SODIUM META BORATE TETRAHYDRATE LR
SODIUM METABORATE TETRAHYDRATE LR
- Part number
- RXSOL-60-6605-534
- Category
- Lab Chemical
- Brand
- RXSOL
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | SODIUM META BORATE TETRAHYDRATE LR |
| Part Number | RXSOL-60-6605-534 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA
| Phone | +91 22 20871200 - 1400 |
| Fax | +91 22 27612100 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com | |
| Website | www.rxmraine.com |
| Chemical Name | CAS | EC number | Weight | Formula |
| SODIUM META BORATE TETRAHYDRATE LR | 10555-76-7 | 231-891-6 | 100 % | BNaO2 4H2O |
| Signal Word | Warning |
| Hazard Statements | H361d Suspected of damaging the unborn child. |
| P280 Wear protective gloves.P305 + P351 + P338 | Wear protective gloves/ protective clothing/ eye protection/ face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. |
| Precautionary statements - response |
P202 Do not handle until all safety precautions have been read and understood.
P264 Wash skin thoroughly after handling. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308 + P313 IF exposed or concerned: Get medical advice/ attention. P337 + P313 If eye irritation persists: Get medical advice/ attention
|
| Supplemental Hazard Statements | None |
| Other hazards |
This substance/mixture contains no components considered to be either persistent,
bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
|
| General advice | Show this material safety data sheet to the doctor in attendance |
| If inhaled | After inhalation: fresh air. Call in physician |
| Eye Contact | After eye contact: rinse out with plenty of water. Call in ophthalmologist. Remove contact lenses. |
| Skin Contact | In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower. Consult a physician. |
| If swallowed | After swallowing: immediately make victim drink water (two glasses at most). Consult a physician. |
| Most important symptoms and effects, both acute and delaye |
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11
2.2) and/or in section 11The most important known symptoms and effects are described in the labelling (see section
2.2) and/or in section 11
|
| Indication of any immediate medical attention and special treatment needed | No data available |
| Suitable extinguishing media | Use extinguishing measures that are appropriate to local circumstances and the surrounding environment |
| Unsuitable extinguishing media | For this substance/mixture no limitations of extinguishing agents are given |
| Special hazards arising from the substance or mixture |
Borane/boron oxides
Sodium oxides
Not combustible.
Ambient fire may liberate hazardous vapours.
|
| Further information | Suppress (knock down) gases/vapors/mists with a water spray jet. Prevent fire extinguishing water from contaminating surface water or the ground water system. |
| Advice for firefighters | Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing |
| Personal precautions, protective equipment and emergency procedures | Advice for non-emergency personnel: Avoid inhalation of dusts. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert. For personal protection see section 8. |
| Personal Protection | Advice for non-emergency personnel: Avoid inhalation of dusts. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert. For personal protection see section 8. |
| Enviromental Precaution | Do not let product enter drains. |
|
Methods and materials for containment and cleaning |
Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up dry. Dispose of properly. Clean up affected area. Avoid generation of dusts. |
| Reference to other sections | For disposal see section 13. |
