SODIUM TRI POLYPHOSPHATE ANHYDROUS STPP
- Part number
- RXSOL-60-6605-585
- Category
- Lab Chemical
- Brand
- RXSOL
Overview
STPP is a colorless salt, which exists as anhydrous and also as hexahydrate. Its wide spread use is well known in detergent industries.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | SODIUM TRI POLYPHOSPHATE ANHYDROUS STPP |
| Part Number | RXSOL-60-6605-585 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA
| Phone | +91 22 20871200 - 1400 |
| Fax | +91 22 27612100 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com | |
| Website | www.rxmraine.com |
| Chemical Name | CAS | EC number | Weight | Formula |
| Sodium tripolyphosphate | 7758-29-4 | 231-838-7 | <= 100 % | Na5O10P3 |
|
Classification of the substance or mixture
|
Not a hazardous substance or mixture according to Regulation (EC) No 1272/2008. |
| Label elements | Not a hazardous substance or mixture according to Regulation (EC) No 1272/2008. |
|
Other hazards
|
This substance/mixture contains no components considered to be either persistent,
bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at
levels of 0.1% or higher.
|
| If inhaled | After inhalation: fresh air |
| In case of skin contact |
In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with
water/ shower
|
| In case of eye contact | After eye contact: rinse out with plenty of water. Remove contact lenses. |
| If swallowed |
After swallowing: make victim drink water (two glasses at most). Consult doctor if feeling
unwell.
|
| Most important symptoms and effects, both acute and delayed |
.The most important known symptoms and effects are described in the labelling (see section
2.2) and/or in section 11
|
| Indication of any immediate medical attention and special treatment needed | No data available |
| Suitable extinguishing media |
Use extinguishing measures that are appropriate to local circumstances and the
surrounding environment.
|
| Unsuitable extinguishing media | For this substance/mixture no limitations of extinguishing agents are given. |
| Unsuitable extinguishing media | For this substance/mixture no limitations of extinguishing agents are given.. |
|
Special hazards arising from the substance or mixture
|
Oxides of phosphorus
Sodium oxides
Not combustible.
Ambient fire may liberate hazardous vapours.
|
| Advice for firefighters | In the event of fire, wear self-contained breathing apparatus. |
| Further information |
Suppress (knock down) gases/vapors/mists with a water spray jet. Prevent fire
extinguishing water from contaminating surface water or the ground water system
|
| Personal precautions, protective equipment and emergency procedures |
Advice for non-emergency personnel: Avoid inhalation of dusts. Evacuate the danger
area, observe emergency procedures, consult an expert.
For personal protection see section 8
|
| Enviromental Precaution | Do not let product enter drains. |
|
Methods and materials for containment and cleaning |
Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions
(see sections 7 and 10). Take up dry. Dispose of properly. Clean up affected area. Avoid
generation of dusts.
|
| Reference to other sections | For disposal see section 13. |
| Precautions for safe handling | For precautions see section 2.2. |
| Conditions for safe storage, including any incompatibilities | Store the container tightly closed in a dry, cool and well-ventilated place. Store apart from foodstuff containers or incompatible materials. |
| Storage conditions | Tightly closed. Dry. hygroscopic |
| Specific end use(s) | Apart from the uses mentioned in section 1.2 no other specific uses are stipulated |
| Eye/face protection |
Use equipment for eye protection tested and approved under appropriate
government standards such as NIOSH (US) or EN 166(EU). Safety glasses
|
| Body Protection | Protective clothing. |
| Skin protection |
This recommendation applies only to the product stated in the safety data sheet,
supplied by us and for the designated use. When dissolving in or mixing with other
substances and under conditions deviating from those stated in EN374 please
contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell,
Internet: www.kcl.de).
SIGALD- 238503 Page 4 of 9
The life science business of Merck operates as MilliporeSigma in
the US and Canada
Full contact
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min
Material tested:KCL 741 Dermatril® L
This recommendation applies only to the product stated in the safety data sheet,
supplied by us and for the designated use. When dissolving in or mixing with other
substances and under conditions deviating from those stated in EN374 please
contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell,
Internet: www.kcl.de).
Splash contact
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min
Material tested:KCL 741 Dermatril® L
|
| Respiratory protection |
required when dusts are generated.
Our recommendations on filtering respiratory protection are based on the following
standards: DIN EN 143, DIN 14387 and other accompanying standards relating to
the used respiratory protection system.
Recommended Filter type: Filter type P1
The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory
protective devices are carried out according to the instructions of the producer.
These measures have to be properly documented.
