Scale Lime Cleaner DE Limer Machine Descaler
- Part number
- RXSOL-15-1052-025
- Category
- House / HOTEL & CATERING
- Brand
- RXSOL
Overview
An active lime scale remover to remove alkaline salts and water scales from automatic dishwashing machine. KITCHEN & BATHROOM CLEANER , lime eater dissolves hard and old lime scale deposits from your appliances. It extends the life of the appliance and saves running cost. It can be used in appliances such as Washing Machines, Dish Washers, Geysers, Steam Iron, Coffee Makers, Bath Tubs, Bathroom Fixtures etc.
It is a blend of surfactants, chelating agent, organic thickener, quaternery halide, phosphoric acid and perfume.
It is the ultimate in washroom cleaning and can be used on toilets, sinks and showers without fear of damage to the finish on stainless steel.
It is excellent for use on terazzo and quarry tiled floors, leaving all areas fresh, gleaming and clean.
It does not contain any harsh abrasives and afteruse leaves a pleasent fragrance.
Concentrated machine, vessel and surface descaler
Applications
The correct quantities of RXSOL-11-1052-025 requirement for descaling will depend upon the character and thickness of scale deposits. For regular de-scaling of dish washing machines prepare a 2 – 4% solution with cold water, and fill the tank just below the overflow level, heat the mixture and allow to run machine until lime scale deposits disappear.
Apply full strength to highly contaminated areas where spray does not reach. Drain the tank and fill with cold water and run the machine for 5 minutes and flush with water until the outlet water shows neutral pH. Good results are obtained when descaling is done at 60 Deg. C.
Dip tank method can be used for brightening aluminum, stainless steel equipments and utensils. Prepare a 3 – 5% solution of RXSOL-11-1052-5 with water and soak the utensils for a while to obtain a bright surface. Wash thoroughly with cold water and rinse dry.
Dosage and directions
PROCEDURE FOR SCALE CLEANING for HOUSE HOLD :: --
1. Combine one part water and one part with RXSOL-15-1052-5 . Place the mixture in the pot, kettle or coffeemaker (where you normally put water).
2. Bring the diluted RXSOL-15-1052-5 solution to a boil in pots and kettles. Turn the stove off once the mixture comes to a boil. Allow the mixture to cool in the pot or kettle overnight.
3. Empty the RXSOL-15-1052-5 solution from the pots the following day. Scrub away any remaining lime scale using a mildly abrasive cleaning pad.
4. Run a cycle on coffeemakers so that the RXSOL-15-1052-5 solution works through all parts of the machine, then run clear water through the machine two or three times to flush out any RXSOL-15-1052-5 residue.
TYPICAL METHOD :-- HOW TO CLEAN KETTLE SCALE ?
That unsightly white, chalky substance in your kettle is called lime scale. It is a result of built-up calcium deposits that occur when water with high calcium levels evaporates, like when you boil water in your kettle. Although lime scale is not harmful, if you don't wash it out, it can build up and eventually clog your kettle's spout.
PROCEDURE :
1> Fill the kettle with a half cup of RXSOL-15-1052-025
2> Add two cups of water.
3> Heat the kettle until the liquid boils. Let it boil for a few minutes.
4> Empty the kettle.
5> Rinse the kettle with fresh water. Repeat Steps 1 through 4 if any lime scale remains on the kettle.
6> Wash the kettle before you use it.
Here is some economical way to descale your kettle :-
A kettle that is full of lime-scale not only looks terrible, but takes longer to boil and wastes electricity. This easy to follow the instruction it will show you how to Descale your kettle to achieve optimum and economical performance.
Step 1: You will need:
Step 2: Why bother
A kettle that is full of lime-scale not only looks terrible, but takes longer to boil and wastes electricity, because the scale prevents the element conducting heat well. Eventually the element can burn out if it is not de-scaled, so you'd have to throw it out and get a new kettle.
Step 3: What to use
You can use white vinegar or citric acid, which ever you have available to you.
Step 4: What about de-scalers?
There are commercial de-scalers available, but make sure that they are specifically approved for use on kettles and are not metal de-scalers. If you choose to use them, do follow the manufacturer's instructions.
Step 5: Make up the mixture
If you are using vinegar, dilute it with water in a 50:50 ratio. If you are using citric acid, mix 30g with 500ml of water.
Step 6: Using vinegar to de-scale
Vinegar should be left in the kettle for 1 hour, without boiling.
Step 7: Using lemon juice to de-scale
Pour the lemon juice in to the kettle and boil. Leave the kettle to cool before emptying it.
Step 8: Using lemons to descale
If your kettle only needs mild de-scaling, you can try quartering a lemon, filling the kettle with water and putting in the lemon. Boil the kettle once or twice, and leave to soak until the water has cooled.
Step 9: Wipe down
If there is any limescale left in the kettle, you can wipe it down with a small amount of bicarbonate of soda on a damp cloth. Let the element cool down, and unplug the kettle before you do this.
Step 10: Rinse
Fully rinse the kettle with fresh water at least 5 times before using again.
Characteristics and notes
RXSOL-11-1052-5 is a mild descaling liquid suitably designed to remove lime, food films and water scales from metallic and plastic surfaces in food processing operations. It attacks the built up calcium, magnesium or iron scales instantly and removes the scales. It finds extensive applications in de-liming machines, steam tables, cleaning stainless steel and iron equipments, floors, shower stalls, tiles, walls or any surface to be cleaned from scale deposits. It contains a mixture of liquid acids inhibited to arrest its attack on metals. It will not attack plastic, hard metal or any other surfaces, if used as directed.
In India and UAE, we are Machine Descaler manufacturer. And holding name as a reputed brand RXSOL Machine Descaler supplier in Mumbai, Nerul, Navi Mumbai, Rabale, Mahape, Kandla, Gandhidham, Surat, Goa, Manglore, Kakinada, Vizag, Ennore, Chennai, Kolkata, Haldia, Fujairah, Dubai, Abu Dhabi and entire Middle East. We are Machine Descaler exporter for Singapore and Africa.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | Scale Lime Cleaner DE Limer Machine Descaler |
| Part Number | RXSOL-15-1052-025 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Sikka, Kandla, Dahej , Hazira, JNPT, Goa, Mngalore, Cochin, Tuticorin,Chennai, Kakinada,Vizag, Paradip, Haldia, Kolkata,Fujairah.
| Phone | +91 22 27815540 / 27815542 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com | |
| Website | www.rxmarine.com |
| Name of Substance | Cas Number | Classification | Molecular weight |
| Hydrogen Chloride (Solution 30%) | 7647-01-0 | C, R23-35 | 5-40% |
| Phosphoric Acid (Solution 85%) | 7664-38-2 | C, R34 | 5-40% C |
Ingredients that do not contribute to the classification of the product 20-90% -
| A clear liquid with pungent, irritating odor | DANGER! Causes severe burns. Irritating to respiratory system. |
| Inhalation |
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician. |
| Skin Contact | Immediately flush the contaminated skin with soap and water. If this chemical penetrates the clothing, immediately remove the clothing and flush the skin with water. If irritation persists after washing, get medical attention. 2 |
| Eye Contact | Immediately wash the eyes with large amounts of water, occasionally lifting the lower and upper lids. Get medical attention immediately. Contact lenses should not be worn when working with this chemical. |
| INGESTION |
If this chemical has been swallowed, get medical attention immediately.
|
| EXTINGUISH MEDIA | Non- combustible substance. It doesn’t burn itself but may decompose upon heating to produce corrosive and/or toxic fumes. Use dry chemical, CO2, alcohol-resistant foam or water spray. |
| FIRE FIGHTING PROCEDURES | Approach fire from upwind to avoid hazardous vapors. Use flooding quantities of water as fog or spray to keep fire exposed containers cool. Extinguish fire using agent suitable for surrounding fire. Firefighters should wear chemical protective suit with self contained positive-pressure breathing apparatus. |
| HAZARDOUS COMBUSTION PRODUCTS | On combustion, form toxic fumes of phosphorous oxides and hydrogen chloride. |
| Personal precautions | Wear appropriate protective gear for the situation. See personal protection information in section 8. |
| Environmental Precautions | Prevent run off into ground and surface waters or into sewers. |
| Methods and material for containment and cleaning up |
Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Stop leak if you can do it without risk. Prevent entry into waterways, sewers, basements or confined areas. Cover with plastic sheet to prevent spreading. Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers.
