulsion systems with high solids as viscosity can increase. Pilot testing is strongly recommended to determine any effects on the system's rheological properties for all initial applications and subsequent treatments.
RXSOL Oil Based Mud Lubricant should be added slowly and directly to the mud system, maintaining a small constant stream wherever there is good agitation or through the mixing hopper.
Characteristics and notes
Advantages:
It reduces torque & drag.
It will not adversely affect rheology or gel strength.
Stable at high circulation temperatures and does not undergo chemical degradation.
May Help in Shale inhibition
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | Oil Based Mud Lubricant GLOLUBE |
| Part Number | RXSOL-81-8153-025 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Kandla, Hazira, Mumbai, Chennai, Vizag, Kolkata , Fujairah, OMAN CANADA, Nairobi Kenya
| Phone | +91 22 20871200 / 1300 / 1400 |
| Fax | +91 22 27612100 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com | |
| Website | www.rxmarine.com |
| Name of Substance | Cas Number | EC Number | Weight % |
| FATTY ACIDS, TALL-OIL | 61790-12-3 | 263-107-3 | 10-30% |
| RAPESEED OIL | 8002-13-9 | 232-299-0 | 30-40% |
| Proprietory Blend | ----- | ---- | 20-30 |
| Signal Word | Warning |
| Hazard Statements |
H312 + H332 Harmful in contact with skin or if inhaled H315 Causes skin irritation. |
| Precautionary statements - prevention |
Wear protective gloves/protective clothing/eye protection/face protection.Use only outdoors or in a well-ventilated area.Wash face, hands and any exposed skin thoroughly after handling.Do not breathe dust/fume/gas/mist/vapors/spray.Keep away from heat/sparks/open flames/hot surfaces. - No smoking Keep container tightly closed Ground/bond container and receiving equipment Use explosion-proof electrical/ventilating/lighting/equipment Use only non-sparking too |
| Precautionary statements - response | Get medical attention/advice if you feel unwell |
| Skin Contact | Wash off immediately with plenty of water for at least 15 minutes. Immediate medical attention is required. |
| Eye Contact | Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Obtain medical attention. |
| Inhalation: | Move to fresh air. If not breathing, give artificial respiration. Get medical attention ifm symptoms occur. Risk of serious damage to the lungs. |
| Ingestion | Clean mouth with water and drink afterwards plenty of water. Do not induce vomiting. Call a physician or Poison Control Center immediately. If vomiting occurs naturally, have victim lean forward. |
| Most important symptoms/effects | Breathing difficulties. Symptoms of overexposure may be headache, dizziness, tiredness, nausea and vomiting. |
| Notes to Physician | Treat symptomatically |
| Suitable extinguishing media | Alcohol resistant foam. Water spray, dry powder or carbon dioxide. |
| Unsuitable Fire & Explosion Hazard | No unusual fire or explosion hazards noted. |
| Sensitivity to Mechanical Impact | No information available |
| Sensitivity to Static Discharge | No information available |
| Specific Hazards Arising from the Chemical | By heating and fire, harmful vapours/gases may be formed. |
| Special Fire Fighting Procedure | Avoid water in straight hose stream; will scatter and spread fire. |
| Protective Equipment and Precautions for Firefighters | Self contained breathing apparatus and full protective clothing must be worn in case of fire. |
| Further Information | Remove container from danger zone and cool with water. Prevent fire extinguishing water from contaminating surface water or the ground water system. |
| Spillage | Absorb with an inert material and put the spilled material in an appropriate waste disposal.Flammable liquid. Keep away from heat. Keep away from sources of ignition. Stop leak if without risk. Absorb with DRY earth, sand or other non-combustible material. Do not touch spilled material. Prevent entry into sewers, basements or confined areas; dike if needed. Be careful that the product is not present at a concentration level above TLV. Check TLV on the MSDS and with local authorities. |
| Personal Protection | Use personal protective equipment. Ensure adequate ventilation. Remove all sources of ignition. Take precautionary measures against static discharges. |
| Enviromental Precaution | Should not be released into the environment. See Section 12 for additional ecological information. Avoid release to the environment. Collect spillage. Do not flush into surface water or sanitary sewer system. |
| Methods and materials for containment and cleaning | Soak up with inert absorbent material. Keep in suitable, closed containers for disposal. Remove all sources of ignition. Use spark-proof tools and explosion-proof equipment |
