SODIUM BISMUTHATE
- Part number
- RXSOL-60-6605-474
- Category
- Lab Chemical
- Brand
- RXSOL
Overview
Sodium bismuthate is an inorganic compound, and a strong oxidiser. It is somewhat hygroscopic, but not soluble in cold water, which can be convenient since the reagent can be easily removed after the reaction. It is one of the few water insoluble sodium salts.
Applications
Sodium bismuthate is used in a test for manganese.
Dosage and directions
Adults and teenagers—The usual dose is 2 tablespoonfuls every half-hour to one hour if needed. You should not take more than 16 tablespoonfuls of the regular-strength suspension or 8 tablespoonfuls of the concentrate in twenty-four hours. Children—Should not be used in children younger than 12 years of age.
Characteristics and notes
Sodium bismuthate is an inorganic compound, and a strong oxidiser. It is somewhat hygroscopic, but not soluble in cold water, which can be convenient since the reagent can be easily removed after the reaction. It is one of the few water insoluble sodium salts.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | RXSOL-60-6605-474 |
| Product Type | SODIUM BISMUTHATE |
| Revised date |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Chennai, Visakhapatnam, Kolkata, Fujairah, Muscat Barka
| Phone | +91 22 27815541 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
2.1 Substances : SODIUM BISMUTHATE
CAS-No. : 12232-99-4
Substance name Contents CAS No
Bismuth sodium trioxide 100 % 12232-99-4
Substance.
Contains no other components or impurities which will influence the classification of the
product.
3.1 Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Acute toxicity, Oral (Category 4), H302
For the full text of the H-Statements mentioned in this Section, see Section 16.
3.2 Label elements
Labelling according Regulation (EC) No 1272/2008
Pictogram
Signal word : Warning Hazard statement(s) H302
Harmful if swallowed.
Precautionary statement(s) none
Supplemental Hazard
Statement : none
3.3 Other hazards
This substance/mixture contains no components considered to be either persistent,
bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB)
at levels of 0.1% or higher.
4.1 Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration.
Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water.
Consult a physician.
4.2 Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see
section 2.2) and/or in section 11
4.3 Indication of any immediate medical attention and special treatment needed
No data available
5.1 Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
5.2 Special hazards arising from the substance or mixture
Carbon oxides, Sodium oxides
5.3 Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
5.4 Further information
No data available
6.1 Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist
or gas. Ensure adequate ventilation. Avoid breathing dust.
For personal protection see section 8.
6.2 Environmental precautions Do not let product enter drains.
6.3 Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in
suitable, closed containers for disposal.
6.4 Reference to other sections
For disposal see section 13.
7.1 Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.
For precautions see section 2.2.
7.2 Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Hygroscopic. Storage class (TRGS 510): Non Combustible Solids
7.3 Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated
8.1 Control parameters
8.2 Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands
before breaks and at the end of workday.
• Personal protective equipment
• Eye/face protection
Safety glasses with side-shields conforming to EN166 Use equipment for eye protection
tested and approved under appropriate government standards such as NIOSH (US) or EN
166(EU).
• Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal
technique (without touching glove's outer surface) to avoid skin contact with this product.
Dispose of contaminated gloves after use in accordance with applicable laws and good
laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy
the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.
If used in solution, or mixed with other substances, and under conditions which differ
from EN 374, contact the supplier of the CE approved gloves. This recommendation is
advisory only and must be evaluated by an industria situation of anticipated use by our
customers. It should not be construed as offering an approval for any specific use
scenario.
• Body Protection
Impervious clothing, The type of protective equipment must be selected according to the
concentration and amount of the dangerous substance at the specific workplace.
• Respiratory protection
For nuisance exposures use type P95 (US) or type P1 (EU EN 143) particle r (US) or type
ABEKP2 (EU EN 143) respirator cartridges. Use respirators and components tested and
approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Do not let product enter drains.
