SOYA PEPTONE SOYATONE
- Part number
- RXSOL-60-6605-593
- Category
- Lab Chemical
- Brand
- RXSOL
Overview
Soya Peptone is enzymatic digest of soya flour. ... It is a non-animal product and hence soy-based peptones are used when it is necessary to eliminate all animal derived components.
Applications
Characteristics and notes
Exploring economic, scalable, and highly efficient carbon materials for the oxygen reduction reaction (ORR) is of great significance to a variety of renewable energy conversion and storage technologies. Herein, we directly convert soya peptone as a carbon precursor to a series of mesoporous nanocarbon-based materials for the ORR via a one-step pyrolysis process combined with the help of ZnCl2 as an activator.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | SOYA PEPTONE SOYATONE |
| Part Number | RXSOL-60-6605-593 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com | |
| Website | www.rxmarine.com |
| Name of Substance | Cas Number | EC Number | Weight % |
| Xylene | 91079-46-8 | 293-434-7 | 100% |
| Classification of the substance or mixture | Not a hazardous substance or mixture according to Regulation (EC) No 1272/2008. |
|
Label elements |
Not a hazardous substance or mixture according to Regulation (EC) No 1272/2008 |
| Other hazards |
This substance/mixture contains no components considered to be either persistent,
bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at
levels of 0.1% or higher.
|
|
If inhaled
|
After inhalation: fresh air. |
| In case of skin contact |
In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with
water/ shower.
|
| In case of eye contact | After eye contact: rinse out with plenty of water. Remove contact lenses. |
| If swallowed |
After swallowing: make victim drink water (two glasses at most). Consult doctor if feeling
unwell.
|
| Most important symptoms and effects, both acute and delayed |
The most important known symptoms and effects are described in the labelling (see section
2.2) and/or in section 11
|
| Indication of any immediate medical attention and special treatment needed | No data available |
|
Extinguishing media
Suitable extinguishing media
|
Water Foam Carbon dioxide (CO2) Dry powder |
| Unsuitable extinguishing media | . For this substance/mixture no limitations of extinguishing agents are given. |
| Special hazards arising from the substance or mixture |
Nature of decomposition products not known.
Combustible.
Development of hazardous combustion gases or vapours possible in the event of fire.
|
| Advice for firefighters | In the event of fire, wear self-contained breathing apparatus. |
| Further information |
Prevent fire extinguishing water from contaminating surface water or the ground water
system
|
| Personal precautions, protective equipment and emergency procedures |
Advice for non-emergency personnel: Avoid inhalation of dusts. Evacuate the danger
area, observe emergency procedures, consult an expert.
For personal protection see section 8.
|
| Enviromental Precaution | Do not let product enter drains. |
| Methods and materials for containment and cleaning |
Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions
(see sections 7 and 10). Take up dry. Dispose of properly. Clean up affected area. Avoid
generation of dusts.
|
| Reference to other sections | For disposal see section 13. |
| Precautions for safe handling | For precautions see section 2.2. |
|
Conditions for safe storage, including any incompatibilities
Storage conditions
|
Tightly closed. Dry.
hygroscopic Store under inert gas.
|
| Specific end use(s) | Apart from the uses mentioned in section 1.2 no other specific uses are stipulated |
| Control parameters | Ingredients with workplace control parameters |
| Personal Protection |
Eye/face Protection : .Use equipment for eye protection tested and approved under appropriate
government standards such as NIOSH (US) or EN 166(EU). Safety glasses
Skin protection :This recommendation applies only to the product stated in the safety data sheet,
supplied by us and for the designated use. When dissolving in or mixing with other
substances and under conditions deviating from those stated in EN374 please
contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell,
Internet: www.kcl.de).
Full contact
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min
Material tested:KCL 741 Dermatril® L
Sigma-Aldrich- 90765 Page 4 of 7
The life science business of Merck operates as MilliporeSigma in the US and
Canada
This recommendation applies only to the product stated in the safety data sheet,
supplied by us and for the designated use. When dissolving in or mixing with other
substances and under conditions deviating from those stated in EN374 please
contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell,
Internet: www.kcl.de).
