PHENYL TRIMETHYL AMMONIUM CHLORIDE
- Part number
- RXSOL-60-6605-227
- Category
- Lab Chemical
- Brand
- RXSOL
Overview
Phenyl Trimethyl Ammonium Chloride (138-24-9) is crystalline white. it is also known as Trimethyl phenyl ammonium chloride. it is use in Phenyl Compounds Industry. Storage Keep container tightly closed.
Applications
Phenyltrimethylammonium chloride is an effective phase transfer catalyst, methylating agent, also useful for alkaline depolymerizations, corrosion inhibitor for low carbon steel.
Characteristics and notes
Keep container in a cool, well-ventilated area. Waste Disposal: Waste must be disposed of in accordance with federal, state and local environmental control regulations.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | PHENYL TRIMETHYL AMMONIUM CHLORIDE |
| Part Number | RXSOL-60-6605-227 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Mumbai, Chennai, Vizag , Kolkata, UAE, OMAN and KENYA
| Phone | +91 22 2087 1200 - 1400 |
| Fax | +91 22 2087 1500 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com | |
| Website | www.rxmarine.com |
| Chemical Name | CAS number | EC-No. | Weight %. |
| PHENYL TRIMETHYL AMMONIUM CHLORIDE | 138-24-9 | 205-319-0 | 98% |
| Signal Word | Danger |
| Hazard statement(s) |
H412 Harmful to aquatic life with long lasting effects. H301 + H311 Toxic if swallowed or in contact with skin. |
|
Precautionary statement(s) |
P264 Wash skin thoroughly after handling. P270 Do not eat, drink or smoke when using this product. P280 Wear protective gloves/ protective clothing. P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER/ doctor. P302 + P352 + P312 IF ON SKIN: Wash with plenty of water.Call a POISON CENTER/ doctor if you feel unwell. |
| Supplemental Hazard Statements | None |
| Other hazards | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
| General notes | First aiders need to protect themselves. Show this material safety data sheet to the doctor in attendance. |
| If inhaled | After inhalation: fresh air. |
| In case of eye contact | After eye contact: rinse out with plenty of water. Remove contact lenses... |
| If swallowed | If swallowed: give water to drink (two glasses at most). Seek medical advice immediately. In exceptional cases only, if medical care is not available within one hour, induce vomiting (only in persons who are wide awake and fully conscious), administer activated charcoal (20 - 40 g in a 10% slurry) and consult a doctor as quickly as possible. |
| Most important symptoms and effects, both acute and delayed | The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 |
| Ingestion | Do NOT induce vomiting. Rinse mouth with water (only if the person is conscious) |
| Indication of any immediate medical attention and special treatment needed | No data available |
| Extinguishing media Suitable extinguishing media | Water Foam Carbon dioxide (CO2) Dry powder |
| Unsuitable extinguishing media | For this substance/mixture no limitations of extinguishing agents are given. |
| Special hazards arising from the substance or mixture | Carbon oxides Nitrogen oxides (NOx) Hydrogen chloride gas Combustible. Vapors are heavier than air and may spread along floors. Forms explosive mixtures with air on intense heating. Development of hazardous combustion gases or vapours possible in the event of fire |
| Advice for firefighters | Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing |
| Further information | Suppress (knock down) gases/vapors/mists with a water spray jet. Prevent fire extinguishing water from contaminating surface water or the ground water system. |
| Personal precautions, protective equipment and emergency procedures |
Advice for non-emergency personnel: Avoid generation and inhalation of dusts in all circumstances. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert. For personal protection see section 8.
|
| Environmental precautions |
Do not let product enter drains.
|
| Methods and materials for containment and cleaning up |
LCover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up carefully. Dispose of properly. Clean up affected area. Avoid generation of dusts
|
| Reference to other sections | For disposal see section 13. |
| Precautions for safe handling |
For precautions see section 2.2.
