PHENYL MERCURY ACETATE FOR SYNTHESIS
- Part number
- RXSOL-60-6605-224
- Category
- Lab Chemical
- Brand
- RXSOL
Overview
Phenylmercuric acetate is an organomercury compound. This compound was formerly used as a preservative in paints, and as a disinfectant.
Applications
PHENYLMERCURIC acetate (PMA) has been widely used as a fungicide and as a disinfectant. It is well known that the antibacterial action of mercuric compounds results chiefly from their interference with essential sulphydryl groups of organisms.
Dosage and directions
This chemical is used as a fungicide, herbicide and algicide. It is found in antibiotic eye drops, eye cosmetics, shampoos and paints.
Characteristics and notes
as an herbicide and fungicide. as such, is mixed with organic solvent for the purpose of application. Phenylmercury acetate is an arylmercury compound and a member of benzenes.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | PHENYL MERCURY ACETATE FOR SYNTHESIS |
| Part Number | RXSOL-60-6605-224 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Mumbai, Chennai, Vizag , Kolkata, UAE, OMAN and KENYA
| Phone | +91 22 2087 1200 - 1400 |
| Fax | +91 22 2087 1500 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com | |
| Website | www.rxmarine.com |
| Chemical Name | EC-No | CAS number | Formula | Weight % |
| Phenylmercury acetate | 200-532-5 | 62-38-4 | C8H8HgO2 | 100 % |
| Signal Word | Danger |
| Classification according to Regulation (EC) No 1272/2008 | Acute toxicity, Oral (Category 2), H300 Skin corrosion (Sub-category 1B), H314 Serious eye damage (Category 1), H318 Specific target organ toxicity - repeated exposure (Category 1), Kidney, Central nervous system, H372 Short-term (acute) aquatic hazard (Category 1), H400 Long-term (chronic) aquatic hazard (Category 1), H410 |
|
Hazard statement(s) |
H300 Fatal if swallowed. H314 Causes severe skin burns and eye damage. H372 Causes damage to organs (Kidney, Central nervous system) through prolonged or repeated exposure. H410 Very toxic to aquatic life with long lasting effects. |
| Precautionary statement(s) | P260 Do not breathe dust. P273 Avoid release to the environment. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection. P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. P304 + P340 + P310 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER/ doctor. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Supplemental Hazard Statements none |
| Other hazards | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
| General notes | First aiders need to protect themselves. Show this material safety data sheet to the doctor in attendance. |
| If inhaled | After inhalation: fresh air. Call in physician. |
| Skin Contact | First aiders need to protect themselves. Show this material safety data sheet to the doctor in attendance. |
| Eye Contact | Flush thoroughly with water. If irritation occurs, get medical assistance. |
| If inhaled | After inhalation: fresh air. Call in physician.. |
| In case of skin contact | In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower. Call a physician immediately. |
| In case of eye contac | After eye contact: rinse out with plenty of water. Immediately call in ophthalmologist. Remove contact lenses. |
| Notes to Physician | If ingested, material may be aspirated into the lungs and cause chemical pneumonitis. Treat appropriately. |
| If swallowed | If swallowed: give water to drink (two glasses at most). Seek medical advice immediately. In exceptional cases only, if medical care is not available within one hour, induce vomiting (only in persons who are wide awake and fully conscious), administer activated charcoal (20 - 40 g in a 10% slurry) and consult a doctor as quickly as possible. Do not attempt to neutralise |
| The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 | |
| Indication of any immediate medical attention and special treatment needed |
No data available |
| Suitable extinguishing media | Water Foam Carbon dioxide (CO2) Dry powder |
| Unsuitable extinguishing media | For this substance/mixture no limitations of extinguishing agents are given. |
| Special hazards arising from the substance or mixture | Carbon oxides Mercury/mercury oxides. Combustible. Development of hazardous combustion gases or vapours possible in the event of fire |
| Advice for firefighters | Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing. |
| Further information | Suppress (knock down) gases/vapors/mists with a water spray jet. Prevent fire extinguishing water from contaminating surface water or the ground water system. |
| Personal precautions, protective equipment and emergency procedures |
Advice for non-emergency personnel: Avoid generation and inhalation of dusts in all circumstances. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert. For personal protection see section 8
|
| Environmental precautions |
Do not let product enter drains.
|
| Methods and materials for containment and cleaning up |
Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up carefully. Dispose of properly. Clean up affected area. Avoid generation of dusts.
|
| Personal Protection | NA |
| Reference to other sections |
For disposal see section 13.
|
| Handling |
For precautions see section 2.2.
|
| Storage conditions | Tightly closed. Dry. Keep in a well-ventilated place. Keep locked up or in an area accessible only to qualified or authorized persons. Light sensitive. |
| Storage class | Only packagings which are approved (e.g. acc. to ADR) may be used. Storage class (TRGS 510): 6.1A: Combustible, acute toxic Cat. 1 and 2 / very toxic hazardous material |
| Specific end use(s) | Apart from the uses mentioned in section 1.2 no other specific uses are stipulated |
| Eye/face protection |
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Tightly fitting safety goggles
|
| Skin protection This recommendat |
This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de). Full contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested:KCL 741 Dermatril® L This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de). Splash contact Aldrich- P27127 Page 6 of 13 The life science business of Merck operates as MilliporeSigma in the US and Canada Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested:KCL 741 Dermatril® L
|
| Body Protection |
Protective clothing
|
| Respiratory protection |
Required when dusts are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter type: Filter type P3 The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
|
| Control of environmental exposure | If contact is likely, safety glasses with side shields are recommended. |
| Skin and Body Protection |
Do not let product enter drains
|
| Environmental contols |
Comply with applicable environmental regulations limiting discharge to air, water and soil. Protect the environment by applying appropriate control measures to prevent or limit emissions.
