RXSOL CHEMO PHARMA International Navi Mumbai, India

Products

7,082 products across 98 categories for marine, industrial, water treatment and laboratory use.

Browse all products Product catalogue

Lab Chemical

SODIUM BENZOATE AR

Part number
RXSOL-60-6605-472
Category
Lab Chemical
Brand
RXSOL
RXSOL

Overview

Sodium benzoate is commonly used as a preservative in cosmetics and personal care items, such as hair products, baby wipes, toothpaste, and mouthwash . It also has industrial uses. One of its biggest applications is to deter corrosion, such as in coolants for car engines .

Applications

Sodium benzoate is a preservative, with the E number E211. It is most widely used in acidic foods such as salad dressings (i.e. acetic acid in vinegar), carbonated drinks (carbonic acid), jams and fruit juices (citric acid), pickles (acetic acid), condiments, and frozen yogurt toppings.

Dosage and directions

Sodium benzoate is typically dosed for adults at 2–5 g orally twice daily.

Characteristics and notes

Sodium benzoate and potassium sorbate are extremely useful agents for food and beverage preservation, yet concerns remain over their complete safety. Benzoate can react with the ascorbic acid in drinks to produce the carcinogen benzene. A few children develop allergy to this additive while, as a competitive inhibitor of D-amino acid oxidase, benzoate can also influence neurotransmission and cognitive functioning. 

Safety and SDS

Read the safety data sheet before handling. Wear suitable gloves and eye protection.

View safety data sheet
Product Name               SODIUM BENZOATE AR
Part Number   RXSOL-60-6605-472