|
| Control of environmental exposure | Do not let product enter drains. |
| Appearance |
Form: granules
Color: white
|
| Odor |
No data available
|
| Odor Threshold | No data available |
| Odor Threshold |
No data available
|
| pH | 9,5 - 10,3 at 1 g/l |
|
Melting
point/freezing point
|
Melting point/range: 622 °C |
|
Initial boiling point
and boiling range
|
No data available |
| Flash Point | Not Applicable |
| Evaporation Rate |
No data available
|
| Flammability (solid, gas) | No data available |
| Explosive limits | No Data Available |
|
Upper/lower
flammability or
explosive limits
|
No data available |
| Vapor pressure | No data available |
| Vapor density | No data available |
| Relative density |
2,55 at 21 °C - Regulation (EC) No. 440/2008, Annex, A.3
|
| Water solubility |
148 g/l at 20 °C - Regulation (EC) No. 440/2008, Annex, A.6-
completely soluble
|
|
Partition coefficient:
n-octanol/water
|
Not applicable for inorganic substances |
|
Autoignition
temperature
|
No data available |
|
Decomposition
temperature
|
No data available |
| Viscosity |
Viscosity, kinematic: No data available
Viscosity, dynamic: No data available
|
| Explosive properties | No data available |
| Oxidizing properties | No data available |
|
Other safety information
Dissociation constan
|
9,52 at 25 °C
- OECD Test Guideline 112
|
| Reactivity | No data available |
| Chemical stability | The product is chemically stable under standard ambient conditions (room temperature) . |
| Possibility of hazardous reactions | No data available |
| Conditions to avoid | Avoid moisture. no information available |
| Incompatible materials | No data available |
| Hazardous Polymerization | In the event of fire: see section 5 |
| Acute toxicity | LD50 Oral - Rat - male and female - > 2.000 mg/kg (OECD Test Guideline 401) LC50 Inhalation - Rat - male and female - 4 h - > 0,39 mg/l (US-EPA) LD50 Dermal - Rabbit - > 4.640 mg/kg Remarks: (ECHA) |
| Skin corrosion/irritation | Skin - Rabbit Result: No skin irritation - 4 h (OECD Test Guideline 404) Remarks: (IUCLID) |
| Serious eye damage/eye irritation | Eyes - Rabbit Result: No eye irritation (OECD Test Guideline 405) Remarks: (IUCLID) |
| Respiratory or skin sensitization | Local lymph node assay (LLNA) - Mouse Result: negative (OECD Test Guideline 429) |
| Carcinogenicity | No ingredient of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC. |
| Germ cell mutagenicity | Ames test Escherichia coli/Salmonella typhimurium Result: negative Remarks: (IUCLID) Mutagenicity (mammal cell test): chromosome aberration. Chinese hamster lung cells Result: negative Remarks: (ECHA) OECD Test Guideline 475 Rat - male - Bone marrow Result: negative |
| Reproductive toxicity | No data available |
| Specific target organ toxicity - single exposure | May cause damage to organs through prolonged or repeated exposure. - Kidney |
| Special Remarks on other Toxi Effects on Humans | Acute Potential Health Effects: Skin: Causes skin irritation. May cause skin sensitization, an allergic reation, which becomes evident upon re-exposure to this material. Eyes: Causes eye irritation. Ingestion: Causes gastrointestinal (digestive) tract irritation with nausea, vomiting, and diarrhea. May be harmful if swallowed. Inhalation: Causes respiratory tract irritation. May cause chemical pneumonitis and pulmonary edema, inflammation, edema of bronchi and larynx. Chronic Potential Health Effects: Repeated or prolonged skin exposure may cause allergic reactions in sensitive individuals. Repeated or prolonged exposure by inhalation may affect respiration and metabolism. |
| Endocrine disrupting properties | Repeated dose toxicity - Dog - male and female - Oral - NOAEL (No observed adverse effect level) - 100 mg/kgRemarks: (ECHA) RTECS: YK4570000 Gastrointestinal disturbance To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. |
| Aspiration hazard |
No data available
|
| Additional Information | Repeated dose toxicity - Dog - male and female - Oral - NOAEL (No observed adverse effect level) - 100 mg/kgRemarks: (ECHA) SIGALD- 238503 Page 7 of 9 The life science business of Merck operates as MilliporeSigma in the US and Canada RTECS: YK4570000 Gastrointestinal disturbance To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated |
| Toxicity |
Toxicity to fish LC50 - Danio rerio (zebra fish) - > 1.850 mg/l - 24 h
Remarks: (ECHA)
Toxicity to daphnia
and other aquatic
invertebrates
static test EC50 - Daphnia magna (Water flea) - > 100 mg/l - 48 h
Remarks: (ECHA)
Toxicity to algae ErC50 - Desmodesmus subspicatus (green algae) - ca. 160 mg/l - 4
Days
Remarks: (ECHA)
Toxicity to bacteria EC50 - activated sludge - > 1.000 mg/l - 3 h
(OECD Test Guideline 209)
Remarks: (IUCLID)
|
| Persistence and degradability |
The methods for determining biodegradability are not applicable to inorganic substances.
|
| Bioaccumulative potential | No data available |
| Mobility in soil | No Information available |
| Results of PBT and vPvB assessment | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
| Other adverse effects | No data available |
|
Waste treatment methods
Product
|
See www.retrologistik.com for processes regarding the return of chemicals and
containers, or contact us there if you have further questions.
|
| UN number |
ADR/RID: - IMDG: - IATA: -
|
| UN proper shipping name |
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
|
| Transport hazard class(es) | ADR/RID: - IMDG: - IATA: - |
| Packaging group | ADR/RID: - IMDG: - IATA: - |
| Environmental hazards | ADR/RID: no IMDG Marine pollutant: no IATA: no |
|
Special precautions for user
Further information
|
Not classified as dangerous in the meaning of transport regulations. |
| Safety, health and environmental regulations/legislation specific for the substance or mixture |
This material safety data sheet complies with the requirements of Regulation (EC) No.
1907/2006.
REACH - Restrictions on the manufacture,
placing on the market and use of certain
dangerous substances, preparations and articles
(Annex XVII)
: Not applicable
|
| National legislation |
Seveso III: Directive 2012/18/EU of the
European Parliament and of the Council on the
control of major-accident hazards involving
dangerous substances.
: Not applicable
|
| Chemical Safety Assessment | For this product a chemical safety assessment was not carried out |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and weassume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |
Availability
SODIUM TRI POLYPHOSPHATE ANHYDROUS STPP manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of SODIUM TRI POLYPHOSPHATE ANHYDROUS STPP at a competitive price from us. We have ready stock of SODIUM TRI POLYPHOSPHATE ANHYDROUS STPP in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