|
| Reference to other sections | For disposal see section 13. |
| HANDLING | Avoid contact with skin and avoid breathing vapors. Do not eat, drink, or smoke in work area. Wash hands prior to eating, drinking, or using restroom. Any protective clothing or shoes which become contaminated should be removed immediately, and laundered before wearing again. Follow protective controls set forth in Section 8 when handling this product. 3 |
| STORAGE | Store in closed, properly labeled, rubber-lined steel, acid-resistant plastic, or glass containers. Do not store near strong alkalies or reactive materials. Do not remove or deface label or tag. |
| EXPOSURE LIMITS | Name of Substance: Hydrogen Chloride |
| OSHA Permissible Exposure Level (PEL) | Ceiling concentration 5 ppm (7 mg/m3) |
| ACGIH Threshold Limit Value (TLV) |
Ceiling concentration 5 ppm |
| OSHA Permissible Exposure Level (PEL) | 8 hour time-weighted average 1 mg/m3. |
| ACGIH Threshold Limit Value (TLV) | Short term exposure limit 3 mg/m3. |
| ACGIH Threshold Limit Value (TLV) | Time-weighted average 1 mg/m3. |
| PERSONAL PROTECTION | Eye and face protection: Wear safety glasses which are splash proof and face shield. |
| Skin protection | Wear impervious clothing, boots and gloves. |
| Respiratory protection | Wear a full face respirator with acid gas canister where vapors exceed or are likely to exceed 5 ppm. |
| Appearance | Liquid |
| Colour | Colourless |
| Odour | Acidic |
| Odor Threshold | No information available |
| pH | 1 |
| Melting Point/Freezing Point | Not available |
| Initial Boiling Point and Boiling Range | Not available |
| Flash Point | None |
| Evaporation Rate | Not Available |
| Explosion Limits |
Lower Explosion Limit (vol %): None Upper Explosion Limit (vol %): None |
| Vapor Pressure | Not Available |
| Relative vapor density (air=1) | Not Available |
| Density (g/ml) | 1.1-1.2/150C |
| Water Solubility | Not Available |
| Partition coefficient:n-octanol/water | Not Available |
| Auto-ignition temperature | 253,0 °C |
| Viscosity | Not Available |
| Solubility | Completely Soluble In Water |
| STABILITY | Product is stable under normal use and storage. |
| Conditions to Avoid | Contact with strong bases can cause violent reaction generating large amounts of heat. Reactions with metals can release flammable hydrogen gas. |
| MATERIALS TO BE AVOIDED | The substance decomposes on contact with alcohols, aldehydes, cyanides, phenols, esters, and halogenated organics producing toxic fumes. Attacks many metals forming flammable/explosive gas (hydrogen). The substance is a medium strong acid, reacts violently with bases. |
| Hazardous Decomposition Products | The formation of toxic gas Chlorine, flammable gas of Hydrogen and toxic fumes of Oxides of Phosphorous is possible. |
| EXPOSURE LIMITS |
Name of Substance: Hydrogen Chloride SKIN AND EYE IRRITATION DATA Eye rabbit: 5 mg/30s rinse |
| ACUTE TOXICITY DATA |
Inhalation mouse lethal concentration (50 percent kill): 1,108 ppm/1 hour 5 Inhalation rat lethal concentration (50 percent kill): 3,124 ppm/1 hour Inhalation rabbit lowest published lethal concentration: 4,413 ppm/30 minute SKIN AND EYE IRRITATION DATA Eye rabbit: 119 mg/24 hour Skin rabbit: 595 mg/24 hour. |
| ACUTE TOXICITY DATA |
Oral rat lethal dose (50 percent kill): 1,530 mg/kg Inhalation rat lethal concentration (50 percent kill): >850 mg/m3/1 hour Skin rabbit lethal dose (50 percent kill): 2,740 mg/kg HEALTH EFFECTS |
| Inhalation |
