Petroleum Jelly
- Part number
- RXSOL-25-1746-025
- Category
- House / HOTEL & CATERING
- Brand
- RXSOL
Overview
Petroleum Jelly is a semi-solid hydrocarbon mixture derived from purified mineral oils and waxes. It is widely used in industrial, pharmaceutical, and cosmetic formulations as a base material. The product is chemically stable, non-reactive, and highly refined. It provides excellent lubricating and sealing properties. Packaged in bulk for multipurpose applications across industries.
Technical specifications
| CHARACTERISTICS | : | SPECIFICATION |
| Description | : | A White Translucent Unctuous Mass, Slightly Fluorescent in daylight when melted, odourless, when wubbed on the skin |
| Solubility | : | Slightly soluble in Methylene Chloride, insoluble in Water, Ethanol (96%) & Glycerol |
| Drop Point Deg.C | : | 40 – 60 |
| Consistency Dmm | : | 100-300 |
| Infrared Absorption of A 0.05 % W/V solution In 2,2,4 – trimethylpentane, at about 290 Nm | : | As per specification |
| Acidity or Alkalinity | : | As per specification |
| Polycyclic Aromatic Hydrocarbons | : | As per specification |
| Sulphated Ash,% | : |
0.05 Maximum |
Applications
This product is used in Industries like,
- Cosmetics
- Drugs & Pharmaceuticals
- Food Processing and Handling
Dosage and directions
White translucent soft mass, Unctuous to touch, Odorless and tasteless not more than slightly fluorescent by daylight when melted.
PERFORMANCE STANDARDS
- Jelly resists change in its structure without sweating under normal Operating conditions.
- Essentially Meets IP/BP/USP Standard
Characteristics and notes
KEY BENEFIT :
It exhibits very good lubricity properties, moisture loss resistance to lotions, creams, ointments etc and isused as a vehicle in ointments & other formulations in pharmaceutical / cosmetic industry. Our Petroleum Jellies are stable to light & oxidation and keeps good structure during processing. This product is treated for harmful polycyclic aromatic impurities and it passes the Polycyclic. Aromatic Hydrocarbon test along with other purity norms in the Pharmacopoeia and complies to all the Regulatory requirements as per the European commission.
- Highly refined, stable hydrocarbon mixture
- Safe, non-hazardous, and easy to handle
- Multi-industry applications (pharma, cosmetics, industrial)
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | Petroleum Jelly |
| Part Number | RXSOL-25-1746-025 |
Company Details:....
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA
| Phone | +91 22 20871200 - 1400 |
| Fax | +91 22 27612100 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com | |
| Website | www.rxmraine.com |
Substances
| Synonyms | Petrolatum |
| CAS-No | 8009-03-8 |
| EC-No. | 232-373-2 |
No components need to be disclosed according to the applicable regulations.
| Classification of the substance or mixture | Not a hazardous substance or mixture according to Regulation (EC) No 1272/2008. |
| Label elements | Not a hazardous substance or mixture according to Regulation (EC) No 1272/2008 |
| Other hazards | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
| Description of first aid measures | No data available |
| Most important symptoms and effects, both acute and delayed | The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 |
| Indication of any immediate medical attention and special treatment needed | No data available |
| Extinguishing media | No data available |
| Special hazards arising from the substance or mixture |
Highly flammable liquid and vapor. Runoff to sewer may create fire or explosion hazard.
In a fire or if heated, a pressure increase will occur and the container may burst, with the
risk of a subsequent explosion. The vapor/gas is heavier than air and will spread along
the ground. Vapors may accumulate in low or confined areas or travel a considerable
distance to a source of ignition and flash back.
Highly flammable liquid and vapor. Runoff to sewer may create fire or explosion hazard.
In a fire or if heated, a pressure increase will occur and the container may burst, with the
risk of a subsequent explosion. The vapor/gas is heavier than air and will spread along
the ground. Vapors may accumulate in low or confined areas or travel a considerable
distance to a source of ignition and flash back.
Highly flammable liquid and vapor. Runoff to sewer may create fire or explosion hazard.
In a fire or if heated, a pressure increase will occur and the container may burst, with the
risk of a subsequent explosion. The vapor/gas is heavier than air and will spread along
the ground. Vapors may accumulate in low or confined areas or travel a considerable
distance to a source of ignition and flash back.
Nature of decomposition products not known.
|
| Advice for firefighters | No data available |
| Further information |
No data available
spray to keep fire-exposed containers cool.Promptly isolate the scene by removing all persons from the vicinity of the incident if
there is a fire. No action shall be taken involving any personal risk or without suitable
training. Move containers from fire area if this can be done without risk. Use water
spray to keep fire-exposed containers cool.
|
| Personal precautions, protective equipment and emergency procedures |
Use non-slip safety shoes in areas where spills or leaks can occur.