|
| Storage conditions | Tightly closed. Dry. Keep in a well-ventilated place. Keep locked up or in an area accessible only to qualified or authorized persons. |
| Storage class | Storage class (TRGS 510): 6.1C: Combustible, acute toxic Cat.3 / toxic compounds or compounds which causing chronic effects |
| Specific end use(s) | Apart from the uses mentioned in section 1.2 no other specific uses are stipulated |
| Eye/face protection |
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses
|
| Skin protection |
This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de). Full contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested:KCL 741 Dermatril® L This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de). Splash contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested:KCL 741 Dermatril® L
|
| Body Protection |
protective clothing
|
| Respiratory protection |
required when dusts are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter type: Filter type P3 The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
|
| Control of environmental exposure | Do not let product enter drains. |
Gloves Suit
| Physical State | crystalline |
| Color | white |
| Odor | No data available |
| Melting point/freezing point | Melting point/range: 246 - 248 °C - dec |
| Initial boiling point and boiling range | 295 °C at 1.013 hPa |
| Flammability (solid, gas) | No data available |
| Upper/lower flammability or explosive limits | No data available |
| Flash Point | 164 °C - closed cup - ISO 2719 |
| Autoignition temperature | No data available |
| PH | 6,53 at 30 °C |
| Viscosity | Viscosity, kinematic: No data available Viscosity, dynamic: No data available |
| Water solubility | soluble |
| Partition coefficient: n-octanol/water | og Pow: 0,542 at 25 °C - Bioaccumulation is not expected. |
| Vapour pressure | No data available |
| Density | 0,656 g/cm3 at 20 °C - OECD Test Guideline 109 |
| Reactivity | Forms explosive mixtures with air on intense heating. A range from approx. 15 Kelvin below the flash point is to be rated as critical. The following applies in general to flammable organic substances and mixtures: in correspondingly fine distribution, when whirled up a dust explosion potential may generally be assumed. |
| Chemical stability | The product is chemically stable under standard ambient conditions (room temperature) |
| Possibility of hazardous reactions | Violent reactions possible with: strong alkalis |
| Conditions to avoid | Strong heating. |
| Incompatible materials | no information available |
| Acute toxicity | ALD50 Oral - Rat - female - > 50 - 300 mg/kg (OECD Test Guideline 423) Inhalation: No data available Acute toxicity estimate Dermal - 300 mg/kg (Expert judgment) Acute toxicity estimate Dermal - 300 mg/kg (Expert judgment) |
| Skin corrosion/irritation | Skin - In vitro study Result: No irritation (OECD Test Guideline 439) Skin - Rat Result: No skin irritation (OECD Test Guideline 402) |
| Serious eye damage/eye irritation | Eyes - Rabbit Result: No eye irritation Remarks: (ECHA) |
| Respiratory or skin sensitization | No data available |
| Germ cell mutagenicit | No data available Test Type: Ames test Test system: Salmonella typhimurium Metabolic activation: with and without metabolic activation Method: OECD Test Guideline 471 Result: negative |
| Sensitisation | No end point data for material. |
| Skin Sensitization | Data available. |
| Aspiration | Data available. |
| Germ Cell Mutagenicity | Data available. |
| Carcinogenicity | Data available. |
| Lactation | No end point data for material. |
| Single Exposure | NA |
| Assessment | The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. |
| Toxicity to fish | Static test LC50 - Danio rerio (zebra fish) - > 100 mg/l - 96 h (OECD Test Guideline 203) |
| Toxicity to daphnia and other aquatic invertebrates |
Static test EC50 - Daphnia magna (Water flea) - 44 mg/l - 72 h (OECD Test Guideline 202)
|
| Toxicity to alga | Static test ErC50 - Desmodesmus subspicatus (green algae) - 152,1 mg/l - 72 h (OECD Test Guideline 201) |
| Persistence and degradability | Biodegradability Result: 53,73 % - Inherently biodegradable. (OECD Test Guideline 301D) |
| Results of PBT and vPvB assessmen | His substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
| Other adverse effects |
We have no quantitative data concerning the ecological effects of this product. Further information on ecology Discharge into the environment must be avoided
|
| Waste treatment method | No data available |
| UN number | ADR/RID: 2811 IMDG: 2811 IATA: 2811 |
| UN proper shipping name |
ADR/RID: TOXIC SOLID, ORGANIC, N.O.S. (N,N,N-trimethylanilinium chloride) IMDG: TOXIC SOLID, ORGANIC, N.O.S. (N,N,N-trimethylanilinium chloride) IATA: Toxic solid, organic, n.o.s. (N,N,N-trimethylanilinium chloride) |
| Transport hazard class(es) | ADR/RID: 6.1 IMDG: 6.1 IATA: 6.1 |
| Packaging group | ADR/RID: III IMDG: III IATA: III |
| Environmental hazards |
ADR/RID: No IMDG Marine pollutant: No IATA: No |
| Safety, health and environmental regulations/legislation specific for the substance or mixture | This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006 |
| Other regulations | Observe work restrictions regarding maternity protection in accordance to Dir 92/85/EEC or stricter national regulations where applicable Observe work restrictions regarding maternity protection in accordance to Dir 92/85/EEC or stricter national regulations where applicable |
| Chemical Safety Assessment |
For this product a chemical safety assessment was not carried out
|
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and weassume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |
