|
Porduct Name |
SODAMIDE |
|
Part Number |
RXSOL-60-6605-451 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA
|
Phone |
+91 22 20871200 - 1400 |
|
Fax |
+91 22 27612100 :::AOH :0091 9821214367 |
|
Email |
rxsolchemicals@gmail.com |
|
Website |
www.rxmraine.com |
|
Chemical Name |
Cas No |
EC No |
Whight |
Formula |
|
SODAMIDE |
7782-92-5 |
231-971-0 |
<= 100 % |
H2NNa |
|
Signal Word |
Danger |
|
Hazard Statements |
H314 Causes severe skin burns and eye damage. H412 Harmful to aquatic life with long lasting effects. |
|
Precautionary statements |
P260 Do not breathe dust. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection. P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. |
|
Supplemental Hazard information (EU) |
EUH014 Reacts violently with water. EUH019 May form explosive peroxides. EUH029 Contact with water liberates toxic gas. |
|
Other hazards |
This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. May form explosive peroxides. |
|
General advice |
First aiders need to protect themselves. Show this material safety data sheet to the doctor in attendance. |
|
If inhaled |
After inhalation: fresh air. Call in physician. |
|
Eye Contact |
After eye contact: rinse out with plenty of water. Immediately call in ophthalmologist. Remove contact lenses. |
|
Swallowed |
After swallowing: make victim drink water (two glasses at most), avoid vomiting (risk of perforation). Call a physician immediately. Do not attempt to neutralise. |
|
Skin Contact |
In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower. Call a physician immediately. |
|
Most important symptoms and effects, both acute and delaye |
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 |
|
Indication of any immediate medical attention and special treatment needed |
No data available |
|
Suitable extinguishing media |
Carbon dioxide (CO2) Dry powder Cover with dry sand or cement. |
|
Unsuitable extinguishing media |
Foam Water |
|
Special hazards arising from the substance or mixture |
Sodium oxides Combustible. May not get in touch with: Water Development of hazardous combustion gases or vapours possible in the event of fire. |
|
Further information |
Suppress (knock down) gases/vapors/mists with a water spray jet. Prevent fire extinguishing water from contaminating surface water or the ground water system. |
|
Advice for firefighters |
Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing. |
|
Personal precautions, protective equipment and emergency procedures |
Advice for non-emergency personnel: Avoid inhalation of dusts. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert. For personal protection see section 8. |
|
Enviromental Precaution |
Do not let product enter drains. Risk of explosion. |
Methods and materials for
containment and cleaning |
Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up dry. Dispose of properly. Clean up affected area. Avoid generation of dusts. |
|
Reference to other sections |
For disposal see section 13. |
|
Advice on safe handling |
Keep workplace dry. Do not allow product to come into contact with water. |
|
Storage conditions |
Tightly closed. Keep away from heat and sources of ignition. Never allow product to get in contact with water during storage. Air sensitive. Handle and store under inert gas. Test for peroxide formation periodically and before distillation. |
|
Storage class |
Storage class (TRGS 510): 4.3: Hazardous materials, which set free flammable gases upon contact with water |
|
Specific end use(s) |
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated |
|
Eye/face protection |
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Tightly fitting safety goggles |
|
Body Protection |
protective clothing |
|
Skin protection |
This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de). Full contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested:KCL 741 Dermatril® L This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de). Splash contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested:KCL 741 Dermatril® L |
|
Respiratory protection |
required when dusts are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter type: Filter type P2 The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
|
|
Control of environmental exposure |
Do not let product enter drains. Risk of explosion. |
|
Physical state |
Solid |
|
Colour |
Light gray |
|
Odour |
No data available |
|
pH |
No data available |
|
Melting Point |
210 °C - lit. |
|
Boiling Point |
400 °C - lit. |
|
Flash Point |
Not applicable |
|
Flammability (solid, gas) |
No data available |
|
