Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
Product Code: RXSOL-16-1599-020
RXSOL SEA CHEST ANTIFOULANT is a specialized liquid treatment developed to help control marine growth in sea chests, seawater cooling lines, strainers, filter boxes and associated heat exchange systems. It is designed for use in marine seawater circuits where fouling by algae, shellfish, slime and other marine organisms can reduce flow, impair heat transfer efficiency and increase maintenance requirements.
The product forms a protective conditioning effect within the system, helping reduce the attachment and development of marine growth while supporting cleaner internal surfaces and improved operational reliability. Regular use helps maintain circulation efficiency, reduce blockage risk and minimize unplanned downtime.
Ensure all systems are completely free of marine growth prior to applying AQUASPERSE RXSOL. Where required, pre-clean using DESCALING LIQUID EXTRA or RXSOL Safe Acid DESCALEX POWDER. Marine organisms require a surface to anchor; if existing growth is not removed beforehand, it will continue to provide a base for further attachment even after AQUASPERSE RXSOL Sea Chest Antifoulant dosing.
SEAWATER COOLING SYSTEMS
Inject AQUASPERSE into the sea chests using dosing equipment once every two days for a duration of one hour, adjusted according to the seawater flow rate of the system. In harbour conditions or areas with high shellfish activity, increase dosing frequency to once daily.
A concentration of 3 ppm AQUASPERSE RXSOL is adequate for fouling prevention. This corresponds to a dosage of 0.3 litres per 100 tons per hour of seawater flow.
DEEP SEA VESSELS
Dose RXSOL AQUASPERSE into the suction box or strainers at a rate of 0.3 litres per 100 tons of flow, applied over one hour every 48 hours.
COASTAL VESSELS
Meter AQUASPERSE into the suction boxes or strainers at 0.3 litres per 100 tons of seawater flow, distributed over a 24-hour period.
Example:
For a circulating pump capacity of 250 TPH, the required dosage is:
0.3 × 2.5 = 0.75 litres of AQUASPERSE for one hour.
Features and benefits of using RXSOL Sea Chest Antifoulant
| Parameter | Value |
|---|---|
| Appearance | Clear to pale yellow liquid |
| Odor | Mild characteristic |
| Specific Gravity | 1.05 – 1.15 |
| pH | 4.0 – 6.0 |
| Solubility | Completely miscible in seawater |
| Flash Point | Non-flammable |
| Active Ingredient | Marine-grade broad-spectrum biocide blend |
| Stability | Stable under normal storage |
For best performance, the system should be as clean as possible before starting routine antifoulant treatment. Heavy deposits, scale or established marine growth should be removed through suitable cleaning/descaling procedures before application.
General preventive dosing:
Dose into sea chest, suction side, strainer box or designated injection point using suitable chemical dosing equipment.
Typical treatment guidance:
A preventive dose may be applied based on seawater flow rate and vessel operating conditions. Treatment frequency can be increased in harbour operations, warm waters, or areas prone to heavy marine growth.
Indicative example format:
For systems with known seawater circulation rates, dosing can be calculated proportionally per 100 tons/hour of seawater flow.
Important:
Final dosage, frequency and compatibility should be validated by RXSOL technical team before release on TDS/PDS and before onboard use.
Sea Growth Treatment Biocide manufacturer supplier in Mumbai, Kandla, Kolkata, Chennai Vizag. Sea Growth Treatment Biocide manufacturer supplier in Fujairah, Dubai, Jebel Ali, UAE. Sea Growth Treatment Biocide manufacturer supplier in Muscat, Sohar, Duqm, OMAN.
We are marine chemical supplier since 1996.These Marine Chemicals include different sets of products such as Tank Cleaners, Maintenance Chemicals, Cooling Water Treatment Chemicals, Boiler Water Treatment Chemicals, Fuel Additives, etc.
Oman Chemical is leading one Largest Supplier, Manufacture a
Oman Chemical is leading one Largest Supplier, Manufacture a
