SPAN 20 Sorbitan Monolaurate
- Part number
- RXSOL-60-6605-596
- Category
- Lab Chemical
- Brand
- RXSOL
Overview
SPAN 20 is a co-surfactant and has been used in a study to investigate the oxidation of unsaturated lipids in oil-in-water emulsions. It is mainly used as an emulsifier, wetting agent and lubricant.
Applications
Sorbitan monolaurate is a detergent and monoester of lauric acid and hexitol anhydrides derived from sorbitol. It is used in a study to assess enhanced solubility and oral bioavailability of itraconazole. It is also used in a study to investigate the oxidation of unsaturated lipids in oil-in-water emulsions.
Characteristics and notes
Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Incompatible with strong oxidizing agents.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | : SPAN 20 Sorbitan Monolaurate |
| Part Number | : RXSOL-60-6605-596 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Sikka, Dahej, Hazira, JNPT, Goa, Mangalore, Cochin, Tuticorin, Chennai, Kakinada, Vizag, Paradip, Kolkata, UAE, Singapore.
| Phone | +91 22 27815540 / 41 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com | |
| Website | www.rxmarine.com |
| Name of Substance | Cas Number | EINECS No | Wt.% | Symbol |
| Ammonium Bisulphite | 1338-39-2 | 215-663-3 | 10 -30 % | Xi |
| Ethanediol | 107-21-1 | 203-473-3 | 10 - 30% | Xn |
| Quaternary Ammonium Chloride | 68391-01-5 | 269-919-4 | 10 - 30% | C |
| Propan-2-ol | 67-63-0 | 200-661-7 | 1 - 5 % | Xi |
| Classification of the substance or mixture | Not a hazardous substance or mixture according to Regulation (EC) No 1272/2008. |
| Label elements |
Not a hazardous substance or mixture according to Regulation (EC) No 1272/2008. |
| Other hazards | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
| If inhaled | After inhalation: fresh air. |
| In case of skin contact |
In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with
water/ shower.
|
| In case of eye contact |
After eye contact: rinse out with plenty of water. Remove contact lenses.
|
| If swallowed | After swallowing: make victim drink water (two glasses at most). Consult doctor if feeling unwell. |
| Most important symptoms and effects, both acute and delayed | The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 |
| Indication of any immediate medical attention and special treatment neededac | No data available |
| Suitable extinguishing media | Water Foam Carbon dioxide (CO2) Dry powder |
| Unsuitable extinguishing media | For this substance/mixture no limitations of extinguishing agents are given. |
| Special hazards arising from the substance or mixture | Carbon oxides Combustible. Vapors are heavier than air and may spread along floors. Forms explosive mixtures with air on intense heating. Development of hazardous combustion gases or vapours possible in the event of fire. |
| Special protective equipment for fire-fighters: | n case of fire. Fire fighters should wear positive pressure self-contained breathing apparatus (full face-piece type). |
|
Advice for firefighters
|
In the event of fire, wear self-contained breathing apparatus. |
| Further information |
Prevent fire extinguishing water from contaminating surface water or the ground water
system.
|
| Personal precautions, protective equipment and emergency procedures | Advice for non-emergency personnel: Do not breathe vapors, aerosols. Evacuate the danger area, observe emergency procedures, consult an expert.For personal protection see section 8. |
| Enviromental Precaution | Do not let product enter drains. |
|
Methods and materials for containment and cleaning up |
Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up with liquid-absorbent material (e.g. Chemizorb® ). Dispose of properly. Clean up affected area. |
| Reference to other sections | For disposal see section 13. |
| Precautions for safe handling | For precautions see section 2.2 |
| Storage conditions | Tightly closed. |
|
Storage class
|
Storage class (TRGS 510): 10: Combustible liquids |
| Specific end use(s) | Apart from the uses mentioned in section 1.2 no other specific uses are stipulated |
| Control parameters | Ingredients with workplace control parameters |
| Personal Protection |
Eye protection : Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses Skin protection : Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. Sigma- S6635 Page 4 of 8 The life science business of Merck operates as MilliporeSigma in the US and Canada The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it. Full contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested:Dermatril® (KCL 740 / Aldrich Z677272, Size M) Splash contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested:Dermatril® (KCL 740 / Aldrich Z677272, Size M) data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 87300, e-mail sales@kcl.de, test method: EN374 If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the EC approved gloves. This recommendation is advisory only and must be evaluated by an industrial hygienist and safety officer familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario.Respiratory protection : Not required; except in case of aerosol formation. |
|
Control of environmental exposure |
Do not let product enter drains.
|
Gloves Suit
| Physical state | Liquid |
| Colour | No data available |
| Odour | No data available |
|
Melting
point/freezing point
|
No Data Available |
|
Initial boiling point
and boiling range
|
No data available |
| Flammability (solid, gas) | No Data Available |
| Upper/lower flammability or explosive limits | No data available |
| Flash point | No data available |
|
Autoignition
temperature
|
No data available |
|
Decomposition
temperature
|
No data available |
| pH | No data available |
| Viscosity |
Viscosity, kinematic: No data available
Viscosity, dynamic: No data available
|
| Water solubility | No data available |
|
Partition coefficient:
n-octanol/water
|
No data available |
| Vapor pressure | No data available |
|
Density 1,058 g/cm3 at 20 °C
Relative density
|
1,058 g/cm3 at 20 °C |
|
Relative vapor
density
|
No data available |
|
Particle
characteristics
|
No data available |
| ExplosiOxidizing | No data available |
| Oxidizing properties | No data available |
| Other safety information | No data available |
| Recativity |
Forms explosive mixtures with air on intense heating.
A range from approx. 15 Kelvin below the flash point is to be rated as critical.
|
| Chemical stability | The product is chemically stable under standard ambient conditions (room temperature) . |
| Possibility of hazardous reactions |
Violent reactions possible with:
Strong oxidizing agents
|
| Incompatible materials | No data available |
| Hazardous decomposition products |
In the event of fire: see section 5 |
| Condition to Avoid | Strong heating. |
| Acute toxicityac | LD50 Oral - Rat - 33.600 mg/kg Remarks: (RTECS) Inhalation: No data available Sigma- S6635 Page 6 of 8 The life science business of Merck operates as MilliporeSigma in the US and Canadav Dermal: No data available |
| Skincorrosion/irritation |
No data available
|
| Serious eye damage/eye irritation | No data available |
| Respiratory or skin sensitization | No data availableaa |
| Germ cell mutagenicity | No data available |
| Carcinogenicity |
No data available
|
| Reproductive toxicity | No data available |
| Specific target organ toxicity - single exposure | No data available |
| Specific target organ toxicity - repeated exposure | No data available |
| Aspiration hazard | No data available |
| Endocrine disrupting properties Product: | Assessment : The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. RTECS: WG2920000 To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated |
| Toxicity | No data available |
| Persistence and degradability | No data available Biochemical Oxygen Demand (BOD) 600 mg/g Chemical Oxygen Demand (COD) 2.170 mg/g |
| Bioaccumulative potential | No data available |
| Mobility in soil | No data available |
| Results of PBT and vPvB assessment | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher |
|
Endocrine disrupting properties
Product:
|
Assessment : The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. |
| Other adverse effects | Additional ecological information No data available |
|
Waste treatment methods
|
No data available |
| UN Number | ADR/RID: - IMDG: - IATA: - |
| UN proper shipping name | ADR/RID: Not dangerous goods IMDG: Not dangerous goods IATA: Not dangerous goods |
| Transport hazard class(es) 8 | |
| ADR/RID |
ADR/RID: - IMDG: - IATA: -
|
| Packing group | |
| Packing group | ADR/RID: - IMDG: - IATA: - |
| Environmental hazards | |
| Environmental hazards | ADR/RID: no IMDG Marine pollutant: no IATA: no |
|
Special precautions for user
Further information
|
Not classified as dangerous in the meaning of transport regulations. |
| Safety, health and environmental regulations/legislation specific for the substance or mixture | This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006. |
| Chemical safety assessment | For this product a chemical safety assessment was not carried out |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |
Availability
SPAN 20 Sorbitan Monolaurate manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of SPAN 20 Sorbitan Monolaurate at a competitive price from us. We have ready stock of SPAN 20 Sorbitan Monolaurate in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
