PHTHALIC ACID FOR SYNTHESIS
- Part number
- RXSOL-60-6605-239
- Category
- Lab Chemical
- Brand
- RXSOL
Overview
Phthalic acid is used mainly in the form of anhydride to produce other chemicals such as dyes, perfumes, saccharin, phthalates, and many other useful products. Plasticizers such as phthalic acid esters (phthalates) are used in a wide range of consumer goods, commodities, and construction materials.
Applications
Phthalic acid is produced by the catalytic oxidation of naphthalene or ortho-xylene directly to phthalic anhydride and a subsequent hydrolysis of the anhydride. Phthalic acid was first obtained by French chemist Auguste Laurent in 1836 by oxidizing naphthalene tetrachloride.
Dosage and directions
Phthalates (esters of phthalic acid) are a group of chemicals with a wide variety of industrial applications. Regarding cosmetics, they are used as plasticizers in products such as nail polishes and hair sprays, and as solvents and perfume fixatives in many other products.
Characteristics and notes
Phthalic anhydride is widely used worldwide for an extremely broad range of applications spanning from the plastics industry to the synthesis of resins, agricultural fungicides and amines.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | PHTHALIC ACID FOR SYNTHESIS |
| Part Number | RXSOL-60-6605-239 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Mumbai, Chennai, Vizag , Kolkata, UAE, OMAN and KENYA
| Phone | +91 22 2087 1200 - 1400 |
| Fax | +91 22 2087 1500 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com | |
| Website | www.rxmarine.com |
| Chemical Name | CAS number | EC.NO. | Weight % |
| PHTHALIC ACID FOR SYNTHESIS | 88-99-3 | 201-873-2 | 100 % |
| Signal Word | Signal Word |
| Classification of the substance or mixture | Classification according to Regulation (EC) No 1272/2008 Skin irritation (Category 2), H315 Eye irritation (Category 2), H319 Specific target organ toxicity - single exposure (Category 3), Respiratory system, H335 For the full text of the H-Statements mentioned in this Section, see Section 16 |
| Label elements | Labelling according Regulation (EC) No 1272/2008 Pictogram |
| Hazard statement | H315 Causes skin irritation. H319 Causes serious eye irritation. H335 May cause respiratory irritation. |
| Precautionary statement(s) | P261 Avoid breathing dust/ fume/ gas/ mist/ vapors/ spray. P264 Wash skin thoroughly after handling. P271 Use only outdoors or in a well-ventilated area. P280 Wear protective gloves/ eye protection/ face protection. P302 + P352 IF ON SKIN: Wash with plenty of water. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing |
| Supplemental Hazard Statements | NONE |
| Other hazards | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or highe |
| General advice | Show this material safety data sheet to the doctor in attendance. |
| If inhaled | After inhalation: fresh air. |
| In case of eye contact | In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower. |
| Eye Contact | After eye contact: rinse out with plenty of water. Call in ophthalmologist. Remove contact lenses. |
| If swallowed | After eye contact: rinse out with plenty of water. Call in ophthalmologist. Remove contact lenses.ll. |
| Most important symptoms and effects, both acute and delayed | The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 |
| Indication of any immediate medical attention and special treatment needed | No data available |
| Suitable extinguishing media | Water Foam Carbon dioxide (CO2) Dry powder |
| Unsuitable extinguishing media | For this substance/mixture no limitations of extinguishing agents are given. |
| Special hazards arising from the substance or mixture | Carbon oxides Combustible. Development of hazardous combustion gases or vapours possible in the event of fire. |
| Advice for firefighters | Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing. |
| Further information | Prevent fire extinguishing water from contaminating surface water or the ground water system. |
| Personal precautions, protective equipment and emergency procedures |
Advice for non-emergency personnel: Avoid inhalation of dusts. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.For personal protection see section 8.
|
| Environmental precautions |
Do not let product enter drains.
|
| Methods and materials for containment and cleaning up |
Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up dry. Dispose of properly. Clean up affected area. Avoid generation of dusts.
|
| Reference to other sections | For disposal see section 13. |
| Precautions for safe handling |
For precautions see section 2.2.