| Precautions for safe handling | For precautions see section 2.2. |
| Conditions for safe storage, including any incompatibilities | Storage conditions Tightly closed. Dry. Storage class Storage class (TRGS 510): 11: Combustible Solids |
| Storage conditions | Tightly closed. Keep away from heat and sources of ignition. Keep locked up or in an area accessible only to qualified or authorized persons. Light sensitive. Moisture sensitive. |
| Storage conditions | Tightly closed. Dry. |
| Storage class | Storage class (TRGS 510): 11: Combustible Solids |
| Specific end use(s) | Apart from the uses mentioned in section 1.2 no other specific uses are stipulated |
| Exposure controls | Personal protective equipment |
| Control parameters | Ingredients with workplace control parameters |
| Eye/face protection |
Use equipment for eye protection tested and approved under appropriate
government standards such as NIOSH (US) or EN 166(EU). Safety glassesUse equipment for eye protection tested and approved under appropriate
government standards such as NIOSH (US) or EN 166(EU). Safety glasses
|
| Body Protection | protective clothing |
| Skin protection |
This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other
substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell,internet: www.kcl.de). Full contact Material: Nitrile rubber Minimum layer thickness: 0,11 mmBreak through time: 480 min Material tested:KCL 741 Dermatril® L This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de). Splash contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested:KCL 741 Dermatril® L
|
| Respiratory protection |
required when dusts are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter type: Filter type P3 The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory
protective devices are carried out according to the instructions of the producer. These measures have to be properly documented
|
| Control of environmental exposure | Do not let product enter drains |
Gloves Suit
| Physical state | solid |
| Colour | No data available |
| Odour | No data available |
| Odor Threshold | Not Applicable |
| pH | Not Applicable |
| Viscosity |
Viscosity, kinematic: No data available
Viscosity, dynamic: No data available
|
| Melting Point | No data available |
| Boiling Point | No data available |
| Flash Point | No data available |
| Evaporation Rate | Not Applicable |
| Flammability (solid, gas) | No data available |
| Explosive limits | No Data Available |
| Upper/lower flammability or explosive limits | No data available |
| Autoignition temperature | No data available |
| Decomposition temperature | No data available |
| Vapour pressure | No Data Available |
| Density | No data available |
| Vapour Density | No Data Available |
| Specific Gravity | No data available |
| Partition coefficient | No data available |
| Explosive properties | None |
| Ignition temperature | No information available. |
| Particle characteristics | No data available |
| Reactivity | No data available |
| Chemical stability | The product is chemically stable under standard ambient conditions (room temperature |
| Possibility of hazardous reactions | No data available |
| Conditions to avoid | No data available |
| Incompatible materials | No data available |
| Hazardous Polymerization | In the event of fire: see section 5 |
| Acute toxicity | Acute toxicity LD50 Oral - Rat - 4.233 mg/kg Remarks: (External MSDS) Symptoms: Nausea, Vomiting Inhalation: No data available LD50 Dermal - Rat - > 2.000 mg/kg Remarks: (External MSDS) |
| Skin corrosion/irritation | Skin - Rabbit Result: No skin irritation Remarks: (External MSDS) |