Splash contact
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min
Material tested:KCL 741 Dermatril® L Respiratory Protection : required when dusts are generated.
Our recommendations on filtering respiratory protection are based on the following
standards: DIN EN 143, DIN 14387 and other accompanying standards relating to
the used respiratory protection system.
Recommended Filter type: Filter type P1
The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory
protective devices are carried out according to the instructions of the producer.
These measures have to be properly documented.
|
| Control of environmental exposure | Do not let product enter drains. |
Gloves Suit
| Appearance |
Form: solid
Color: beige
|
| Odor | No data available |
| Odor Threshold | No data available |
| pH | No data available |
|
Melting
point/freezing point
|
No data available |
| Initial boiling point and boiling range | Not Applicable |
| Flash point | No data available |
|
Flammability (solid,
gas)
|
No data available |
|
Upper/lower
flammability or
explosive limits
|
No data available |
| Vapor pressure | No data available |
| Vapor density | No data available |
|
Density No data available
Relative density
|
No data available |
| Water solubility | 2.200 g/l at 20 °C - OECD Test Guideline 105- miscible |
|
Partition coefficient:
n-octanol/water
|
No data available |
|
Decomposition
temperature
|
No data available |
| Viscosity |
Viscosity, kinematic: No data available
Viscosity, dynamic: No data available
|
| Explosive properties | No data available |
| Oxidizing properties | No data available |
| Other safety information | No data available |
| Recativity |
The following applies in general to flammable organic substances and mixtures: in
correspondingly fine distribution, when whirled up a dust explosion potential may generally
be assumed.
|
| Chemical stability | The product is chemically stable under standard ambient conditions (room temperature) . |
| Possibility of hazardous reactions | No data available |
| Conditions to avoid |
no information available
|
| Incompatible materials |
No data available
|
| Hazardous Decomposition Products | In the event of fire: see section 5 |
| Acute toxicity | Oral: No data available Inhalation: No data available Dermal: No data available |
| Skin corrosion/irritation | No data available |
| Serious eye damage/eye irritation | No data available |
| Respiratory or skin sensitization | No data available |
| Germ cell mutagenicity | No data available |
| Carcinogenicity | No data available |
| Reproductive toxicity | No data available |
| Specific target organ toxicity - single exposure | No data available |
| Specific target organ toxicity - repeated exposure | No data available |
| Aspiration hazard | No data available |
| Additional Information |
No data available
|
| Toxicity | No data available |
| Persistence and degradability | No data available |
| Bioaccumulative potential: | No data available |
| Mobility in soil | No data available |
| Results of PBT and vPvB assessment | PBT/vPvB assessment not available as chemical safety assessment not required/not conducted |
| Other adverse effects | Discharge into the environment must be avoided. |
|
Waste treatment methods
Product
|
See www.retrologistik.com for processes regarding the return of chemicals and
containers, or contact us there if you have further questions.
|
| UN Number | ADR/RID: - IMDG: - IATA: - |
| UN proper shipping name |
ADR/RID: Not dangerous goods
Sigma-Aldrich- 90765 Page 7 of 7
The life science business of Merck operates as MilliporeSigma in the US and
Canada
IMDG: Not dangerous goods
IATA: Not dangerous goods
|
| Transport hazard class(es) | ADR/RID: - IMDG: - IATA: - |
| Packing group | ADR/RID: - IMDG: - IATA: - |
| Environmental hazards | ADR/RID: no IMDG Marine pollutant: no IATA: no |
| Special precautions for user |
Not classified as dangerous in the meaning of transport regulations.
|
| Safety, health and environmental regulations/legislation specific for the substance or mixture |
This material safety data sheet complies with the requirements of Regulation (EC) No.
1907/2006.
|
| Chemical Safety Assessment | For this product a chemical safety assessment was not carried out |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |
Availability
SOYA PEPTONE SOYATONE manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of SOYA PEPTONE SOYATONE at a competitive price from us. We have ready stock of SOYA PEPTONE SOYATONE in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