|
| Conditions for safe storage, including any incompatibilities Storage conditions | Tightly closed. Dry. Recommended storage temperature see product label. |
| Storage class | Storage class (TRGS 510): 13: Non Combustible Solids |
| Specific end use(s) | Apart from the uses mentioned in section 1.2 no other specific uses are stipulated |
| Control parameters |
Ingredients with workplace control parameters
|
| Exposure controls |
Personal protective equipment
|
| Eye/face protection |
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses
|
| Skin protection |
This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please
|
| Respiratory protection | required when dusts are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter type: Filter type P1 The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented. |
| Control of environmental exposur |
Do not let product enter drains
|
| Body Protection | protective clothing |
Gloves Suit
| Physical State | solid |
| Colour | colorless |
| Odour | No data available |
| Melting point/freezing point | Melting point/range: 210 °C |
| Initial boiling point and boiling range | No data available |
| Flammability (solid, gas) | No data available. |
| Upper/lower flammability or explosive limits | No data available |
| Flash point | No data available |
| Autoignition temperature | No data available |
| Decomposition temperature | No data available |
| pH | No data available |
| Viscosity |
Viscosity, kinematic: No data available Viscosity, dynamic: No data available |
| Water solubility | No data available |
| Partition coefficient: n-octanol/water | No data available |
| Vapor pressure | No data available |
| Bulk density | Ca.960 kg/m3 |
| Relative density | No data available |
| Relative vapor density | No data available |
| Reactivity | Forms explosive mixtures with air on intense heating. A range from approx. 15 Kelvin below the flash point is to be rated as critical. The following applies in general to flammable organic substances and mixtures: in correspondingly fine distribution, when whirled up a dust explosion potential may generally be assumed. |
| Chemical stability | The product is chemically stable under standard ambient conditions (room temperature) . |
| Possibility of hazardous reactions | Violent reactions possible with: Strong oxidizing agents Strong acids |
| Conditions to avoid | Strong heating. |
| Incompatible materials | No data available |
| 6 Hazardous decomposition products | In the event of fire: see section 5 |
| Acute toxicity | LD50 Oral - Rat - male - > 5.000 mg/kg (OECD Test Guideline 401) Inhalation: No data available Dermal: No data available |
| Skin corrosion/irritation | Skin - Rabbit Result: No skin irritation - 24 h |
| Serious eye damage/eye irritation | Eyes - Rabbit Result: No eye irritation (OECD Test Guideline 405) |
| Respiratory or skin sensitization | in vivo assay - Mouse Result: Does not cause skin sensitization. (OECD Test Guideline 429) |
| Germ cell mutagenicity | Test Type: Ames test Test system: S. typhimurium Metabolic activation: with and without metabolic activation Method: OECD Test Guideline 471 Result: negative |
| Carcinogenicity | No data available |
| Reproductive toxicity | Overexposure may cause reproductive disorder(s) based on tests with laboratory animals |
| Specific target organ toxicity - single exposure | No data available |
| Specific target organ toxicity - repeated exposure | Data available. |
| Aspiration hazard | Data available. |
| Assessment | The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated |
| Toxicity | No data available |
| Persistence and degradability |
No data available
|
| Bioaccumulative potential | No data available |
| Mobility in soil | No data available |
| Results of PBT and vPvB assessment | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher |
| Endocrine disrupting properties | No data available |
| No data available | Biological effects: Harmful effect due to pH shift. Discharge into the environment must be avoided. No data available |
| Assessmen |
The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher.
|
| Other adverse effects | No data available |
| Waste treatment method | See www.retrologistik.com for processes regarding the return of chemicals and containers, or contact us there if you have further questions. |
| UN number |
ADR/RID: - IMDG: - IATA: - |
| UN proper shipping name |
ADR/RID: Not dangerous goods IMDG: Not dangerous goods IATA: Not dangerous goods |
| Transport hazard class(es) |
ADR/RID: - IMDG: - IATA: - |
| Packaging group |
ADR/RID: -
IMDG: -
ATA: -
|
| Environmental hazards |
ADR/RID: No IMDG Marine pollutant: No IATA:No |
| Special precautions for user | No data available |
| Further information | Not classified as dangerous in the meaning of transport regulations. |
| Safety, health and environmental regulations/legislation specific for the substance or mixture | This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006 |
| Other regulations | Take note of Dir 94/33/EC on the protection of young people at work. |
| Chemical Safety Assessment | For this product a chemical safety assessment was not carried out |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and weassume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |
|
0,37 g/l at 25 °C |
| 88-99-3 |
| 88-99-3 |
| 88-99-3 |