| Serious eye damage/eye irritation | Eyes - Rabbit Result: slight irritation Remarks: (External MSDS) |
| Respiratory or skin sensitization | Sensitisation test: - Guinea pig Result: negative (OECD Test Guideline 406) |
| Serious eye damage/eye irritation | Eyes - Rabbit Result: slight irritation Remarks: (External MSDS) |
| Germ cell mutagenicity | Test Type: Mutagenicity (mammal cell test): Result: positive Remarks: (Lit.) Test Type: Mutagenicity (mammal cell test): micronucleus. |
| Reproductive toxicity | No data available |
| Specific target organ toxicity - single exposure | No data available |
| Additional Information | To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. Symptoms of an acute molybdenum(VI) intoxication: diarrhoea, anaemia (decreased haemoglobin concentration in the blood), fatigue. Toxic effect on liver and kidneys after high doses. However, when the product is handled appropriately, hazardous effects are unlikely to occur. Handle in accordance with good industrial hygiene and safety practice. |
| Persistence and degradability | The methods for determining the biological degradability are not applicable to inorganic substances. |
| Bioaccumulative potential | No data available |
| Toxicity to fish | NOEC - Oncorhynchus mykiss (rainbow trout) - 3.200 mg/l - 96 h Remarks: (External MSDS |
| Toxicity to algae | NOEC - Pseudokirchneriella subcapitata (green algae) - 4,6 mg/l - 72 h Remarks: (External MSDS) |
| Results of PBT and vPvB assessment | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
| Other adverse effects | No data available |
| Waste treatment Method | Product See www.retrologistik.com for processes regarding the return of chemicals and containers, or contact us there if you have further questions. |
| UN number |
ADR/RID: IMDG: IATA: |
| UN proper shipping name |
ADR/RID: Not dangerous goods IMDG: Not dangerous goods |
| Transport hazard class(es) |
ADR/RID: IMDG: IATA: |
| Packaging group |
ADR/RID: IMDG: IATA: |
| Environmental hazards |
ADR/RID: No IMDG: No IATA: No |
| Special precautions for user | No data available |
| Further information | Not classified as dangerous in the meaning of transport regulations. |
| Safety, health and environmental regulations/legislation specific for the substance or mixture | This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006 |
| Chemical Safety Assessment | For this product a chemical safety assessment was not carried out. |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and weassume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
|
PALLADIUM ACETATE RXSOL-60-6605-160
PALLADIUM HYDROXIDE 20% ON CHARCOAL RXSOL-60-6605-163
PALLADIUM NITRATE 44% PD content RXSOL-60-6605-164
PALLADIUM SPONGE 99.9% POWDER RXSOL-60-6605-165
PALLADIUM CALCIUM CARBONATE 10% pd RXSOL-60-6605-166
PARAFFIN WAX 58 60C BLOCK BRICKS RXSOL-60-6605-180
P DIMETHYL AMINO BENZALDEHYDE AR RXSOL-60-6605-192
P DIMETHYL AMINO CINNAMALDEHYDE AR RXSOL-60-6605-193
PEPTONE BACTERIOLOGICAL GRANULAR RXSOL-60-6605-197
PETROLEUM ETHER 100-2000 C FOR SYNTHESIS RXSOL-60-6605-205
PHENOL RED INDICATOR SOLUTION RXSOL-60-6605-215
PHENOLDISULPHONIC ACID SOLUTION 25% RXSOL-60-6605-216
PHENOLPHTHALEIN INDICATOR RXSOL-60-6605-218
PHENYL CHLOROFORMATE FOR SYNTHESIS RXSOL-60-6605-219
PHENYL HYDRAZINE AR RXSOL-60-6605-220
PHENYL HYDRAZINE FOR SYNTHESIS RXSOL-60-6605-221
PHENYL HYDRAZINE HYDROCHLORIDE AR RXSOL-60-6605-223
PHENYL MERCURY ACETATE FOR SYNTHESIS RXSOL-60-6605-224
PHENYL PHOSPHATE DISODIUM SALT AR RXSOL-60-6605-226
PHENYL TRIMETHYL AMMONIUM CHLORIDE RXSOL-60-6605-227
PHLOXIN B FOR MICROSCOPY RXSOL-60-6605-229
PHTHALAMIDE FOR SYNTHESIS RXSOL-60-6605-237
