P DIMETHYL AMINO CINNAMALDEHYDE AR
- Part number
- RXSOL-60-6605-193
- Category
- Lab Chemical
- Brand
- RXSOL
Overview
p-Dimethylaminocinnamaldehyde (DMACA) is an aromatic hydrocarbon. It is used in an acidic solution to detect indoles.
Abbreviations: DMACA
Boiling point: 329 °C (624 °F; 602 K)
Melting point: 138 °C (280 °F; 411 K)
Chemical formula: C11H13NO
Applications
Application
4-(Dimethylamino)cinnamaldehyde (DMAC) has been used in the serine protease inhibition assay.
It has been used for the detection of (epi)-flavan-3-ols and proanthocyanidin polymers in Brassica napus seeds.
It has been used for the determination of phenolic compounds in leaf samples.
It has been used for the staining of flavan-3-ols in plant samples.
Characteristics and notes
Cytochrome P450 2A13 is a lung specific enzyme known to activate the potent tobacco procarcinogen 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone (NNK) into two carcinogenic metabolites. CYP2A13 has been crystallized and X-ray diffraction experiments illuminated the structure of this enzyme, but with an unknown ligand present in the enzyme active site.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | P-DIMETHYL AMINO BENZALDEHYDE AR |
| Part Number | RXSOL-60-6605-193 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA
| Phone | +91 22 20871200 - 1400 |
| Fax | +91 22 27612100 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com | |
| Website | www.rxmarine.com |
| Chemical Name | CAS | EC .NO | % by Weight |
| P-DIMETHYL AMINO BENZALDEHYDE AR | 100-10-7 | 202-819-0 | 99% |
| Signal Word | NA |
| Potential Acute Health Effects | NA |
| Potential Chronic Health Effects | NA |
| Hazard Statements | NA |
| P280 Wear protective gloves.P305 + P351 + P338 | None. |
| Precautionary statements - response | None |
| Supplemental Hazard Statements | None |
| Other hazards | The substance does not fulfil the criteria to be identified as PBT substance or vPvB substance according to Annex XIII of Regulation REACH. |
| General advice | Never give anything by mouth to an unconscious person. If you feel unwell, seek medical advice (show the label where possible |
| If inhaled | NA |
| Eye Contact | Rinse immediately with plenty of water. Obtain medical attention if pain, blinking or redness persist. |
| Swallowed | NA |
| Skin Contact | Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse.y. |
| Serious Skin Contact: | NA |
| Inhalation | Assure fresh air breathing. Allow the victim to rest. |
| Ingestion | Obtain emergency medical attention. Rinse mouth. Do NOT induce vomiting |
| Notes to Physician | Treat symptomatically |
| Symptoms relating to use | Not expected to present a significant hazard under anticipated conditions of normal use |
| Most important symptoms and effects, both acute and delaye | The most important known symptoms and effects are described in the labelling |
| Flammability | Foam. Dry powder. Carbon dioxide. Water spray. Sand. |
| Auto-Ignition Temperature | 363°C (685.4°F) |
| Flash Point | CLOSED CUP Higher than 93.3°C (200°F). OPEN CUP 198.89°C (390°F) - 218.33 C (425 F). |
| Flammable Limits | Not available. |
| Products of Combustion | These products are carbon oxides (CO, CO2). Fire Hazards in Presence of Various Substances: Slightly flammable to flammable in presence of heat. Non-flammable in presence of shocks. Explosion Hazards in Presence of Various Substances: Risks of explosion of the product in presence of mechanical impact: Not available. Risks of explosion of the product in presence of static discharge: Not available. Fire Fighting Media and Instructions: SMALL FIRE: Use DRY chemical powder. LARGE FIRE: Use water spray, fog or foam. Do |
| Suitable extinguishing media | Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. |
| Unsuitable extinguishing media | Do not use a heavy water stream. |
| Special hazards arising from the substance or mixture | Carbon oxides Zinc/zinc oxides Not combustible. Ambient fire may liberate hazardous vapours. |
| Further information | Suppress (knock down) gases/vapors/mists with a water spray jet. Prevent fire extinguishing water from contaminating surface water or the ground water system. |