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA  

Phone +91 22 20871200 - 1400
Fax +91 22 27612100 :::AOH :0091 9821214367
Email rxsolchemicals@gmail.com
Website www.rxmraine.com
Chemical  Name                            CAS                    EC number          Weight                  Formula                                 
Benzoic acidsodium salt 532-32-1 208-534-8 <= 100 % C7H5NaO2
Signal Word  Warning
Hazard Statements H314 Causes severe skin burns and eye damage.
P280 Wear    protective gloves.P305 + P351 + P338 Wear eye protection/ face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Precautionary statements   P264 Wash skin thoroughly after handling. P280 Wear eye protection/ face protection. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337 + P313 If eye irritation persists: Get medical advice/ attention.
Classification of the substance or mixture Not a hazardous substance or mixture according to Regulation (EC) No 1272/2008.
Supplemental Hazard      Statements None,
Other hazards  This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. Reacts violently with water.
General advice First aiders need to protect themselves. Show this material safety data sheet to the doctor in attendance.
If inhaled  After inhalation: fresh air. Call in physician.
Eye Contact After eye contact: rinse out with plenty of water. Call in ophthalmologist. Remove contact lenses.
Swallowed After swallowing: immediately make victim drink water (two glasses at most). Consult a physician.
Skin Contact In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower.
Inhalation Remove patient to fresh air, keep warm and at rest and get medical assistance in necessary. 
Ingestion Rinse mouth with water. Do not induce vomiting. Never give anything by mouth to an unconscious person. Call a doctor or Poison Control Center immediately.
Most important symptoms and effects, both acute and delaye The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11
Indication of any immediate medical attention and special treatment needed  No data available
Flammability                                                  May be combustible at high temperature.
Flash Point Higher than 93.3°C (200°F).
Suitable extinguishing media Water Foam Carbon dioxide (CO2) Dry powder
Unsuitable extinguishing media For this substance/mixture no limitations of extinguishing agents are given.
Special hazards arising from the substance or mixture  Carbon oxides Sodium oxides Combustible. Development of hazardous combustion gases or vapours possible in the event of fire.
Further information Suppress (knock down) gases/vapors/mists with a water spray jet. Prevent fire extinguishing water from contaminating surface water or the ground water system.
Hazardous combustion
products
Fire may cause the evolution of Sulphur oxides, nitrogen oxides.
Advice for firefighters In the event of fire, wear self-contained breathing apparatus.
Protective Equipment Use personal protective equipment.
Specific Hazards Arising from the Chemical Has a fire-promoting effect due to the release of oxygen.
Ambient fire may liberate hazardous vapours.
Personal precautions, protective equipment and emergency procedures Advice for non-emergency personnel: Avoid inhalation of dusts. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.For personal protection see section 8.
Spillage Oxidizing material. Stop leak if without risk. Avoid contact with a combustible material (wood, paper, oil, clothing...). Keep substance damp using water spray. Do not touch spilled material. Prevent entry into sewers, basements or confined areas dike if needed. Eliminate all ignition sources. Call for assistance on disposal.
Personal Protection Advice for non-emergency personnel: Avoid inhalation of dusts. Evacuate the danger area, observe emergency procedures, consult an expert. Advice for emergency responders: Protective equipment see section 8.
Enviromental Precaution Do not let product enter drains.
Methods and materials for
containment and cleaning
Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up dry. Dispose of properly. Clean up affected area. Avoid generation of dusts.
Advice on safe handling  Keep workplace dry. Do not allow product to come into contact with water.
Advice on protection against fire and explosion Keep away from open flames, hot surfaces and sources of ignition. 
Incompatible materials  Keep away from alkalis, strong oxidizing agents and metals. Provide containment walls of adequate capacity to hold any accidental spills. 
Hygiene measures Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance. For precautions see section 2.2.
Precautions for     safe handling For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities  Store the container tightly closed in a dry, cool and well-ventilated place. Store apart from foodstuff containers or incompatible materials.
Storage conditions Tightly closed. Dry. Hygroscopic.
Storage class Storage class (TRGS 510): 13: Non Combustible Solids
Specific end     use(s) Apart from the uses mentioned in section 1.2 no other specific uses are stipulated
Advice on general occupational hygiene Advice on safe handling Observe label precautions. Change contaminated clothing. Wash hands after working with substance.
Requirements for storage  Keep in cool and store under shade. 
Exposure controls  No specific additional engineering controls are required. Provide good natural or artificial ventilation. 
Engineering Control Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit.
Eye/face protection Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses
Body Protection Acid-resistant protective clothing
Skin protection This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de). Full contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested:KCL 741 Dermatril® L This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de). Splash contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested:KCL 741 Dermatril® L
Respiratory protection Required when dusts are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter type: Filter type P2 The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
Other Protection      Measure Handle in accordance with good industrial hygiene and safety practice.
Control of    environmental exposure Do not let product enter drains.
Thermal hazards No data available
Physical state Powder
Colour White
Odour Odorless
Odor Threshold Not Applicable
pH ca.8 at 100 g/l at 20 °C
Melting Point > 300 °C - lit.
Boiling Point > 450 - < 475 °C at 1.013 hPa
Flash Point No data available
Evaporation Rate Not Applicable
Flammability (solid, gas) No data available
Explosive limits No Data Available
Upper/lower flammability or explosive limits No data available
Autoignition temperature No data available
Decomposition temperature                                           No data available                                                                                                 
Vapour pressure Not applicable 
Density 1,50 g/cm3 at 20 °C
Relative  Density 1,5 at 20 °C
Freezing point  No data available 