|
Suit Gloves
| Physical State | Powder |
| Colour | Beige |
| Odour | No data available |
| Melting point/freezing point | Melting point/range: 148 - 151 °C - lit. |
| Initial boiling point and boiling range | No data available |
| Flammability (solid, gas) | No data available |
| Flash Point | No data available |
| Density (at 15 ºC) | No data available |
| Evaporation Rate | No data available |
| pH | No data available |
| Viscosity | Viscosity, kinematic: No data available Viscosity, dynamic: No data available |
| Water solubility | No data available |
| Partition coefficient:octanol/water | Log Pow: 5 |
| Other safety information | No data available |
| Reactivity | The following applies in general to flammable organic substances and mixtures: in correspondingly fine distribution, when whirled up a dust explosion potential may generally be assumed |
| Chemical stability | The product is chemically stable under standard ambient conditions (room temperature) |
| Possibility of hazardous reactions | Violent reactions possible with: Strong oxidizing agents Strong acids strong reducing agents increased reactivity with: Aluminu |
| Conditions to avoid | No information available |
| Incompatible materials | Aluminum |
| Hazardous decomposition products | In the event of fire: see section 5 |
| Information on toxicological effects Acute toxicity | Acute toxicity estimate Oral - 41 mg/kg (Calculation method) LD50 Oral - Rat - 41 mg/kg Inhalation: No data available Dermal: No data available |
| Skin corrosion/irritation | No data available |
| Serious eye damage/eye irritation | Eyes - Rabbit Result: Severe eye irritation |
| Respiratory or skin sensitization | No data available |
| Germ cell mutagenicity | Test Type: Mouse Test system: lymphocyte Remarks: Other mutation test systems Test Type: Mouse Test system: lymphocyte Remarks: DNA inhibition Test Type: Human Test system: lymphocyte Remarks: Sister chromatid exchange Species: Pig Application Route: Oral Remarks: Cytogenetic analysis |
| Carcinogenicity | No data available |
| Reproductive toxicity | No data available |
| Specific target organ toxicity - single exposure | No data available |
| Specific target organ toxicity - repeated exposure | Causes damage to organs through prolonged or repeated exposure. - Kidney, Central nervous system |
| Aspiration hazard | No data available |
| Lactation | No end point data for material. |
| Single Exposure | NA |
| Assessment | The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. RTECS: OV6475000 Material is extremely destructive to tissue of the mucous membranes and upper respiratory tract, eyes, and skin., spasm, inflammation and edema of the larynx, spasm, inflammation and edema of the bronchi, pneumonitis, pulmonary edema, burning sensation, Cough, wheezing, laryngitis, Shortness of breath, Headache, Nausea, Vomitin. |
| Toxicity | Toxicity to fish LC50 - Oncorhynchus mykiss (rainbow trout) - 0,0090 mg/l - 96,0 h Toxicity to daphnia and other aquatic invertebrates LC50 - Daphnia pulex (Water flea) - 0,005 mg/l - 3 h Toxicity to algae Growth inhibition EC50 - Anabaena flosaquae - 0,006 mg/l - 24 h |
| Persistence and degradability |
No data available
|
| Biodegradation | Bioaccumulation Oncorhynchus mykiss (rainbow trout) - 96 h - 5 µg/l(Phenylmercury acetate) Bioconcentration factor (BCF): 100 |
| Mobility in soil | No data available |
| Results of PBT and vPvB assessmen | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher |
| Atmospheric Oxidation |
NA
|
| Waste treatment method | NA. |
| UN number | ADR/RID: 1674 IMDG: 1674 IATA: 1674 |
| UN proper shipping name |
ADR/RID: PHENYLMERCURIC ACETATE IMDG: PHENYLMERCURIC ACETATE IATA: Phenylmercuric acetate |
| Transport hazard class(es) | ADR/RID: 6.1 IMDG: 6.1 IATA: 6.1 |
| Environmental hazards | ADR/RID: yes IMDG Marine pollutant: yes IATA: no |
| Packaging group | ADR/RID: II IMDG: II IATA: II |
| Special precautions for user | Tunnel restriction code : (D/E) Further information : No data available |
|
This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006.
|
| Authorisations and/or restrictions on use REACH - Restrictions on the manufacture, placing on the market and use of certain dangerous substances, mixtures and articles (Annex XVII) | Phenylmercury acetate |
| National legislation Seveso III: Directive 2012/18/EU of the European Parliament and of the Council on the control of major-accident hazards involving dangerous substances. | ACUTE TOXI |
| Other regulations |
Observe work restrictions regarding maternity protection in accordance to Dir 92/85/EEC or stricter national regulations where applicable. Take note of Dir 94/33/EC on the protection of young people at work
|
| Chemical Safety Assessment | For this product a chemical safety assessment was not carried out |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and weassume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |
Availability
PHENYL MERCURY ACETATE FOR SYNTHESIS manufacturers, suppliers, exporters in Mumbai, Gandhidham, Kolkata, Varanasi, Visakhapatnam, Chennai, Fujairah, Dubai, Canada BC, Barka, Sohar, Muscat, Oman.
Lab chemicals manufacturers, suppliers, exporters in India, UAE Middle East, Barka, Sohar, Muscat, Oman, Canada.
PHENYL MERCURY ACETATE FOR SYNTHESIS is available in small packing as well as in bulk. Buy premium quality PHENYL MERCURY ACETATE FOR SYNTHESIS and other lab chemicals from one of the most trusted brands.