For personal protection see section 8.
|
| Environmental precautions | No data available |
| Methods and materials for containment and cleaning up | Keep in suitable, closed containers for disposal. Clean thoroughly. |
| Reference to other sections | For disposal see section 13. |
| Precautions for safe handling | For precautions see section 2.2. |
| Conditions for safe storage, including any incompatibilities |
No data available
Recommended storage temperature see product label.Tightly closed.
Recommended storage temperature see product label.
|
| Specific end use(s) | Apart from the uses mentioned in section 1.2 no other specific uses are stipulated |
Control parameters
| Skin protection |
Handle with gloves. Gloves must be inspected prior to use. Use proper glove
removal technique (without touching glove's outer surface) to avoid skin contact
with this product. Dispose of contaminated gloves after use in accordance with
applicable laws and good laboratory practices. Wash and dry hands.
The selected protective gloves have to satisfy the specifications of Regulation (EU)
2016/425 and the standard EN 374 derived from it.
Full contact
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min
Material tested:Dermatril® (KCL 740 / Aldrich Z677272, Size M)
Splash contact
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min
Material tested:Dermatril® (KCL 740 / Aldrich Z677272, Size M)
data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 87300, e-mail
sales@kcl.de, test method: EN374
If used in solution, or mixed with other substances, and under conditions which
differ from EN 374, contact the supplier of the EC approved gloves. This
recommendation is advisory only and must be evaluated by an industrial hygienist
and safety officer familiar with the specific situation of anticipated use by our
customers. It should not be construed as offering an approval for any specific use
scenario.
|
| Control of environmental exposure | Prevent product from entering drains. |
Information on basic physical and chemical properties
| Physical state | Paste |
| Color | Colorless |
| Odor | No data available |
| Melting point/freezing point | Melting point/range: 51 - 71 °C at 1.013 hPa |
| Initial boiling point and boiling range | 360 - 732 °C at 1.013 hPa |
| Flammability (solid, gas) | No data available |
| Upper/lower flammability or explosive limits | No data available |
| Flash point | 180 - 256 °C |
| Autoignition temperature | No data available |
| Decomposition temperature |
No data available
materials.Extremely flammable in the presence of the following materials or conditions: oxidizing
materials.
|
| pH |
No data available |
| Viscosity |
Viscosity, kinematic: 3 - 30 mm2/s at 100 °C
Viscosity, dynamic: No data available
|
| Water solubility | Insoluble |
| Partition coefficient: n-octanol/water | No data available |
| Vapor pressure | < 0,2 hPa at 80 °C |
| Density | 0,865 - 0,886 g/cm3 at 15 °C |
| Relative density | No data available |
| Relative vapor density | No data available |
| Particle characteristics | No data available |
| Explosive properties | No data available |
| Oxidizing properties | No data available |
| Other safety information | |
| Bulk density | 722 g/l |
| Reactivity | No data available |
| Chemical stability | No data available |
| Possibility of hazardous reactions | No data available |
| Conditions to avoid | No data available |
| Incompatible materials |
Oxidizing agents
|
| Hazardous decomposition products | In the event of fire: see section 5 |
Information on toxicological effects
| Acute toxicity |
Oral: No data available
Inhalation: No data available
Dermal: No data available
LD50 Intraperitoneal - Mouse - > 50.000 mg/kg
|
| Skin corrosion/irritation | Remarks: No data available |
| Serious eye damage/eye irritation | Remarks: No data available |
| Respiratory or skin sensitization | No data available |
| Germ cell mutagenicity | No data available |
| Carcinogenicity |
No data available
|
| Reproductive toxicity | No data available |
| Specific target organ toxicity - single exposure | No data available |
| Specific target organ toxicity - repeated exposure | No data available |
| Aspiration hazard | No data available |
| Toxicity | No data available |
| Persistence and degradability | No data available |
| Bioaccumulative potential | No data available |
| Mobility in soil | No data available |
| Results of PBT and vPvB assessment | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
|
Endocrine disrupting properties
Product
|
|
| Assessment |
The substance/mixture does not contain components
considered to have endocrine disrupting properties
according to REACH Article 57(f) or Commission
Delegated regulation (EU) 2017/2100 or Commission
Regulation (EU) 2018/605 at levels of 0.1% or higher.
|
| Other adverse effects | No data available . |
| Waste treatment Method | No data available |
| UN number | ADR/RID: IMDG: IATA: |
| UN proper shipping name |
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
|
| Transport hazard class(es) | ADR/RID: IMDG: IATA: |
| Packaging group | ADR/RID: IMDG: IATA: |
| Environmental hazards | ADR/RID: No IMDG: No IATA: No |
| Special precautions for user | No data available |
| Further information | Not classified as dangerous in the meaning of transport regulations. |
| Safety, health and environmental regulations/legislation specific for the substance or mixture | This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006. |
| Chemical Safety Assessment | For this product a chemical safety assessment was not carried out |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and weassume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |
