RXSOL CHEMO PHARMA International Navi Mumbai, India

RXSOL RXSOL CHEMO PHARMA International
Request a quoteQuote

Products

7,087 products across 101 categories for marine, industrial, water treatment and laboratory use.

Browse all products Product catalogue

Marine & Ship Care

Tank & Hold Cleaning

Water Treatment

Oil Field & Heavy Industry

Laboratory & Testing

Solvents & Raw Chemicals

Cleaning & Hospitality

Air Lines

RXSOL 27 Gas Turbine Compressor Cleaning Fluid

RXSOL 27 is a concentrated, neutral, water-based detergent for cleaning and corrosion-inhibiting gas-turbine compressors in one operation. It is a blend of non-ionic surfactants, corrosion inhibitors, organic solvents and demineralised water — pH 7.5–8.5, specific gravity 1.01, free of aromatics, alkyl-phenol ethoxylates and halogens, with minimal ash so that turbine-blade cooling holes are not blocked during hot (on-line) washes. Applied by spray ring or lance in starter-driven off-line washes or fired on-line washes as directed by the engine manufacturer; the inhibitor leaves the engine ready for instant restart even in salty offshore air. Clear pale-straw liquid, fully water-soluble, non-corrosive to turbine materials and synthetic turbine oils.
Part number
RXSOL-16-1927-210
Category
Air Lines
Brand
RXSOL
Request a quote WhatsApp Safety data
RXSOL 27 Gas Turbine Compressor Cleaning Fluid

Overview

RXSOL 27 is a concentrated, neutral, environmentally friendly, biodegradable, waterbased detergent cleaning fluid for cleaning and corrosion inhibition of gas turbine compressors. One operation cleans and protects the engine – and also inhibits corrosion.

Blend of non-ionic surfactants, corrosion inhibitors, organic solvents and demineralised water.

Technical specifications

pH

:

7.5 - 8.5

Specific gravity

:

1.01

Total alkali metals

:

<0.5ppm after dilution

Ash

:

<0.01%

Aromatic compounds

:

None

Alkyl phenol ethoxylates

:

None

Halogens (measured as total Chlorine)

:

<10 ppm for concentrate

pH

:

7.5 - 8.5

Specific gravity

:

1.01

Total alkali metals

:

<0.5ppm after dilution

Ash

:

<0.01%

Aromatic compounds

:

None

Alkyl phenol ethoxylates

:

None

Halogens (measured as total Chlorine)

:

<10 ppm for concentrate

pH

:

7.5 - 8.5

Specific gravity

:

1.01

Total alkali metals

:

<0.5ppm after dilution

Ash

:

<0.01%

Aromatic compounds

:

None

Alkyl phenol ethoxylates

:

None

Halogens (measured as total Chlorine)

:

<10 ppm for concentrate

pH

:

7.5 - 8.5

Specific gravity

:

1.01

Total alkali metals

:

<0.5ppm after dilution

Ash

:

<0.01%

Aromatic compounds

:

None

Alkyl phenol ethoxylates

:

None

Halogens (measured as total Chlorine)

:

<10 ppm for concentrate

pH

:

7.5 - 8.5

Specific gravity

:

1.01

Total alkali metals

:

<0.5ppm after dilution

Ash

:

<0.01%

Aromatic compounds

:

None

Alkyl phenol ethoxylates

:

None

Halogens (measured as total Chlorine)

:

<10 ppm for concentrate

pH

:

7.5 - 8.5

Specific gravity

:

1.01

Total alkali metals

:

<0.5ppm after dilution

Ash

:

<0.01%

Aromatic compounds

:

None

Alkyl phenol ethoxylates

:

None

Halogens (measured as total Chlorine)

:

<10 ppm for concentrate

pH

:

7.5 - 8.5

Specific gravity

:

1.01

Total alkali metals

:

<0.5ppm after dilution

Ash

:

<0.01%

Aromatic compounds

:

None

Alkyl phenol ethoxylates

:

None

Halogens (measured as total Chlorine)

:

<10 ppm for concentrate

pH

:

7.5 - 8.5

Specific gravity

:

1.01

Total alkali metals

:

<0.5ppm after dilution

Ash

:

<0.01%

Aromatic compounds

:

None

Alkyl phenol ethoxylates

:

None

Halogens (measured as total Chlorine)

:

<10 ppm for concentrate

Applications

Gas Turbine Compressor Cleaning.
 
Gas turbine compressor cleaning fluids are specialized cleaning agents used to remove deposits from gas turbine compressors, improving efficiency and performance. These fluids are often biodegradable, water-based, and contain corrosion inhibitors. 

Dosage and directions

By spray ring or lance in either starter-driver (off-line) or fired (on-line) wash as directed by the engine manufacturers, in the quantities recommended in the engine manual. It is essential during hot wash that the cleaner should leave as little ash residue as possible to avoid blocking turbine blade cooling holes. RXSOL 27 has a maximum ash content of <0.01%, as part of the compliance with OEM specifications for compressor washing fluid.

The unique corrosion inhibitor allows engines to be left ready for an instant restart, even in salty offshore conditions.

Characteristics and notes

Appearance
Clear pale straw coloured liquid with a mild pleasant odour.

Solubility
Completely soluble in water. No agitation required.

Compatibility
Not corrosive or detrimental to any of the materials normally used in gas turbine engines or aircraft components. No adverse effect on synthetic turbine oils.

Purpose:
  • Restore Performance:
    Compressor deposits, caused by dust, dirt, and combustion byproducts, reduce airflow, leading to decreased power output, higher fuel consumption, and increased exhaust temperatures. 
    Prevent Corrosion:
  • Compressor cleaning fluids often contain corrosion inhibitors to protect the engine's metal components from rust and degradation, especially in harsh environments.
    Improve Efficiency:
  • By removing these deposits, cleaning fluids help restore the compressor's original aerodynamic profile, optimizing airflow and improving overall engine efficiency.
    Extend Engine Life:
  • Regular cleaning can help prevent more serious issues caused by fouling and corrosion, potentially extending the lifespan of the gas turbine.
    Types of Cleaning:
  • On-line Cleaning:
    Performed while the engine is running at low or idle speed. This method is convenient but may not be as effective as offline cleaning for removing stubborn deposits.
  • Off-line Cleaning:
    Performed when the engine is shut down. This allows for more thorough cleaning and the use of higher concentrations of cleaning fluid. 

Safety and SDS

Read the safety data sheet before handling. Wear suitable gloves and eye protection.

View safety data sheet
Product Name RXSOL-16-1927-210
Product Type RXSOL 27

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Stock Point : Mumbai, Kandla, Kolkata, Vizag, Chennai, FUjairah, Muscat, Nairobi

Phone +91 22 65113333 / 5555 / 9999
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email rxsolchemicals@gmail.com

This product contains no hazardous ingredients  ( Blend of non-ionic surfactants, Corrosion Inhibitors, Organic solvents and demineralised water.)

skin contact  Irritant
eye contact  Irritant
ingestion

Not toxic by ingestion, may cause mild lung or throat irritation at high concentrations, prolonged or repeated contact may cause drying of skin

INHALATION

If irritation occurs, remove person to fresh air

EYE CONTACT

Immediately flush eye with clean water for at least 15 minutes, get medical attention

SKIN CONTACT

Remove contaminated clothing and shoes, flush area with copious amounts of clean water and soap, seek

INHALATION

If irritation occurs, remove person to fresh air

INGESTION

Do NOT induce vomiting, do not give anything by mouth to an unconscious person, seek medical attention immediately

FLASH POINT

>100°C / 212 °F (PMCC)

CONDITIONS OF FLAMMABILITY

Non-flammable, water based

EXTINCTION MEDIA

Use dry chemical, CO2, alcohol-proof foam, sand or fine water spray

FIRE AND EXPLOSION HAZARD

Oxides of nitrogen, carbon monoxide, carbon dioxide. Fumes are acrid and irritating

METHODS FOR CLEANING UP SMALL SPILLS

Absorb with sand or vermiculite, sweep up and place in container for

later disposal.

METHODS FOR CLEANING UP LARGE SPILLS

Dike for later salvage or disposal. In water, divert flow to prevent spread of product, remove for disposal

ENVIRONMENTAL PRECAUTIONS

Do not allow product or run off to enter any sewer or other water source.

HANDLING

Use in well ventilated area, wear recommended personal protective equipment and wash after handling

STORAGE

Store in dry, cool well ventilated area out of direct sunlight and away from ignition sources. The product has a shelf life of 5 years.

ENGINEERING MEASURES

Use mechanical ventilation if used in a confined area or at elevated temperatures

EYES PROTECTION

Goggles should be worn

HAND PROTECTION

Impermeable gloves such as butyl rubber, wash after handling

SKIN PROTECTION

Long sleeves and long pants to prevent skin contact and closed toe footwear to prevent skin contact

PHYSICAL STATE

Liquid

APPEARANCE

Clear, pale straw color

ODOR

Mild, pleasant

SPECIFIC GRAVITY

1.01

DENSITY

 8.35 lbs/gal

PH

7.2-7.5

FREEZING POINT

0 °C / 32 °F

BOILING POINT

≥100ºC / 212 °F

STABILITY

Product is stable under normal temperature and pressure

MATERIALS TO AVOID

Product is incompatible with strong oxidizing or reducing agents
Skin contact  irritant
Eye contact  irritant
ingestion

Not toxic by ingestion, may cause mild lung or throat irritation at high concentrations, prolonged or repeated contact may cause drying of skin

INHALATION

If irritation occurs, remove person to fresh air

WATER HAZARD CLASS:-  slightly hazardous for water when discharged in large volumes

DISPOSAL :- Dispose of by methods in compliance with local, state and federal regulations.

MOBILITY :-   May penetrate the soil as it is biodegradable.

SEWAGE TREATMENT PLANTS :- Not toxic to sewage organisms at concentrations expected to be found in sewage treatment
                                               plants .

 N/A

 N/A

The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Request the signed SDS as PDF

Availability

RXSOL 27 Gas Turbine Compressor Cleaning Fluid exporter and supplier in Mumbai, Dubai, Kandla, Chennai, Muscat, Visakhapatnam, Kolkata, Fujairah, Sharjah, Abu Dhabi, Muscat Barka Ruwi, Oman, Nairobi Kenya Africa, Sudan, Yemen

Our stock points and branches

Frequently asked questions

Why is compressor cleaning fluid needed?

Dust, oil and combustion by-products foul compressor blades, cutting airflow and output and raising fuel burn and exhaust temperature; regular washing restores several percent of power.

What dilution for RXSOL 27?

Typically 1:4 with demineralised water for both on-line and off-line washes, in the quantities the engine manual specifies; use only demineralised water.

Is it approved by turbine OEMs?

It is formulated to the usual OEM limits on sodium, potassium, sulphur and ash; certificate of analysis per batch.

All Air Lines
Request a quote WhatsApp