RXSOL CHEMO PHARMA International Navi Mumbai, India

Products

7,061 products across 71 categories for marine, industrial, water treatment and laboratory use.

Browse all products Product catalogue

Lab Chemical

SODIUM HYDROXIDE Customized soln

As per customer demand we are customizing SODIUM HYDROXIDE Liquid Solution.
Part number
RXSOL-60-6165-500
Category
Lab Chemical
Brand
RXSOL
RXSOL

Overview

Sodium hydroxide 10% 20%, 30% 40% 50% solution Caustic Soda lye or Caustic Soda solution CAS no. 1310-73-2

Applications

Sodium hydroxide 10% 20%, 30% 40% and 50% solution (Caustic Soda Lye or Caustic Soda Solution or NaOH solution)  Extra Pure / LR / AR / ACS.

Dosage and directions

CVS - Concentrated volumetric solutions of Sodium Hydroxide.

Characteristics and notes

a. Sodium hydroxide (Caustic Soda Lye or Caustic Soda solution or NaOH solution) 10% 20% 30% 40% 50% solution - Commercial grade

b. Sodium hydroxide (Caustic Soda Lye or Caustic Soda solution or NaOH solution) 10% 20% 30% 40% 50% solution - Technical grade.

c. Sodium hydroxide (Caustic Soda Lye or Caustic Soda solution or NaOH solution) 10% 20% 30% 40% 50% solution - Pure

d. Sodium hydroxide (Caustic Soda Lye or Caustic Soda solution or NaOH solution) 10% 20% 30% 40% 50% solution - Extra Pure

e. Sodium hydroxide (Caustic Soda Lye or Caustic Soda solution or NaOH solution) 10% 20% 30% 40% 50% solution - LR.

Safety and SDS

Read the safety data sheet before handling. Wear suitable gloves and eye protection.

View safety data sheet
Product Name RXSOL-60-6165-500
Product Type Sodium Hydroxide Normal Solution

 Company Details: 

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Stock Point ::: Kandla, Mumbai, Kolkata, Chennai, Visakhapatnam, Fujairah

Phone +91 22 27815541 / 42
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email rxsolchemicals@gmail.com

       

SARA 313 Component  CAS Number Percent Comp. Dimension
 
Exposure
 Limits
 
Sodium Hydroxide CAS-1310-73-2  50.00%  W/V OSHA PEL 2
mg/mƒ ACGIH
2mg/mƒ
 
Water, Deionized ASTM Type II CAS-7732- 18-5  50.00% V/V None
 Established  

May be harmful if swallowed. May cause irritation. Avoid breathing vapors, or dusts. Use with adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash thoroughly after handling.

Emergency Overview:Harmful If Swallowed Or Inhaled. May Cause Burns To Any Area Of
Contact. Reacts With Water, Acids And Other Materials.

Inhalation:Mists May Irritate Respiratory Tract.

Ingestion:Swallowing may Cause Burns of the Mouth, Throat and Stomach.

Skin:May Cause Irritation to Skin

Eye Contact:May Cause Irritation to Eyes, and with Greater Exposures, Severe Buns with Possibly Blindness

Chronic Exposure:Persons with Pre-Existing Skin Disorders may be Susceptible to these
Solutions.

Aggravated by Exposure:Persons with Pre-existing Skin Disorders or Eye Problems or Impaired Respiratory Function May be More Susceptible to the Effects of the Substance.

May be harmful if swallowed. May cause irritation. Avoid breathing vapors, or dusts. Use with adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash thoroughly after handling. 

 

SKIN:

Remove contaminated clothing. Wash exposed area with soap and
water. if irritation persists, seek medical attention.
 

  EYES: Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally.
Seek Medical Aid.
  INHALATION: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen
 
  INGESTION Give several glasses of milk or water. Vomiting may occur spontaneously, but DO NOT INDUCE! Never give anything by mouth to anunconscious person.

Fire Extinguisher Type: 

Any means suitable for extinguishing
surrounding fire

Fire / Explosion Hazards:  None 
Fire Fighting Procedure: Wear self-contained breathing apparatus and protective
clothing to prevent contact with skin and clothing.

Absorb spill with inert material, then place in a chemical waste container. Neutralize with a weak acid.

Ventilate area of Leak or Spill. Keep Unnecessary and Unprotected People away from the area of Spill. Wear Appropriate Personal Protective Equipment as Specified in Section 7. Contain and Recover Liquid when Possible. Use Non-Sparking Tools and Equipment. Collect Liquid in an Appropriate Container or Absorb with an Inert Material (e.g., Vermiculite, Dry Sand, Earth). Do Not use Combustible Materials, such as Saw Dust. Do Not Flush to Sewer! US Regulations (CERCLA) Require Reporting Spills and Releases to Soil, Water and Air in Excess of Reportable Quantities.

Store in a cool dry place. Do not get in eyes, on skin,or on clothing. Wash thoroughly after handling

Respiratory Protection

 None required

Ventilation
 
 Local 
OTHER Mechanical
Protective Gloves Wear appropriate gloves to prevent skin exposure
EYE PROTECTION Splash Goggles
Other Protective Equipment Wear appropriate clothing to prevent skin exposure
BOILING POINT  ~212°F (100deg C) 
VAPOR PRESSURE  Information not available
MELTING POINT 32deg F (0deg C)
VAPOR DENSITY  Information not available
EVAPORATION RATE Information not available
Appearance /Odors Clear, colorless, odorless liquid
Flash Point Not flammable
Specific Gravity  Appx 1.03 to 1.05
Percent Volatile by >99
Evaporation Standard   
Auto Ignition Temp

Not applicable

Lower Flamm. Limit in Air 

Not applicable

Upper Flamm. Limit in Air  Not applicable
Solubility in Water Completely Miscible with water

  

STABILITY

Stable

CONDITIONS TO AVOID

None known 

MATERIALS TO AVOID

Strong oxidizing agents, metals, acids.

HAZARDOUS DECOMPOSITION PRODUCTS

None

HAZARDOUS POLYMERIZATION

Will Not Occur
Conditions to Avoid  None known

Carcinogenic References: NTP Carcinogen - Known: No, IARC Category- None

Environmental Fate: No Information Found.

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste facility. Although not a listed RCRA hazardous waste, this material may exhibit one or more characteristics of a hazardous waste and require appropriate analysis to determine
specific disposal requirements. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements.

DOT Classification: Not Regulated

DOT Regulations may change from time to time. Please consult the most recent D.O.T. regulations.

Chemical Inventory Status –
Part 1:Ingrdient
Sodium Hydroxide (1310-73-2))
TSCA           Yes
EC               Yes
Japan          YES
Australia      Yes

Chemical Inventory Status –
Part 2:Ingredient
Sodium Hydroxide (1310-73-2)
Korea          Yes
DSL           Yes
NDSL         No
Phil.           Yes

Federal, State & International Regulations –
Part 1: Ingredient.
Sodium Hydroxide (1310-73-2)
RQ             No
TPQ           No
List             NO
Chemical Catg     No

Federal, State &
International Regulations –
Part 2:Ingredient
Sodium Hydroxide (1310-73-2)
CERCLA NO
261.33         No
8(d)             No

Chemical Weapons Convention: No
TSCA 12 (b):No
CDTA:No PURE/LIQUID
SARA 311/312: Acute:YES
Chronic: No
Fire: No
Pressure: No
Reactivity: No
Australian Hazchem Code: 2R
Poison Schedule:S5

Overexposure symtoms: Corrosive effects. Acute-Irritation and burns to skin, eyes, lungs, mucous membranes, and GI tract. Chronic Dermatitis. Conditions aggravated/Target organs: Persons with preexisting skin or eye disorders may be more susceptible.                                                                          

Revisions
 

  NFPA
 
 7/30/2010  0.1  updated msds to 16 section from 10 section msds. STN
  0

The information herein is believed to be accurate and is offered in good faith for the user's consideration and investigation. No warranty either expressed or implied is made for the completeness or accuracy of the information whether originating from the above mentioned company or not. Users of this material should satisfy themselves by independent investigation of current scientific and medical knowledge that the material

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Request the signed SDS as PDF

Availability

SODIUM HYDROXIDE Customized soln manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of SODIUM HYDROXIDE Customized soln at a competitive price from us. We have ready stock of SODIUM HYDROXIDE Customized soln in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Our stock points and branches