Upper/lower flammability or explosive limits |
No data available |
|
Autoignition temperature |
No data available |
|
Decomposition temperature |
No data available |
|
Vapour pressure |
No data available |
|
Viscosity |
No data available |
|
Density |
1,39 g/cm3 at 20 °C |
|
Relative Density |
No data available |
|
Partition coefficient |
Not applicable for inorganic substances |
|
Explosive properties |
No data available |
|
Particle characteristics |
No data available |
|
Reactivity |
Formation of peroxides possible. The following applies in general to flammable organic substances and mixtures: in correspondingly fine distribution, when whirled up a dust explosion potential may generally be assumed. Reacts violently with water. Contact with water liberates toxic gas. |
|
Chemical stability |
sensitive to moisture Test for peroxide formation before using or discard after 3 months. |
|
Possibility of hazardous reactions |
No data available |
|
Conditions to avoid |
Moisture. |
|
Incompatible materials |
No data available
|
|
Hazardous decomposition products |
Peroxides In the event of fire: see section 5 |
|
Acute toxicity |
Symptoms: If ingested, severe burns of the mouth and throat, as well as a danger of perforation of the esophagus and the stomach., Nausea, Vomiting, Diarrhea Symptoms: mucosal irritations, Cough, Shortness of breath, Possible damages:, damage of respiratory tract Dermal: No data available |
|
Skin corrosion/irritation |
Causes severe burns. |
|
Serious eye damage/irritation |
Causes serious eye damage. Risk of blindness! |
|
Respiratory or skin sensitization |
No data available |
|
Carcinogenicity |
No data available |
|
Germ cell mutagenicity |
No data available |
|
Reproductive toxicity |
No data available |
|
Specific target organ toxicity - single exposure |
No data available
|
|
Additional Information |
Assessment : The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. Cough, Shortness of breath, Headache, Nausea, Vomiting To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. Decomposition of the substance with tissue moisture. Other dangerous properties can not be excluded. Handle in accordance with good industrial hygiene and safety practice. |
|
Persistence and degradability |
The methods for determining biodegradability are not applicable to inorganic substances. |
|
Toxicity |
Toxicity to fish semi-static test LC50 - Danio rerio (zebra fish) - 45 mg/l - 96 h (OECD Test Guideline 203) Remarks: The value is given in analogy to the following substances: Lithium amide Toxicity to daphnia and other aquatic invertebrates static test EC50 - Daphnia magna (Water flea) - 22 mg/l - 48 h (OECD Test Guideline 202) Remarks: The value is given in analogy to the following substances: Lithium amide Toxicity to algae static test ErC50 - Desmodesmus subspicatus (green algae) - 43 mg/l - 72 h (OECD Test Guideline 201) Toxicity to bacteria static test EC50 - activated sludge - 440 mg/l - 3 h (OECD Test Guideline 209) Remarks: The value is given in analogy to the following substances: Lithium amide |
|
Mobility in soil |
No data available |
|
Results of PBT and vPvB assessment |
This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
|
Endocrine disrupting properties |
Assessment : The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. |
|
Other adverse effects |
May be harmful to aquatic organisms due to the shift of the pH. Harmful effect due to pH shift. Forms toxic and corrosive mixtures with water even if diluted. Discharge into the environment must be avoided. |
|
Waste treatment Method |
No data available |
|
UN number |
ADR/RID:1390 IMDG:1390 IATA: 1390 |
|
UN proper shipping name |
ADR/RID:ALKALI METAL AMIDES IMDG:ALKALI METAL AMIDES IATA:ALKALI METAL AMIDES |
|
Transport hazard class(es) |
ADR/RID: 4.3 IMDG: 4.3 IATA: 4.3 |
|
Packaging group |
ADR/RID: II IMDG: II IATA:II |
|
Environmental hazards |
ADR/RID: No IMDG: No IATA: No |
|
Special precautions for user |
No data available |
|
Safety, health and environmental regulations/legislation specific for the substance or mixture |
This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006. |
|
Other regulations |
Observe work restrictions regarding maternity protection in accordance to Dir 92/85/EEC or stricter national regulations where applicable. Take note of Dir 94/33/EC on the protection of young people at work. |
|
Chemical Safety Assessment |
For this product a chemical safety assessment was not carried out |
|
Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and weassume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
|