9.1 Information on basic physical and chemical properties
Odour : No data available
Odour Threshold: No data available
pH: No data available
Melting point/freezing point : No data available
Initial boiling point and boiling range :No data available
Flash point: Not applicable
Evaporation rate: No data available
Flammability (solid, gas): No data available
Upper/lower flammability or explosive limits :No data available
Vapour pressure : No data available
Vapour density : No data available
Relative density No data available
Water solubility: No data available
Partition coefficient: noctanol/ water : No data available
Auto-ignition temperature : No data available
Decomposition temperature : No data available
Viscosity: No data available
Explosive properties : No data available
Oxidizing properties ; No data available
9.2 Other safety information
No data available
10.1 Reactivity
No data available
10.2 Chemical stability
Stable under recommended storage conditions.
10.3 Possibility of hazardous reactions
No data available
10.4 Conditions to avoid
Avoid moisture.
10.5 Incompatible materials
acids
10.6 Hazardous decomposition products
Hazardous decomposition products formed under fire conditions. - Sodium oxides,
Bismuth oxides Other decomposition products - No data available
In the event of fire: see section 5
11.1 Information on toxicological effects
Acute toxicity
LD50 Oral - Rat - 420 mg/kg(Bismuth sodium trioxide)
Skin corrosion/irritation
No data available(Bismuth sodium trioxide)
Serious eye damage/eye irritation
No data available(Bismuth sodium trioxide)
Respiratory or skin sensitisation
No data available(Bismuth sodium trioxide)
Germ cell mutagenicity
No data available(Bismuth sodium trioxide)
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is
identified as probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
No data available(Bismuth sodium trioxide)
Specific target organ toxicity - single exposure
No data available(Bismuth sodium trioxide)
Specific target organ toxicity - repeated exposure
No data available
Aspiration hazard
No data available(Bismuth sodium trioxide)
Additional Information
RTECS: VZ1750000
Symptoms of chronic bismuth toxicity in humans consists of decreased appet line on the
gums, foul breathe, gingivitis, and dermatitis. Jaundice and Bismuth nephropathy with
proteinuria may occur. The kidney is the site of lower. Bismuth does pass into the
amniotic fluid and into the fetus., To the best of our knowledge, the chemical, physical,
and toxicological properties have not been thoroughly investigated.(Bismuth sodium
trioxide)
12.1 Toxicity
No data available
12.2 Persistence and degradability
No data available
12.3 Bioaccumulative potential
No data available
12.4 Mobility in soil
No data available(Bismuth sodium trioxide)
12.5 Results of PBT and vPvB assessment
This substance/mixture contains no components considered to be either persistent,
bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at
levels of 0.1% or higher.
12.6 Other adverse effects
No data available
13.1 Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a
licensed professional waste disposal service to dispose of this material. Dissolve or mix
the material with a combustible solvent and burn in a chem scrubber.
Contaminated packaging
Dispose of as unused product.
14.1 UN number
ADR/RID: - IMDG: - IATA: -
14.2 UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
14.3 Transport hazard class(es)
ADR/RID: - IMDG: - IATA: -
14.4 Packaging group
ADR/RID: - IMDG: - IATA: -
14.5 Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
14.6 Special precautions for user
No data available
15.1 Safety, health and environmental regulations/legislation specific for the
substance or mixture
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
15.2 Chemical safety assessment
For this product a chemical safety assessment was not carried out
Abbreviations and acronyms : PBT: persistent, bioaccumulative and toxic.
vPvB: very persistent and very bioaccumulative
Sources of key data used : REGULATION (EC) No 1272/2008 OF THE EUROPEAN
PARLIAMENT AND OF THE COUNCIL of 16 December 2008 on classification,
labelling and packaging of substances and mixtures, amending and repealing Directives
67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006
Further information : None.
In accordance with REACH Regulation (CE) Nº 1907/2006 and with CLP Regulation
(CE) Nº 1272/2008
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
[SODIUM BISMUTHATE] manufacturers, suppliers, exporters in Mumbai, Gandhidham, Kolkata, Varanasi, Visakhapatnam, Chennai, Fujairah, Dubai, Canada BC, Barka, Sohar, Muscat, Oman.
Lab chemicals manufacturers, suppliers, exporters in India, UAE Middle East, Barka, Sohar, Muscat, Oman, Canada.
[SODIUM BISMUTHATE] is available in small packing as well as in bulk. Buy premium quality [SODIUM BISMUTHATE] and other lab chemicals from one of the most trusted brands.