PHTHALIC ACID AR RXSOL-60-6605-238
PHTHALIC ACID FOR SYNTHESIS RXSOL-60-6605-239
PHTHALIC ANHYDRIDE FOR SYNTHESIS RXSOL-60-6605-249
PHTHALIDE FOR SYNTHESIS RXSOL-60-6605-250
PHTHALIMIDE FOR SYNTHESIS RXSOL-60-6605-251
PICRIC ACID SOLUTION AR 1.2% RXSOL-60-6605-256
PIPERAZINE Anhydrous 98% RXSOL-60-6605-257
PIPERAZINE Anhydrous 98% RXSOL-60-6605-257
PIPES BUFFER piperazine NN-Bis-2-Ethene Sulfonic acid RXSOL-60-6605-260
PLATINIUM OXIDE Pt 80% RXSOL-60-6605-261
POLYETHYLENE GLYCOL 600 RXSOL-60-6605-269
POLYVINYL PYRROLIDONE PVP RXSOL-60-6605-241
PONCEAU S FOR ELECTROPHORESIS RXSOL-60-6605-242
POPOP Scintillation Grade 1 4-bis5-phenyloxaza-2yl benzene RXSOL-60-6605-243
POPSO BUFFER FOR BIOCHEMISTRY RXSOL-60-6605-244
POTASSIUM ACETATE AR RXSOL-60-6605-245
POTASSIUM ACETATE LR RXSOL-60-6605-246
SODAMIDE RXSOL-60-6605-451
SODIUM ACETATE TRIHYDRATE AR RXSOL-60-6605-462
SODIUM ARSENITE SOLUTION AR 0.1N N10 RXSOL-60-6605-468
SODIUM BENZOATE AR RXSOL-60-6605-472
SODIUM BISELENITE Sodium Hydrogen Selenite RXSOL-60-6605-473
SODIUM BROMATE LR RXSOL-60-6605-481
SODIUM BROMIDE AR RXSOL-60-6605-482
SODIUM BROMIDE LR RXSOL-60-6605-483
SODIUM CHLORIDE SOLUTION0 85% wv RXSOL-60-6605-488
SODIUM CHROMATE TETRAHYDRATE LR RXSOL-60-6605-490
SODIUM DI CHLOROISOCYANURATE RXSOL-60-6605-495
SODIUM HYDROXIDE SOLUTION IN 1M N1 RXSOL-60-6605-519
SODIUM LAURYL SULPHATE AR 99% RXSOL-60-6605-529
SODIUM LAURYL SULPHATE POWDER LR RXSOL-60-6605-531
SODIUM META BORATE TETRAHYDRATE LR RXSOL-60-6605-534
SODIUM METHOXIDE AR RXSOL-60-6605-535
SODIUM METHOXIDE POWDER LR RXSOL-60-6605-536
SODIUM MOLYBDATE AR DIHYDRATE RXSOL-60-6605-537
SODIUM NITRITE AR RXSOL-60-6605-541
SODIUM NITRITE LR RXSOL-60-6605-542
SODIUM NITRO PRUSIDE AR RXSOL-60-6605-543
SODIUM NITRO PRUSIDE LR RXSOL-60-6605-544
SODIUM OXALATE AR RXSOL-60-6605-545
SODIUM PERBORATE TRIHYDRATE PURE RXSOL-60-6605-548
SODIUM PER CARBONATE GRANULAR RXSOL-60-6605-549
SODIUM PER CARBONATE TABLET RXSOL-60-6605-550
SODIUM PERSULPHATE AR RXSOL-60-6605-553
SODIUM PERSULPHATE LR RXSOL-60-6605-554
SODIUM PHOSPHATE DI BASIC DIHYDRATE RXSOL-60-6605-559
SODIUM PYRUVATE RXSOL-60-6605-562
SODIUM SALICYLATE AR RXSOL-60-6605-563
SODIUM SELENITE AR ANHYDROUS RXSOL-60-6605-566
SODIUM SELENITE LR ANHYDROUS RXSOL-60-6605-567
SODIUM SELENITE PENTAHYDRATE LR RXSOL-60-6605-568
SODIUM SILICATE POWDER META HYDRATED RXSOL-60-6605-569
SODIUM SILICATE SOLUTION RXSOL-60-6605-570
SODIUM SILICO FLUORIDE 99% RXSOL-60-6605-571
SODIUM STANNATE LR RXSOL-60-6605-572
SODIUM SULPHATE ANHYDROUS AR RXSOL-60-6605-573
SODIUM SULPHIDE FLAKES AR RXSOL-60-6605-576
SODIUM SULPHITE ANHYDROUS AR RXSOL-60-6605-577
SODIUM SULPHITE ANHYDROUS LR RXSOL-60-6605-578
SODIUM TELLURITE 96% RXSOL-60-6605-579
SODIUM Tert BUTOXIDE 98% RXSOL-60-6605-580
SODIUM THIOCYANATE AR RXSOL-60-6605-581
SODIUM THIOSULPHATE AR PENTAHYDRATE RXSOL-60-6605-583
SODIUM TRI POLYPHOSPHATE ANHYDROUS STPP RXSOL-60-6605-585
SODIUM TUNGSTATE DIHYDRATE RXSOL-60-6605-586
SODIUM TUNGSTATE DIHYDRATE AR RXSOL-60-6605-587
SODIUM B GLYCERO PHOSPHATE AR RXSOL-60-6605-588
SOYA LECITHIN 30% RXSOL-60-6605-592
SOYA PEPTONE SOYATONE RXSOL-60-6605-593
SPADNS AR RXSOL-60-6605-595
SPAN 20 Sorbitan Monolaurate RXSOL-60-6605-596
SPAN 60 Sorbitane Monostearate RXSOL-60-6605-598
SPAN 80 SORBITANE MONOOLEATE RXSOL-60-6605-599
STANNIC OXIDE AR RXSOL-60-6605-601
STANNIC OXIDE LR RXSOL-60-6605-602
Availability
SODIUM META BORATE TETRAHYDRATE LR manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of SODIUM META BORATE TETRAHYDRATE LR at a competitive price from us. We have ready stock of SODIUM META BORATE TETRAHYDRATE LR in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