Exposure to high concentrations of vapour or mist can cause burning sensation, cough, laboured breathing, shortness of breath and sore throat. Symptoms may be delayed. |
| Skin contact |
Liquid hydrochloric acid or concentrated vapors can rapidly cause burning of skin. Repeated or prolonged contact with dilute solutions, and concentrated vapors, can cause irritation and dermatitis. |
| Eye contact |
Liquid or concentrated vapors can cause eye irritation, severe burns and permanent damage including blindness. |
| Ingestion | Can cause severe burns of mouth, oesophagus and stomach. Nausea, pain and vomiting frequently occur. |
| ECOTOXICOLOGICAL DATA |
Name of Substance: Hydrogen Chloride Acute LC50 (48 hours) for Buegill: 3.6 mg/l Acute LC50 (96 hours) for Mosquito Fish: 282 ppm |
| Fish toxicity |
fish LC50: <138 mg/l; Aquatic organisms LC50: 100-1000 mg/l 96 h |
| DEGRADATION |
Hydrogen chloride and phosphoric acid in water dissociates almost completely and will be neutralized by natural alkalinity and carbon dioxide. It will also sink into the soil and will be somewhat neutralized. 6 |
| Bioaccumulative potential | No data available |
| DISPOSALS METHODS |
All disposals of this material must be done in accordance with local, state and Federal regulations. Waste characterization and compliance with disposal regulations are the responsibilities of the waste generator. Recovered solids or liquids may be sent to a licensed reclaimed or disposed of in a permitted waste management facility. |
ADR/RID
| UN number | 3264 |
| UN proper shipping name | Corrosive Liquid, Acidic, Inorganic NOS (Hydrochloric Acid, Phosphoric Acid) |
| Hazard Class | 8 |
| Packing Group | III |
IMDG
| UN number | 3264 |
| UN proper shipping name | Corrosive Liquid, Acidic, Inorganic NOS (Hydrochloric Acid, Phosphoric Acid) |
| Hazard Class | 8 |
| Packing Group | III |
IATA
| UN number | 3264 |
| UN proper shipping name | Corrosive Liquid, Acidic, Inorganic NOS (Hydrochloric Acid, Phosphoric Acid) |
| Hazard Class | 8 |
| Packing Group | III |
|
S26 |
In case of contact with eyes rinse immediately with plenty of water and seek medical advice.. |
| S36/37/39 | Wear suitable protective clothing, gloves and eye/face protection. 7 |
| S45 | In case of accident of if you feel unwell seek medical advice immediately (show the label where possible). |
| S23 | Do not breathe gas/vapour. |
| S38 | In case of insufficient ventilation, wear suitable respiratory equipment. |
| Classification according to EC guidelines |
The product has been classified and labelled in accordance with current EC Directives. Risk phrases: 36/38 Irritating to eyes skin and skin. |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |
Availability
Scale Lime Cleaner DE Limer Machine Descaler manufacturer, exporter and supplier in India, Middle East, Oman. We are popular as Lime Cleaner and Descaling chemicals supplier in Mumbai, Navi MIDC, Taloja, Rabale, Vasai, Virar, Palghar, Surat, Hazira, Gandhidham GIDC, Kandla Sikka, Jamnagar, Mundra, Gujrat, Chennai, Ennore, Visakhapatnam, Andhra, Hyderabad, Kolkata, Haldia, Howrah, Manglore, Goa, Muscat Oman, Al Qusais, Deira, Saif Zone, Fujairah, Sharjah, Dubai, Abudhabi, Ajman, Diera, UAE Middle East, Al Quoz, Jebel Ali, Umm Al Quawain, Ras Al Khaimah, Masafi, Khor Fakkan, Al Hayl, Al Ain, Ras Al Khor Industrial Area, Al khubaisi, Um Ramool Industrial Area, Al Qusais Industrial Area, Jebel Ali, Sohar Barka, Muscat, Kenya Africa. Uganada