RXSOL CHEMO PHARMA International Navi Mumbai, India

Products

7,061 products across 71 categories for marine, industrial, water treatment and laboratory use.

Browse all products Product catalogue

Floor Care (Polish / Cleaner )

Polish Preparation For Metal SL

Application Metal Polish Preparation
Part number
RXSOL-13-1912-0253
Brand
RXSOL
RXSOL

Safety and SDS

Read the safety data sheet before handling. Wear suitable gloves and eye protection.

View safety data sheet
Product Name Polish Preparation For Metal SL
   

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA 

Branch : Kandla, Mumbai, Chennai, Vizag, Kolkata, UAE, OMAN, Nairobi

Phone +91 22 65113333 / 5555 / 9999
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email rxsolchemicals@gmail.com
Component  CAS Number Percent Comp. Dimension
 
Polydimethyl Siloxane 63148-62-9

 60%

W/W
Proprietory mixture - 40% w/w

Generally non hazardous in normal handling, however good laboratory practices should always be used.Avoid long term exposure to skin or by inhalation.

Generally not hazardous in normal handling, however good laboratory practices should always be used. Avoid long term exposure to skin or by inhalation.

SKIN:

Wash exposed area with soap and water. If irritation persists, seek medical attention
EYES: Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. If symptoms persist, seek medical aid
INHALATION: Remove to fresh air. If not breathing, give artificial respiration. Seek medical attention.If large amounts are swallowed give water to drink and seek medical aid.

Fire Extinguisher Type:

for large fires use carbon dioxide, dry chemical powder or water spray. On small fires use carbon dioxide, drychemical or water spray.
Fire / Explosion Hazards: None Known.
Fire Fighting Procedure: Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and clothing.

Absorb spill with inert material. Dilute excess with water and flush down drain.

Store in a cool dry place. This material is not considered hazardous. Use normal safe laboratory

Respiratory Protection

No special protection required
Ventilation
 
 Local
 
OTHER Mechanical
 
Protective Gloves Gloves to prevent exposure
EYE PROTECTION Splash Goggles -satety glasses as a minimum.
Other Protective Equipment Wear appropriate clothing to prevent skin exposure
BOILING POINT 312°F
VAPOR PRESSURE  Not available
MELTING POINT 30°F
VAPOR DENSITY  Not available
EVAPORATION RATE <1
Appearance /Odors White, Viscous Liquid/SlightOder
Flash Point >214°F(>101.1° C)(Closed cup
Specific Gravity 1.0
Percent Volatile by 0
Evaporation Standard Butylacetate =1
Auto Ignition Temp

Not applicable
 

Lower Flamm. Limit in Air Not applicable
 
Upper Flamm. Limit in Air  Not applicable
 
Solubility in Water Soluble

STABILITY

Stable

CONDITIONS TO AVOID

Oxidizing material can cause a reaction

MATERIALS TO AVOID

 None known

HAZARDOUS DECOMPOSITION PRODUCTS

Carbon dioxide, carbon monoxide,formaldehyde

HAZARDOUS POLYMERIZATION

Will not occur
 
Conditions to Avoid  None known

Chronic toxicity:None known
Specific effects
Carcinogenic effects:None known
Mutagenic effects:None known
Reproductive toxicity:None known
Target organ effects None known

Environmental Information:No data available

Waste from residues / unused products:Dispose of according to all federal, state and local applicable regulations

DOT Classification: Not Regulated

International Inventories
All components of this product are listed on the following inventories: U.S.A. (TSCA), Canada (DSL/NDSL), Australia (AICS), Phlippines (PICCS),China (IECSC).U.S. Regulations California Proposition 65:This product is not subject to the reporting requirements under California's Proposition 65 STATE RIGHT TO KNOW
Ingredient(s)Water 7732-18-5 CERCLA/ SARA None Canada WHMIS hazard class:Non-controlled 

Flammability Health Reactivity

Revisions
 

  NFPA
 
7/30/2010 0.1 updated msds to 16 section from 10 section msds. STN
3/25/2013 0.2 Revise all sections to indicate Non-hazardous mixture. LS
 3/4/2009  0 Creation date LS

The information herein is believed to be accurate and is offered in good faith for the user's consideration and investigation. No warranty either expressed or implied is made for the completeness or accuracy of the information whether originating from the above mentioned company or not. Users of this material should satisfy themselves by independent investigation of current scientific and medical knowledge that the material

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Request the signed SDS as PDF

Availability

Polish Preparation For Metal manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Polish Preparation For Metal at a competitive price from us. We have ready stock of Polish Preparation For Metal in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Our stock points and branches