| Hazardous combustion products | Surrounding fires |
| Advice for firefighters | Do not enter fire area without proper protective equipment, including respiratory protection. Exercise caution when fighting any chemical fire. Avoid (reject) fire-fighting water to enter environment. |
| Protective Equipment | Use personal protective equipment. |
| Specific Hazards Arising from the Chemical |
Has a fire-promoting effect due to the release of oxygen. Ambient fire may liberate hazardous vapours. |
| Surrounding fires | Use water spray or fog for cooling exposed containers |
| Personal precautions, protective equipment and emergency procedures | Equip cleanup crew with proper protection. Ventilate area. |
| Small Spill, Large Spill | NA |
| Personal Protection | Advice for non-emergency personnel: Avoid inhalation of dusts. Evacuate the danger area, observe emergency procedures, consult an expert. Advice for emergency responders: Protective equipment see section 8. |
| Enviromental Precaution | Prevent entry to sewers and public waters. Notify authorities if product enters sewers or public waters |
|
Methods and materials for Containment and cleaning |
Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up carefully. Dispose of properly. Clean up affected area. Avoid generation of dusts. |
| non-emergency personnel | Evacuate unnecessary personnel. |
| . Reference to other sections | See section 8. Exposure controls/personal protection |
| Handling | Wash hands and other exposed areas with mild soap and water before eat, drink or smoke and when leaving work |
| Storage | Keep container tightly closed. Keep container in a cool, well-ventilated area. Sensitive to light. Store in light-resistant containers. Air Sensitive |
| Advice on safe handling | NA |
| Advice on protection against fire and explosion | NA |
| Hygiene measures | NA |
| Precautions | Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the residue under a fume hood. Ground all equipment containing material. Do not ingest. Do not breathe gas/fumes/ vapor/spray. Wear suitable protective clothing. If ingested, seek medical advice immediately and show the container or the label. Avoid contact with skin and eyes. Keep away from incompatibles such as oxidizing agents. |
| Storage conditions | Keep only in the original container in a cool, well ventilated place. Keep container closed when not in use |
| Storage class | Storage class (TRGS 510) 6.1B Non-combustible, acute toxic Cat. 1 and 2 / very toxic hazardous materials |
| Specific end use(s) | Apart from the uses mentioned in section 1.2 no other specific uses are stipulated |
| Provide good ventilation in process area to prevent formation of vapour | Provide good ventilation in process area to prevent formation of vapour |
| Advice on general occupational hygiene | NA. |
| Engineering Control | Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below their respective threshold limit value. Ensure that eyewash stations and safety showers are proximal to the work-station location. |
| Personal Protection | Avoid all unnecessary exposure.. |
| Eye/face protection | Chemical goggles or safety glasses |
| Body Protection | Wear protective gloves |
| Skin protection | NA |
| Respiratory protection | Wear approved mask |
| Other Protection Measure | When using, do not eat, drink or smoke. |
| Control of environmental exposure | Do not let product enter drains. |
Gloves Suit
| Physical state | Solid. |
| ColourPale | Pale yellow crystalline |
| Odour | Characteristic odor |
| Taste | Not available. |
| Molecular Weight | 117,42 g/mol |
| Odor Threshold | Not Applicable |
| pH | Not Applicable |
| Melting Point | 800 °C - (ECHA), (Lit.) |
| Boiling Point | 176 °C |
| Critical Temperature | Not available. |
| Flash Point | 164 °C |
| Evaporation Rate | Not Applicable |
| Flammability (solid, gas) | The product is not flammable. |
| Explosive limits | No Data Available |
| Upper/lower flammability or explosive limits | No data available |
| Autoignition temperature | NA |
| Decomposition temperature | No data available |
| Vapour pressure | No Data Available |
| Density | 1,85 g/cm3 at 25 °C - lit. |
| Vapour Density | NA |
| Volatility | Not available. |
| Odor Threshold | Not available |
| Specific Gravity | 0.895 (Water = 1) |
| Partition coefficient | No data available |
| Explosive properties | None |
| Water Solubility | Slightly soluble in |
| Ignition temperature | No information available. |
| Reactivity | No data available |
| Chemical Stability | Stable under recommended storage conditions. |
| Instability Temperature | Not available. |
| Conditions of Instability | Excess heat |
| Possibility of hazardous reactions | Generates dangerous gases or fumes in contact with Acids A risk of explosion and/or of toxic gas formation exists with the following substancesCarbon dioxide (CO2) Risk of explosion with: magnesium Risk of ignition or formation of inflammable gases or vapours with: Fluorine Violent reactions possible with: Strong oxidizing agents |
| Conditions to avoid | Direct sunlight. Extremely high or low temperatures |
| Incompatibility with various substances | NA |
| Corrosivity | NA |
| Special Remarks on Corrosivity | Not available. |
| Polymerization | NA |
| Hazardous Polymerization | NA |
| Materials to avoid | Strong acids. Strong bases |
| Hazardous decomposition products | Fumes. Carbon monoxide. Carbon dioxide. |
| Routes of Entry | NA |
| Acute toxicity | NA |
| Toxicity to Animals | NA |
| Skin corrosion/irritation | NA |
| Serious eye damage/eye irritation | NA |
| Respiratory or skin sensitization | NA |
| Serious eye damage/eye irritation | NA |
| Rout Of Entry | NA |
| Toxicity to Animal | NA |
| Toxic Effects on Human | NA |
| Germ cell mutagenicity | NA |
| Reproductive toxicity | No data available |
| Specific target organ toxicity - single exposure | No data available |
| Special Remarks on other Toxi Effects on Humans | NA |
| Additional Information | NA |
| Assessment | NA |
| Endocrine disrupting properties | NA |
| Other Toxic Effects on Humans | NA. |
| Persistence and degradability | No data available |
| Toxicity | NA |
| Toxicity to fish | NA |
| Toxicity to daphnia and other aquatic invertebrates | NA |
| Toxicity to algae | NA |
| Eco Toxicity | Not Available |
| COD and BOD 5 | Not Available |
| Products Biodegradation | NA |
| Mobility in soil | No Information available |
| Biodegradability | NA |
| Results of PBT and vPvB assessment | The substance does not fulfil the criteria to be identified as PBT substance or vPvB substance according to Annex XIII of Regulation REACH. |
| Endocrine disrupting properties | NA |
| Assessment | NA |
| Other adverse effects | No data available |
| Environmental precautions | Avoid release to the environment. |
| Product | NA |
| Waste Disposal | NA |
| Waste treatment Method | NA |
| General | Avoid release to the environment. Dispose in a safe manner in accordance with local/national regulations. |
| UN number | NA |
| UN proper shipping name | UN |
| UN proper shipping name | NA |
| Packaging group | NA |
| Packaging group | NA |
| Environmental hazards | NA |
| Federal and State Regulations | NA |
| Safety, health and environmental regulations/legislation specific for the substance or mixture | Ensure all national/local regulations are observed. |
| National legislation | NA. |
| DSCL (EEC) | NA |
|
REACH Restrictions - Annex XVII REACH Authorisation - Annex XIV |
The components of this product are not subject to restrictionThe components of this product are not subject to authorization. |
| Chemical Safety Assessment | Other regulations |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and weassume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |
Availability
P DIMETHYL AMINO CINNAMALDEHYDE AR manufacturers, suppliers, exporters in Mumbai, Gandhidham, Kolkata, Varanasi, Visakhapatnam, Chennai, Fujairah, Dubai, Canada BC, Barka, Sohar, Muscat, Oman.
Lab chemicals manufacturers, suppliers, exporters in India, UAE Middle East, Barka, Sohar, Muscat, Oman, Canada.
P DIMETHYL AMINO CINNAMALDEHYDE AR is available in small packing as well as in bulk. Buy premium quality P DIMETHYL AMINO CINNAMALDEHYDE AR and other lab chemicals from one of the most trusted brands.
