SUCROSE AR
- Part number
- RXSOL-60-6605-622
- Category
- Lab Chemical
- Brand
- RXSOL
Overview
Sucrose appears as white odorless crystalline or powdery solid. Denser than water. Sucrose is a glycosyl glycoside formed by glucose and fructose units joined by an acetal oxygen bridge from hemiacetal of glucose to the hemiketal of the fructose.
Applications
Sucrose is the most common form of carbohydrate used to transport carbon within a plant. Sucrose is able to be dissolved into water, while maintaining a stable structure.
Characteristics and notes
Sucrose occurs naturally in sugarcane, sugar beets, sugar maple sap, dates, and honey. It is produced commercially in large amounts (especially from sugarcane and sugar beets) and is used almost entirely as food. See also sugar.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name |
|
|
| Product Type | SUCROSE AR | |
| Revised date |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Chennai, Visakhapatnam, Kolkata, Fujairah, Muscat Barka
| Phone | +91 22 27815541 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
Substance / Preparation: SUCROSEGR
CAS No :57-50-1
Substance.
Contains no other components or impurities which will influence the classification of theproduct.
3.1. Classification of the substance or mixture
Classification EC 67/548 or EC 1999/45
Not classified.
Hazard Class and Category Code(s), Regulation (EC) No 1272/2008 (CLP)
Not classified.
3.2. Label elements
Labelling EC 67/548 or EC 1999/45
Not classified.
Labelling Regulation EC 1272/2008 (CLP)
Not classified.
3.3. Other hazards
Other hazards: The substance does not fulfil the criteria to be identified as PBT
substance or vPvBsubstance according to Annex XIII of Regulation REACH.
4.1. Description of first aid measures
Inhalation: Assure fresh air breathing. Allow the victim to rest.
Skin contact: Remove affected clothing and wash all exposed
skin area with mild soapandwater, followed by warm water rinse.
Eye contact: Rinse immediately with plenty of water.
Obtain medical attention if pain,blinking orredness persist.
Ingestion: Obtain emergency medical attention. Rinse mouth. Do NOT induce vomiting.
4.2. Most important symptoms and effects, both acute and delayed
Symptoms relating to use: Not expected to present a significant hazard underanticipated conditions ofnormaluse.
4.3. Indication of any immediate medical attention and special treatment needed
General information: Never give anything by mouth to an unconscious person.
If youfeel unwell, seekmedical advice (show the label where possible).
5.1. Extinguishing media
Suitable extinguishing media: Foam. Dry powder. Carbon dioxide. Water spray. Sand.
Unsuitable extinguishing media: Do not use a heavy water stream.
Surrounding fires: Use water spray or fog for cooling exposed containers.
5.2. Special hazards arising from the substance or mixture
Hazardous combustion products: Under fire conditions, hazardous fumes will bepresent.
5.3. Advice for fire-fighters
Protection against fire: Do not enter fire area without proper protective
equipment,including respiratoryprotection.
Special procedures: Exercise caution when fighting any chemical fire
. Avoid (reject)fire-fighting water toenter environment.
6.1. Personal precautions, protective equipmentand emergency procedures
For emergency responders: Equip cleanup crew with proper protection.Ventilate area.
For non-emergency personnel: Evacuate unnecessary personnel.
6.2. Environmental precautions
Environmental precautions: Prevent entry to sewersand public waters.
Notifyauthorities if product enterssewers or public waters.
6.3. Methods and material for containment and cleaning up
Clean up methods: On land, sweep or shovel into suitable containers.
Minimizegeneration of dust.Store away from other materials.
6.4. Reference to other sections
See section 8. Exposure controls/personal protection
7.1. Precautions for safe handling
Handling: Wash hands and other exposed areas with mild soap
and water before eat,drink orsmoke and when leaving work.
Technical protective measures: Provide good ventilation in process area to preventformation of vapour.
7.2. Conditions for safe storage, including any incompatibilities
Storage: Keep only in the original container in a cool, well ventilated place.
Keepcontainerclosed when not in use.
Storage-away from: Strong bases. Strong acids. Sources of ignition. Direct sunlight.
7.3. Specific end use(s)
Specific end use(s): None.
8.1. Exposurecontrols
Personal protection: Avoid all unnecessary exposure.
