Passivate -1 SS Cleaner
- Part number
- RXSOL-68-6806-005
- Category
- Passivation
- Brand
- RXSOL
Overview
Superficial rust, oil, grease and lime deposits can occasionally appear on any stainless steel surface. Cleaning with Rxsol Passivate 1 eliminates these spots with ease, restoring the surface and returning your stainless steel to its original lustrous look, feel and finish.
Technical specifications
|
Appearance |
: |
Transparent Liquid |
|
Odour |
: |
Slight smell |
|
Boiling point |
: |
80-100oC |
|
Flash point / Explosion properties |
: |
Not applicable |
|
Specific temperatures |
: |
Solid-fluid 0oC, Fluid-gas 80-100oC |
|
Vapour pressure at 20oC |
: |
< 0.01 kPa |
|
pH |
: |
0,6 at 20oC |
|
Density |
: |
1.1 g/cm3 at 20oC |
|
Solubility in water at 20oC |
: |
100 weight % |
Applications
Rxsol Passivate 1 is intended for a wide range of industrial cleaning applications, it offers a good general cleaning result on stainless steel surfaces.
Dosage and directions
RXSOL Passivate 1 can be used in combination with Passivation Spray , which helps to remove free iron from the surface and regenerate the protective layer in the stainless steel by speeding up the passivation process.
1. Apply the Cleaner with a brush or by spraying or dipping.
2. When spraying, use an acid-resistant pump.
3. Leave the fluid to work 15 to 30 min at room temperature.
4. Rinse thoroughly with a high-pressure water jet. Treat the waste water before discharge
Characteristics and notes
Features & Benefit :
- Restores and brightens stainless steel surfaces that have been contaminated during fabrication or usage. It removes surface rust, water staining and lime deposits and organic contamination such as oil and grease.
- Pre-cleans before pickling. It removes organic contaminants such as grease, oil, etc. which will inhibit pickling.
-
Removes atmospheric staining caused by sea water, “teastaining”, rain water, “water scale” and road salt.
Storage:
Rxsol Passivate 1 should be stored indoors at room temperature. Containers must be kept properly closed, in an upright position and inaccessible to unauthorised persons. The products are perishable and should not be kept in storage longer than necessary. They have a maximum shelf life of two years when stored at room temperature. Exposure to higher temperatures may reduce shelf life
Handling :
Protective clothing. In general users should wear acid-resistant overalls, gloves and rubber boots. Face visor should be used and, if necessary, suitable respiratory protective devices. Special conditions may apply from one country to another. Refer our Material Safety Data Sheets.
Packing : 5 Kgs, 10 Kgs, 230 Kgs.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | Passivate - 1 |
| Product Type | RXSOL-68-6806-005 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
PREPARATION:
Chemical identity:
Colourless acid solution with corrosive properties.
INFORMATION ON IGREDIENTS:
| CLASIFICATION ACCORDING TO REGULATION 67/548/EEG OR 1999/45/EG |
|
Hazardous components, chemical name, formula |
CAS No. | EC No. |
Contents weight-% |
Hazard symbol/ Risk phrase* |
| Phosphoric acid , H3PO4 | 7 6 6 4 - 3 8 - 2 | 231-633-2 | 16 | C, R34 |
|
Alcohols, C11-14-iso-, C13-rich, ethoxylated |
78330-21-9 | - | 3-5 |
Xn, R22, 41 |
| CLASIFICATION ACCORDING TO REGULATION (EG) no 1272/2008 |
|
Hazardous components, chemical name, formula |
CAS No. | EC No. |
Contents weight-% |
Hazard category |
Hazard statements cod |
| Phosphoric acid , H3PO4 | 7 6 6 4 - 3 8 - 2 | 231-633-2 | 16 |
1 1B |
H290 H314 |
|
Alcohols, C11-14-iso-, C13-rich, ethoxylated |
78330-21-9 | - | 3-5 |
1 4 |
H318 H302 |
*The full texts of the phrases are shown in section 16.
Additional information Classification according to directive 67/548/EEC.
Symbols and risk phrases are for concentrated substances.
CLASSIFICATION:
| Health hazard in case of accidental exposure (R-phrases): | The product is classified as corrosive. Risk for injuries on skin and mucous membranes. |
| Environmental effects: | Will reduce pH in water. Must be neutralised. See also section 12. |
| Physical and chemical risks: | When heated phosphorus gases and hydrogen can be emitted. |
|
LABEL ELEMENTS Hazard symbols: |
Corrosive |
| Risk phrases: | R 34 |
| Safety phrases: |
S 1/2 S 26 S 28 S 36/37/39 S 45 |
| OTHER HAZARDS | Not known |
DESCRIPTION OF FIRST AID MEASURES AND INDICATION OF INMEDIATE AND SPECIAL TREATMENT NEEDED:
| Inhalation: | Remove to fresh air. Keep victim lying down, quiet and warm. Rinse nose and mouth with water. Might require assistance with breathing. Seek medical care even if only slight discomfort occurs. |
| Ingestion: | Drink at once milk or water. Seek medical care. |
| Skin contact: | Rinse immediately with plenty of water, seek medical care. |
| Eye contact: | Protect intact eye. Rinse immediately with plenty of water for at least 15 minutes and seek immediate medical care (eye specialist). Keep rinsing during transport. |
| SYMPTOMS ACUTE AND DELAYED | Not known |
| EXTINGUISHING MEDIA | The most appropriate media to extinguish surrounding fire is depending on what is burning. |
|
SPECIAL HAZARDS ARISING FROM THE MIXTURE Chemical exposure risks caused by released gases/vapours: |
The Pickling Fluid will emit toxic fumes and phosphoric oxides when exposed to heat/fire. |
|
ADVICE FOR FIREFIGHTERS: Danger of fire/explosion: |
Fluid is non-flammable. Bottles close to fire should be removed or cooled with water. |
| Protective clothing for firemen: | Appropriate protective acid-resistant clothing should be used. |
| Breathing protection: | Gas mask with filter according to CEN (Central European Norms). |
| How to clean or destroy soiled fire equipment: | Thoroughly wash with water. |
| Personal precautions: | Avoid direct contact. If there is still a risk of direct contact or stench protect with some form of acid-resistant material. Wear eye protection, skin protection, rubber gloves and breathing apparatus. Keep working area well ventilated. |
|
ENVIRONMENTAL PRECAUTIONS: Spillage (water, air, soil): |
Prevent spillage from entering sewage or public waters or nature. |
|
METHODS AND MATERIAL FOR CONTAINMENT AND CLEANING UP: Methods for cleaning up: |
Neutralise with Avesta Neutralising Agent or a strong alkaline compound i.e. slaked lime.Embank with sand. Arrange for pick up. Rinse with plenty of water. Spillage should be picked up and disposed of in full compliance with federal, state and local regulations as acid waste. |
| REFERENCE TO OTHER SECTIONS | Handling and storage section 7, exposure control/personal protection section 8 and disposal considerations section 13. |
PRECAUTIONS FOR SAFE HANDLING:
| Technical measures: | Working place and methods should be worked out in order to avoid direct contact. Work and storage area should be well ventilated. A closed rinse water system with filtration and reuse of clear water is recommended. |
| To prevent fire and explosion: | Bottles close to fire should be removed or cooled with water. |
| Precautions: |
Avoid fume generation and accumulation by using in a well-ventilated area. Use in areas having local exhaust and general ventilation. Emergency eyewash and safety shower must be available at the working place. |
CONDITIONS FOR SAFE STORAGE, INCLUDING ANY INCOMPATIBILITIES:
| Technical measures: | Storage room should be kept separate, cool, dry, well ventilated and closed to unauthorised persons. |
| Incompatible products: | Not applicable. |
| Storage conditions: | Keep containers securely closed when not in use and in an upright position. Store in areas where temperature remains between 0-30 oC at all times. |
| Packaging materials: | Package must be of acid resistant plastic material. |
| SPECIFIC END USES | See section 1. Contact the manufacturer for more information. |
CONTROL PARAMETERS:
Phosphoric acid:
EU: IOEL 1,0 mg/m3 (8 hr), 2,0 mg/m3 (15 min)
EXPOSURE CONTROLS:
| Respiratory protection: | Gas mask with a filter according to CEN (Central European Norms) |
| Hand protection: | Acid resistant rubber gloves, i.e. Butyl and Nitrile rubber. |
| Eye protection: | Face shield. |
| Skin and body protection: | Rubber boots and acid resistant clothes, which covers all body parts exposed to splashes. |
| Specific hygienic measures: | Do not inhale fumes, avoid contact with eyes, skin and clothes. It is not allowed to eat, drink and smoke at workplace. |
| Environmental exposure controls: | See section 6 and 7. |
INFORMATION ON BASIC PHYSICAL AND CHEMICAL PROPERTIES:
| Physical state (form, colour, smell) at 20oC: | Transparent liquid with a slight smell. |
| Boiling point: | 80-100oC |
| Flash point / Explosion properties: | Not applicable |
| Specific temperatures: | Solid-fluid 0oC, Fluid-gas 80-100oC |
| Vapour pressure at 20oC: | < 0.01 kPa |
| pH: | 0,6 at 20oC |
| Density: | 1.1 g/cm3 at 20oC |
| Solubility in water at 20oC: | 100 weight % |
| REACTIVITY | Reacts vigorously with alkaline substances |
| CHEMICAL STABILITY | Stable under normal conditions. |
| POSSIBILITY OF HAZARDOUS REACTIONS | Polymerization will not occur |
| CONDITIONS TO AVOID | Avoid high temperatures, must not be exposed to direct sunshine. When heated, phosphoric gases will be emitted. |
| INCOMPATIBLE MATERIALS | Contact with alkaline compounds causes a heavy exothermic reaction with heat development. |
| HAZARDOUS DECOMPOSITION PRODUCTS | Will emit phosphoric gases and hydrogen gas. |
INFORMATION ON TOXICOLOGICAL EFFECTS:
| Acute toxicity | LD50 rat oral 1530 mg/kg (Phosphoric acid) |
| Effects on the skin: | Will irritate, burn and may cause wounds. |
| Effects on the eyes: | Fumes may cause irritation. Splashes can cause serious damage to the eye. |
| After ingestion: | May cause damage to mucous membranes, pain, vomiting and diarrhoea. |
| Upon inhalation | Inhalation of fumes or mist might cause aches, cough and difficulty in breathing. Risk for pulmonary oedema. |
OTHER RELEVANT INFORMATION:
CMR-effects:
Not known
| PERSISTENCE AND DEGRADABILITY | No data |
| BIOACCUMULATIVE POTENTIAL | The product is not regarded as bioaccumulative. |
| MOBILITY IN SOIL | The product can hike down to the groundwater. |
| RESULTS OF PBTAND vPvB ASSESSMENT | Non-current |
| OTHER ADVERSE EFFECTS | The product is soluble in water and in its concentrated form will lower the pH of ground water. |
WASTE TREATMENT METHODS:
| Methods of disposal the product: |
Discarded product and related waste is hazardous waste. Alloting of EWC-code should be made on the basis of the source causing the waste. Suggested EWC-code is 11 01 05* Pickling acids. |
| Waste from residues: | Contaminated residues i.e. wastewater must be neutralised and heavy metals from the process should be removed and these constitute hazardous waste. |
| Contaminated packing: | Rinse with plenty of water. |
| Additional information: | Effluent must be separated and disposed of as acidic waste. A filtration system for rinse water is recommended. Consult with your local authorized and licensed waste disposal agency and ministry of environment for instructions and procedures for approved waste disposal. |
| UN-Classification No: | 3264 |
| UN PROPPER SHIPPING NAME | CORROSIVE LIQUID, ACIDIC, INORGANIC N.O.S. (phosphoric acid) |
TRANSPORT HAZARD CLASS(ES):
| Classification Code: | C1 |
| PACKING GROUP | III |
| IMDG (Sea): |
Class 8 EmS F-A, S-B Marine Pollutant: No |
| ADR/RID (road, rail): |
Class 8 Tunnel restriction code: (E) |
|
IATA/DGR (air): |
Class 8 |
| ADDITIONAL INFORMATION | The product is to be transported according to dangerous goods regulations. |
SAFETY, HEALTH AND ENVIRONMENTAL REGULATIONS
Regulations:
1907/2006/EC, 1272/2008/EC Table 3.1, 67/648/EEC, EWC 2000/532/EC
Other regulations:
IMDG
ADR/RID
IATA/DGR
Chemical Safety Assessment:
Has not been carried out for this product (or substances in the preparation).
The information provided about the product on this Safety Data Sheet has been compiled from knowledge of the individual constituents The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product in terms of safety requirements and does not signify any warranty with regard to the product's properties The data given here only applies when product used for proper application(s). The product is not sold as suitable for other applications usage in such may cause risks not mentioned in this sheet. Do not use for other application(s) without seeking advice from manufacturer.
Availability
Passivate - 1 SS Cleaner manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Passivate - 1 SS Cleaner at a competitive price from us. We have ready stock of Passivate - 1 SS Cleaner in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