Specific Gravity No data available 
Partition coefficient log Pow: 1,88
Explosive properties No data available 
Solubility 556 g/l - soluble
Ignition temperature No information available.
Particle characteristics No data available 
Reactivity                        The following applies in general to flammable organic substances and mixtures: in correspondingly fine distribution, when whirled up a dust explosion potential may generally be assumed.
Stability The product is chemically stable under standard ambient conditions (room temperature) .
Possibility of hazardous reactions Violent reactions possible with: Strong oxidizing agents Strong acids
Conditions to avoid Avoid moisture. no information available
Incompatible materials No data available
Hazardous Polymerization In the event of fire: see section 5
Acute toxicity  Oral: No data available Inhalation: No data available Dermal: No data available
Skin corrosion/irritation Skin - Rabbit Result: No skin irritation - 4 h (OECD Test Guideline 404)
Serious eye      damage/eye       irritation  Eyes - Rabbit Result: irritating - 24 h (OECD Test Guideline 405)
Respiratory or skin    sensitization  Maximization Test - Guinea pig Result: negative (OECD Test Guideline 406) 
Toxicity to Animal WARNING: THE LC50 VALUES HEREUNDER ARE ESTIMATED ON THE Acute oral toxicity (LD50): 689 mg/kg [Rat].
Toxic Effects on         Human May cause damage to the following organs: upper respiratory tract. Other Toxic Effects on Humans: Hazardous in case of skin contact (irritant, sensitizer), of ingestion, of inhalation (lung irritant, lung sensitizer).
Carcinogenicity No data available
Germ cell        mutagenicity  No data available
Reproductive toxicity  No data available
Specific target organ toxicity - single      exposure No data available
Special Remarks on other Toxi  Effects on Humans Acute Potential Health Effects: Skin: Causes skin irritation. May cause skin sensitization, an allergic reation, which becomes evident upon re-exposure to this material. Eyes: Causes eye irritation. Ingestion: Causes gastrointestinal (digestive) tract irritation with nausea, vomiting, and diarrhea. May be harmful if swallowed. Inhalation: Causes respiratory tract irritation. May cause chemical pneumonitis and pulmonary edema, inflammation, edema of bronchi and larynx. Chronic Potential Health Effects: Repeated or prolonged skin exposure may cause allergic reactions in sensitive individuals. Repeated or prolonged exposure by inhalation may affect respiration and metabolism.
Endocrine disrupting           properties The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. Repeated dose toxicity - Rat - male and female - Oral - 18 - 24 Months - NOAEL (No observed adverse effect level) - 1.000 mg/kg Remarks: (ECHA) Repeated dose toxicity - Rabbit - male and female - Dermal - 21 Days - NOAEL (No observed adverse effect level) - > 2.500 mg/kg RTECS: DH6650000 To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated.
Persistence and degradability Biodegradability aerobic - Exposure time 28 d Result: 94 % - Readily biodegradable.
Toxicity to fish  Flow-through test LC50 - Pimephales promelas (fathead minnow) - 484 mg/l - 96 h (US-EPA)
Toxicity to daphnia and other aquatic invertebrates Static test LC50 - Daphnia magna (Water flea) - > 100 mg/l - 96 h Remarks: (ECHA)
Toxicity to algae Static test ErC50 - Pseudokirchneriella subcapitata (green algae) - > 100 mg/l - 72 h (OECD Test Guideline 201)
Products Biodegradation The methods for determining the biological degradability are not applicable to inorganic substances.
Mobility in soil No Information available
Results of PBT and vPvB assessment This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
Endocrine disrupting       properties The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher.
Other adverse effects May be harmful to aquatic organisms due to the shift of the pH. Stability in water DT50 - < 0,01 min at 25 °C
Disposal methods The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.
Contaminated packaging Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.
Waste treatment      Method No data available
UN number ADR/RID:         IMDG:         IATA:   
UN proper shipping name  ADR/RID:         IMDG:         IATA: 
Transport hazard class(es)      ADR/RID:         IMDG:         IATA:  
Packaging group ADR/RID:        IMDG:           IATA: 
Environmental hazards ADR/RID: No   IMDG: No       IATA: No
Special precautions for user Tunnel restriction code : (C/E) 
Further information Not classified as dangerous in the meaning of transport regulations.
Transport in bulk according to IMOinstruments No data available
Inventory status Components are on the following inventories: Polymaleic acid: - US TSCA, Canadian DSL, EU EINECS, Australian AICS, Korean, Philippine PICCS and Chinese Xi irritant R 36/38 Irritant to eyes & skin R 41 Risk of serious damage to eyes S24/25 Avoid contact with skin and eyes S26/28 In case of contact eyes & skin, rinse with plenty water and seek medical advice Section 312/313: Not listed. Not listed under California proposition 65. 
Safety, health and environmental regulations/legislation specific for the substance or mixture This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations specific for the product in question European Inventory of Existing Commercial Chemical Substances (EINECS) -Listed.EC Inventory Listed. United States Toxic Substances Control Act (TSCA) Inventory- Listed. China Catalog of Hazardous chemicals 2015 Not- Listed. New Zealand Inventory of Chemicals (NZIoC)Listed. PICCS -Listed. Vietnam National Chemical Inventory -Listed. IECSC Listed. Korea Existing Chemicals List (KECL) -Listed.
National legislation Seveso III: Directive 2012/18/EU of the European Parliament and of the Council on the control of major-accident hazards involving dangerous substances. : OTHER HAZARDS 
Other regulations Take note of Dir 94/33/EC on the protection of young people at work.
Chemical Safety Assessment For this product a chemical safety assessment was not carried out.
Other Information

The information above is believed to be accurate and represents the  best information   currently    available  to us.  However,   we   make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and  weassume  no liability resulting from its use. Users should make  their  own  investigations  to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International  has been advised of the possibility of such damages.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Request the signed SDS as PDF

Availability

[SODIUM BENZOATE AR] manufacturers, suppliers, exporters in Mumbai, Gandhidham, Kolkata, Varanasi, Visakhapatnam, Chennai, Fujairah, Dubai, Canada BC, Barka, Sohar, Muscat, Oman.
Lab chemicals manufacturers, suppliers, exporters in India, UAE Middle East, Barka, Sohar, Muscat, Oman, Canada.
 
[SODIUM BENZOATE AR] is available in small packing as well as in bulk. Buy premium quality [SODIUM BENZOATE AR] and other lab chemicals from one of the most trusted brands.

Our stock points and branches