|
Porduct Name |
SUDAN RED B |
|
Part Number |
RXSOL-60-6605-627 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA
|
Phone |
+91 22 20871200 - 1400 |
|
Fax |
+91 22 27612100 :::AOH :0091 9821214367 |
|
Email |
rxsolchemicals@gmail.com |
|
Website |
www.rxmraine.com |
|
Chemical Name |
Cas No |
EC No |
Whight |
Formula |
|
SUDAN RED B |
6368-72-5 |
228-862-5 |
<= 100 % |
C24H21N5 |
|
Classification of the substance or mixture |
Not a hazardous substance or mixture according to Regulation (EC) No 1272/2008. |
|
Other hazards |
This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
|
If inhaled |
IIf breathed in, move person into fresh air. If not breathing, give artificial respiration. |
|
Eye Contact |
Flush eyes with water as a precaution. |
|
Swallowed |
Never give anything by mouth to an unconscious person. Rinse mouth with water. |
|
Skin Contact |
Wash off with soap and plenty of water. |
|
Most important symptoms and effects, both acute and delaye |
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 |
|
Indication of any immediate medical attention and special treatment needed |
No data available |
|
Suitable extinguishing media |
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. |
|
Unsuitable extinguishing media |
Do NOT use water jet. |
|
Special hazards arising from the substance or mixture |
Carbon oxides Nitrogen oxides (NOx) Combustible. |
|
Further information |
No data available |
|
Advice for firefighters |
Wear self-contained breathing apparatus for firefighting if necessary. |
|
Personal precautions, protective equipment and emergency procedures |
Avoid dust formation. Avoid breathing vapors, mist or gas. For personal protection see section 8. |
|
Enviromental Precaution |
No special environmental precautions required. |
Methods and materials for
containment and cleaning |
Sweep up and shovel. Keep in suitable, closed containers for disposal. |
|
Reference to other sections |
For disposal see section 13. |
|
Advice on protection against fire and explosion |
Provide appropriate exhaust ventilation at places where dust is formed. |
|
Hygiene measures |
General industrial hygiene practice. For precautions see section 2.2. |
|
Storage conditions |
Keep container tightly closed in a dry and well-ventilated place. Store in cool place. |
|
Storage class |
Storage class (TRGS 510): 11: Combustible Solids |
|
Specific end use(s) |
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated |
|
Eye/face protection |
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). |
|
Body Protection |
Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place., The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. |
|
Skin protection |
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it. Full contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested:Dermatril® (KCL 740 / Aldrich Z677272, Size M) Splash contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested:Dermatril® (KCL 740 / Aldrich Z677272, Size M) data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 87300, e-mail sales@kcl.de, test method: EN374 If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the EC approved gloves. This recommendation is advisory only and must be evaluated by an industrial hygienist and safety officer familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario. |
|
Respiratory protection |
Respiratory protection is not required. Where protection from nuisance levels of dusts are desired, use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
|
|
Control of environmental exposure |
No special environmental precautions required. |
|
Physical state |
Powder |
|
Colour |
Purple |
|
Odour |
No data available |
|
pH |
No data available |
|
Melting Point |
130 °C |
|
Boiling Point |
No data available |
|
Flash Point |
No data available |
|
Flammability (solid, gas) |
No data available |
|
Upper/lower flammability or explosive limits |
No data available |
|
Autoignition temperature |
No data available |
|
Decomposition temperature |
No data available |
|
Vapour pressure |
No data available |
|
Viscosity |
No data available |
|
Density |
No data available |
|
Relative Density |
No data available |
|
Partition coefficient |
No data available |
|
Explosive properties |
No data available |
|
Solubility |
No data available |
|
Ignition temperature |
No information available. |
|
Particle characteristics |
No data available |
|
Reactivity |
No data available |
|
Chemical stability |
Stable under recommended storage conditions. |
|
Possibility of hazardous reactions |
No data available |
|
Conditions to avoid |
No data available |
|
Incompatible materials |
Strong oxidizing agents, acids
|
|
Hazardous decomposition products |
In the event of fire: see section 5 |
|
Acute toxicity |
Oral: No data available Inhalation: No data available Dermal: No data available |
|
Skin corrosion/irritation |
No data available |
|
Serious eye damage/irritation |
No data available |
|
Respiratory or skin sensitization |
No data available |
|
Carcinogenicity |
No data available |
|
Germ cell mutagenicity |
Test Type: Ames test Test system: S. typhimurium |
|
Reproductive toxicity |
No data available |
|
Specific target organ toxicity - single exposure |
No data available
|
|
Additional Information |
RTECS: QM2850000 |
|
Persistence and degradability |
No data available |
|
Toxicity |
No data available |
|
Mobility in soil |
No data available |
|
Results of PBT and vPvB assessment |
This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
|
Endocrine disrupting properties |
No data available |
|
Other adverse effects |
No data available . |
|
Contaminated packaging |
Dispose of as unused product. |
|
Waste treatment Method |
Offer surplus and non-recyclable solutions to a licensed disposal company. |
|
UN number |
ADR/RID:- IMDG:- IATA: - |
|
UN proper shipping name |
ADR/RID:Not dangerous goods IMDG:Not dangerous goods IATA:Not dangerous goods |
|
Transport hazard class(es) |
ADR/RID: - IMDG: - IATA:- |
|
Packaging group |
ADR/RID: - IMDG: - IATA:- |
|
Environmental hazards |
ADR/RID: - IMDG: No IATA: No |
|
Further information |
Not classified as dangerous in the meaning of transport regulations. |
|
Safety, health and environmental regulations/legislation specific for the substance or mixture |
This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006. |
|
Chemical Safety Assessment |
For this product a chemical safety assessment was not carried out |
|
Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and weassume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
|