• Respiratory protection: Wear approved mask.
• Hand protection: Wear protective gloves.
• Eye protection: Chemical goggles or safety glasses.
• Others: When using, do not eat, drink or smoke.
8.2. Control parameters
Occupational Exposure Limits: No data available.
9.1. Information on basic physical and chemical properties
Physical state at 20 °C: Solid.
Odour: Odorless
Odour threshold: No data available.
pH value: Not applicable.
Melting point [°C]: 185-187 °C
Decomposition point [°C]: N/A
Critical temperature [°C]: N/A
Auto-ignition temperature [°C]: N/A
Flammability (solid, gas): N/A
Flash point [°C]: 93.3°C
Boiling point [°C]: N/A
Initial boiling point [°C]: N/A
Final boiling point [°C]: N/A
Evaporation rate: N/A
Vapour pressure [20°C]: N/A
Vapour pressure mm/Hg: N/A
Vapour density: N/A
Density [g/cm3]: N/A
Relative density, gas (air=1): N/A
Relative density, liquid (water=1): N/A
Solubility in water [% weight]: 342 g/l at 20 °C-c
Solubility in water: N/A
Log Pow octanol / water at 20°C: No data available.
Solubility: 5.5-7 at 342 g/l a
Viscosity at 40°C [mm2/s]: N/A
9.2. Other information
Explosive properties: N/A
Explosion limits-upper [%]: N/A
Explosion limits-lower [%]: N/A
Oxidising properties: No data available.
10.1. Reactivity
Reactivity: Not established.
10.2. Chemical stability
Chemical stability: Stable under recommended storage conditions.
10.3. Possibility of hazardous reactions
Hazardous reactions: Not established.
10.4. Conditions to avoid
Conditions to avoid: Direct sunlight. Extremely high or low temperatures.
10.5. Incompatible materials
Materials to avoid: Strongacids. Strong bases.
10.6. Hazardous decomposition products
Hazardous decomposition products: Fumes. Carbon monoxide. Carbon dioxide.
11.1. Information on toxicological effectsAcute toxicity
• Inhalation: Based on available data, the classification criteria are not met.
• Dermal: Based on available data, the classification criteria are not met.
• Ingestion: Based on available data, the classification criteria are not met.
Corrosion: Based on available data, the classification criteria are not met.
Irritation: Based on available data, the classification criteria are not met.
Sensitization: Based on available data, the classification criteria are not met.
Mutagenicity: Based on available data, the classification criteria are not met.
Carcinogenicity: Based on available data, the classification criteria are not met.
Toxic for reproduction: Based on available data, the classification criteria are not met.
STOT-single exposure: Based on available data, the classificationcriteria are not met.
STOT-repeated exposure: Based on available data, the classification criteria are not met.
Aspiration hazard: Based on available data, the classification criteria are not met.
12.1. Toxicity
Toxicity information: Not established.
12.2. Persistence-degradability
Persistence-degradability: Biodegradable.
12.3. Bioaccumulative potential
Bioaccumulative potential: Not established.
12.4. Mobility in soil
Mobility in soil: Not established.
12.5. Resultsof PBT and vPvB assessment
Results of PBT and vPvB assessment: The substance does not fulfil the
criteria to beidentified as PBT substance or vPvBsubstance according to
Annex XIII of RegulationREACH.
12.6. Other adverse effects
Environmental precautions: Avoid release to the environment.
13.1. Waste treatment methods
General: Avoid release to the environment.
Dispose in a safe manner in accordance withlocal/national regulations.
14.1. Land transport (ADR-RID)
General information: Not regulated.
14.2. Sea transport (IMDG) [English only]
General information: Not regulated.
14.3. Air transport (ICAO-IATA) [English only]
General information
Availability
[SUCROSE AR] manufacturers, suppliers, exporters in Mumbai, Gandhidham, Kolkata, Varanasi, Visakhapatnam, Chennai, Fujairah, Dubai, Canada BC, Barka, Sohar, Muscat, Oman.
Lab chemicals manufacturers, suppliers, exporters in India, UAE Middle East, Barka, Sohar, Muscat, Oman, Canada.
[SUCROSE AR] is available in small packing as well as in bulk. Buy premium quality [SUCROSE AR] and other lab chemicals from one of the most trusted brands.
