SODIUM SILICATE POWDER META HYDRATED
- Part number
- RXSOL-60-6605-569
- Category
- Lab Chemical
- Brand
- RXSOL
Overview
Sodium silicates are colorless glassy or crystalline solids, or white powders. Sodium silicates are stable in neutral and alkaline solutions. In acidic solutions, the silicate ions react with hydrogen ions to form silicic acids, which tend to decompose into hydrated silicon dioxide gel.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | SODIUM SILICATE POWDER META HYDRATED |
| Part Number | RXSOL-60-6605-569 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA
| Phone | +91 22 20871200 - 1400 |
| Fax | +91 22 27612100 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com | |
| Website | www.rxmraine.com |
| Chemical Name | Cas No | EC No | Whight | Formula |
| Disodium metasilicate nonahydrate | 13517-24-3 | 229-912-9 | <= 100 % | Na2O3Si · 9H2O |
| Signal Word | Danger |
| Hazard Statements | H290 May be corrosive to metals. H314 Causes severe skin burns and eye damage. H335 May cause respiratory irritation. |
| Precautionary statements | P234 Keep only in original packaging. P260 Do not breathe dust. P271 Use only outdoors or in a well-ventilated area. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection. P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. |
| Classification of the substance or mixture | Not a hazardous substance or mixture according to Regulation (EC) No 1272/2008. |
| Supplemental Hazard Statements | None. |
| Other hazards | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. Lachrymator. |
| General advice | First aiders need to protect themselves. Show this material safety data sheet to the doctor in attendance. |
| If inhaled | After inhalation: fresh air. Call in physician. |
| Eye Contact | After eye contact: rinse out with plenty of water. Immediately call in ophthalmologist. Remove contact lenses. |
| Swallowed | After swallowing: make victim drink water (two glasses at most), avoid vomiting (risk of perforation). Call a physician immediately. Do not attempt to neutralise. |
| Skin Contact | In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower. Call a physician immediately. |
| Inhalation | Move casualty to fresh air and keep at rest. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. Get medical attention if necessary. |
| Ingestion | Do Not Induce Vomiting! Never give anything by mouth to an unconscious person. If conscious, wash out mouth with water. Get medical attention if necessary. |
| Most important symptoms and effects, both acute and delaye | The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 |
| Indication of any immediate medical attention and special treatment needed | No data available |
| Flammability | May be combustible at high temperature. |
| Suitable extinguishing media | Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. |
| Unsuitable extinguishing media | For this substance/mixture no limitations of extinguishing agents are given. |
| Special hazards arising from the substance or mixture | Sodium oxides silicon oxides Not combustible. Ambient fire may liberate hazardous vapours. |
| Further information | Suppress (knock down) gases/vapors/mists with a water spray jet. Prevent fire extinguishing water from contaminating surface water or the ground water system. |
|
Hazardous combustion products |
Fire may cause the evolution of Sulphur oxides, nitrogen oxides. |
| Advice for firefighters | Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing. |
| Protective Equipment | Use personal protective equipment. |
| Specific Hazards Arising from the Chemical | Emits toxic fumes (iron oxides, sulfur oxides) under fire conditions. (See also Stability and Reactivity section). |
| Personal precautions, protective equipment and emergency procedures | Advice for non-emergency personnel: Avoid inhalation of dusts. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert. For personal protection see section 8. |
| Spillage | Oxidizing material. Stop leak if without risk. Avoid contact with a combustible material (wood, paper, oil, clothing...). Keep substance damp using water spray. Do not touch spilled material. Prevent entry into sewers, basements or confined areas dike if needed. Eliminate all ignition sources. Call for assistance on disposal. |
| Personal Protection | Advice for non-emergency personnel: Avoid inhalation of dusts. Evacuate the danger area, observe emergency procedures, consult an expert. Advice for emergency responders: Protective equipment see section 8. |
| Enviromental Precaution | Do not let product enter drains. |
|
Methods and materials for containment and cleaning |
Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up dry. Dispose of properly. Clean up affected area. Avoid generation of dusts. |
| Reference to other sections | For disposal see section 13. |
| Advice on protection against fire and explosion | Provide appropriate exhaust ventilation at places where dust is formed. |
| Incompatible materials | Keep away from alkalis, strong oxidizing agents and metals. Provide containment walls of adequate capacity to hold any accidental spills. |
| Hygiene measures | General industrial hygiene practice. For precautions see section 2.2. |
| Precautions for safe handling | See section 8 for recommendations on the use of personal protective equipment. Use with adequate ventilation. Wash thoroughly after using. Keep container closed when not in use. Avoid formation of dusts. |
| Conditions for safe storage, including any incompatibilities | Store in cool, dry well ventilated area. Keep away from incompatible materials (see section 10 for incompatibilities). |
| Storage conditions | No metal containers. Tightly closed. Dry. Hygroscopic. |
| Storage class | Storage class (TRGS 510): 8B: Non-combustible, corrosive hazardous materials |
| Specific end use(s) | Apart from the uses mentioned in section 1.2 no other specific uses are stipulated |
| Advice on general occupational hygiene | Advice on safe handling Observe label precautions. Change contaminated clothing. Wash hands after working with substance. |
| Exposure controls | No specific additional engineering controls are required. Provide good natural or artificial ventilation. |
| Engineering Control | Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit. |
| Eye/face protection | Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Tightly fitting safety goggles |
| Body Protection | Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place., The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. |
| Skin protection | This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de). Full contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested:KCL 741 Dermatril® L This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de). Splash contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested:KCL 741 Dermatril® L |
| Respiratory protection | Required when dusts are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter type: Filter type P2 The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented. |
| Other Protection Measure | Provide eyewash stations, quick-drench showers and washing facilities accessible to areas of use and handling. |
| Control of environmental exposure | Do not let product enter drains. |
| Physical state | Solid |
| Colour | White |
| Odour | Odorless |
| Odor Threshold | Not Applicable |
| pH | 12,4 at 10 g/l |
| Melting Point | No data available |
| Boiling Point | No data available |
| Flash Point | No data available |
| Evaporation Rate | Not Applicable |
| Flammability (solid, gas) | No data available |
| Explosive limits | No Data Available |
| Upper/lower flammability or explosive limits | No data available |
| Autoignition temperature | No data available |
| Decomposition temperature | No data available |
| Vapour pressure | No data available |
| Density | No data available |
| Relative Density | No data available |
| Freezing point | No data available |
| Specific Gravity | No data available |
| Partition coefficient | log Pow: -5,65 |
| Explosive properties | No data available |
| Solubility | 210 g/l at 20 °C soluble |
| Ignition temperature | No information available. |
| Particle characteristics | No data available |
| Reactivity | No data available |
| Chemical stability | The product is chemically stable under standard ambient conditions (room temperature) . |
| Possibility of hazardous reactions |
A risk of explosion and/or of toxic gas formation exists with the following substances:
Acids
Generates dangerous gases or fumes in contact with:
Acids
|
| Conditions to avoid | no information available |
| Incompatible materials | No data available |
| Hazardous decomposition products | In the event of fire: see section 5 |
| Acute toxicity |
LD50 Oral - Rat - 7 mg/kg
Remarks: Behavioral:Somnolence (general depressed activity).
Lungs, Thorax, or Respiration:Dyspnea.
Diarrhea
(RTECS)
LC50 Inhalation - Rat - male and female - 4 h - > 0,052 - 0,51 mg/l - dust/mist
(OECD Test Guideline 403)
Dermal: No data available
|
| Skin corrosion/irritation |
Skin - human keratinocytes
Result: irritating
(OECD Test Guideline 439)
|
| Serious eye damage/eye irritation |
Remarks: No data available
|
| Respiratory or skin sensitization | Local lymph node assay (LLNA) - Mouse Result: negative (OECD Test Guideline 429) |
| Carcinogenicity | No data available |
| Germ cell mutagenicity |
Test Type: Ames test
Test system: Salmonella typhimurium
Metabolic activation: with and without metabolic activation
Method: OECD Test Guideline 471
Result: negative
Test Type: Chromosome aberration test in vitro
Test system: Chinese hamster fibroblasts
Metabolic activation: with and without metabolic activation
Method: OECD Test Guideline 473
Result: negative
Test Type: gene mutation test
Test system: mouse lymphoma cells
Metabolic activation: with and without metabolic activation
Method: OECD Test Guideline 476
Result: negative
Test Type: Mutagenicity (mammal cell test): chromosome aberration.
Species: Mouse
Cell type: Bone marrow
Application Route: Intraperitoneal
Result: negative
Remarks: (ECHA
|
| Reproductive toxicity | No data available |
| Specific target organ toxicity - single exposure | No data available |
| Specific target organ toxicity - repeated exposure | No data available |
|
Endocrine disrupting properties
Product:
|
Assessment : The substance/mixture does not contain
components considered to have endocrine
disrupting properties according to REACH Article
57(f) or Commission Delegated regulation (EU)
2017/2100 or Commission Regulation (EU)
2018/605 at levels of 0.1% or higher.
RTECS: VS7350000
Salivation, Tremors, Alopecia., Vomiting, Dermatitis
To the best of our knowledge, the chemical, physical, and toxicological properties have not
been thoroughly investigated.
The following applies to selenium compounds in general: strong irritant effect on mucous
membranes, especially in the eye and in the respiratory tract (bronchopneumonia,
pulmonary oedema); selenium acts as an enzyme toxin already after the absorption of
small doses; typical garlic odour of perspiration and breath; dermatitis is possible; longterm exposure results in impairments in the intermediary metabolism; toxic effect on liver,
kidneys, urinary tract, gastrointestinal tract, spleen, bone marrow, heart, nerves (paralysis
symptoms). Selenium is an essential trace element for man.
After absorption:
Other dangerous properties can not be excluded.
We have no description of any toxic symptoms.
This substance should be handled with particular care.
|
| Aspiration hazard | No data available |
| Toxicity |
Toxicity to fish LC50 - Pimephales promelas (fathead minnow) - 1,7 mg/l - 96 h
Remarks: (ECOTOX Database)
Toxicity to daphnia
and other aquatic
invertebrates
static test EC50 - Daphnia magna (Water flea) - 1,1 mg/l - 48 h
Remarks: (ECOTOX Database)
Toxicity to
fish(Chronic toxicity)
NOEC - Oncorhynchus mykiss (rainbow trout) - 0,16 mg/l - 30 d
Toxicity to daphnia
and other aquatic
invertebrates(Chronic
toxicity)
NOEC - Daphnia magna (Water flea) - 0,24 mg/l - 21 d
Remarks: (ECOTOX Database)
|
|
Persistence and degradability
|
The methods for determining biodegradability are not applicable to inorganic substances. |
| Bioaccumulative potential |
Bioaccumulation Lepomis macrochirus - 120 d
- 10 µg/l(Sodium selenite)
Bioconcentration factor (BCF): 1.850
|
|
Mobility in soil
|
No data available |
|
Results of PBT and vPvB assessment
|
This substance/mixture contains no components considered to be either persistent,
bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at
levels of 0.1% or higher.
|
| Products Biodegradation | The methods for determining the biological degradability are not applicable to inorganic substances. |
| Mobility in soil | No Information available |
| Results of PBT and vPvB assessment | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
| Endocrine disrupting properties |
Assessment : The substance/mixture does not contain components
considered to have endocrine disrupting properties
according to REACH Article 57(f) or Commission
Delegated regulation (EU) 2017/2100 or Commission
Regulation (EU) 2018/605 at levels of 0.1% or higher.
|
| Other adverse effects | No data available |
| Waste treatment Method | No data available |
| UN number | ADR/RID: 2630 IMDG: 2630 IATA: 2630 |
| UN proper shipping name |
ADR/RID: SELENITES (Sodium selenite)
IMDG: SELENITES (Sodium selenite)
IATA: Selenites (Sodium selenite)
|
| Transport hazard class(es) |
ADR/RID: SELENITES (Sodium selenite)
IMDG: SELENITES (Sodium selenite)
IATA: Selenites (Sodium selenite)
|
| Packaging group |
ADR/RID: I IMDG: I IATA: I
|
| Environmental hazards | ADR/RID: yes IMDG Marine pollutant: yes IATA: no |
| Special precautions for user |
Tunnel restriction code : (C/E)
Further information : No data available
|
| Safety, health and environmental regulations/legislation specific for the substance or mixture | This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006. |
| Other regulations |
Observe work restrictions regarding maternity protection in accordance to Dir 92/85/EEC or
stricter national regulations where applicable.
Take note of Dir 94/33/EC on the protection of young people at work.
|
| Chemical Safety Assessment | For this product a chemical safety assessment was not carried out. |
| National legislation |
Seveso III: Directive 2012/18/EU of the
European Parliament and of the Council
on the control of major-accident hazards
involving dangerous substances.
H2 ACUTE TOXIC
E2 ENVIRONMENTAL HAZARDS
|
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and weassume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |
Availability
SODIUM SILICATE POWDER META HYDRATED manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of SODIUM SILICATE POWDER META HYDRATED at a competitive price from us. We have ready stock of SODIUM SILICATE POWDER META HYDRATED in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