| Handling | Wear personal protective equipment. Do not get in eyes, on skin, or on clothing. Use only under a chemical fume hood. Do not breathe vapors or spray mist. Do not ingest. Keep away from open flames, hot surfaces and sources of ignition. Use only non-sparking tools. To avoid ignition of vapors by static electricity discharge, all metal parts of the equipment must be grounded. Take precautionary measures against static discharges. |
| Storage | Keep containers tightly closed in a dry, cool and well-ventilated place. Keep away from heat and sources of ignition. Flammables area. Corrosives area. |
| Hygiene measures | Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance. |
| Engineering Control | Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below their respective threshold limit value. Ensure that eyewash stations and safety showers are proximal to the work-station location. |
| Personal Protection |
Skin and body protection : Wear appropriate protective gloves and clothing to prevent skin exposure. Long sleeved clothing.Flame retardant antistatic protective clothing. Respiratory Protection : Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. |
| Hygiene Measures | Handle in accordance with good industrial hygiene and safety practice. |
Gloves Suit
| Form | Liquid |
| Colour | Brownnis, Black |
| Odour | Characteristic |
| Odor Threshold | No Information Available |
| pH | 6 -7 |
| Melting Point | -10 °C |
| Boiling Point | 143 - 145 °C / 289.4 - 293 °F |
| Flash Point | 160 °C |
| Vapour pressure | < 1 mbar 38 |
| Vapour Density | >1 |
| Secific Gravity | 0.91- 0.95 |
| Solubility in Water | Slightly dispersible in water. |
| Viscosity | No information available |
| Recativity Hazard | None known, based on information available |
| Stability | Product is stable. |
| Possibility of hazardous reactions | No known hazardous reactions. |
| Conditions to avoid | Strong oxidising substances. |
| Incompatible materials | Strong oxidizing agents, Strong reducing agents |
| Hazardous Decomposition Products | Toxic gases/vapours/fumes of: Carbon monoxide (CO). Carbon dioxide (CO2). |
| Hazardous Polymerization | Hazardous polymerization does not occur. Hazardous Reactions None under normal processing |
| Inhalation | May cause irritation to the respiratory system |
| Ingestion | May cause gastric distress, nausea and vomiting if ingested. |
| Skin corrosion | Prolonged and frequent contact may cause redness and irritation. |
| Toxic Effects on Humans | Acute Potential Health Effects: Skin: Causes skin irritation. Can be absorbed through skin. Eyes: Causes eye irritation. Inhalation: Vapor causes respiratory tract and mucous membrane irritation. |
| Special Remarks on Chronic Effects on Humans | Detected in maternal milk in human. Passes through the placental barrier in animal. Embryotoxic and/or foetotoxic in animal. May cause adverse reproductive effects (male and femael fertility (spontaneous abortion and fetotoxicity) and birth defects based animal data. |
| Toxicity to Fish | No information available. |
| COD and BOD 5 | Not Available |
| Products of Biodegradation: | No information available. |
| Mobility in soil | No information available. |
| Results of PBT and vPvB assessment | Substance(s) in the mixture do(es) not meet the criteria for PBT or vPvB according to Regulation (EC) No 1907/2006, Annex XIII, or a PBT/vPvB assessment was not conducted. |
| Other adverse effects |
Additional ecological information Discharge into the environment must be avoided. |
| Waste treatment Method | Waste material must be disposed of in accordance with the national and local regulations. Leave chemicals in original containers. No mixing with other waste. Handle uncleaned containers like the product itself |
| DOT/TDG/ITA/IMDG/IMO | The product is not covered by international regulation on the transport of dangerous goods (IMDG, IATA, ADR/RID). |
| Proper shipping name | Not Regulated |
| Hazard Class | Not Regulated |
| Packing group | Not Regulated |
| RISK PHRASES | Not Classified |
| SAFETY PHRASES | Not Classified |
| UK REGULATORY REFERENCES | The Control of Substances Hazardous to Health Regulations Chemicals (Hazard Information & Packaging) Regulations. |
| EU DIRECTIVES | Dangerous Substance Directive 67/548/EEC. Dangerous Preparations Directive 1999/45/EEC. |
| GUIDANCE NOTES | Workplace Exposure Limits EH40 |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if RX Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |
Availability
Oil Based Mud Lubricant GLOLUBE manufacturer and supplier in Mumbai Vizag Haldia India, Dubai Sharjah UAE, Muscat Sohar Oman, Canada, Nairobi Kenya Africa
