Sodium Dodecyl Sulfate Powder
- Part number
- RXSOL-14-1780-025
- Category
- Hand Wash / Personal care
- Brand
- RXSOL
Overview
Sodium lauryl sulfate (SLS) is an anionic surface active agent commonly used in cosmetics. It is well-known for causing skin discomfort, which can lead to altered skin barrier function and water-loss. For this reason, the FDA recommends using less than 1% in personal care products. However, when used appropriately, sodium lauryl sulfate can also provide certain skin benefitting properties.
Technical specifications
MOL WT. |||
| 9 | 31 |
|---|
pH (1% Aqueous Solution) |||
| 8.5 | 10.5 |
|---|
2.0 Max
| An anionic surfactant, usually a mixture of sodium alkyl sulfates, mainly the lauryl; lowers surface tension of aqueous solutions; used as fat emulsifier, wetting agent, detergent in cosmetics, pharmaceuticals and toothpastes; also as research tool in protein biochemistry. |
Applications
It is used as foaming agent in tooth pastes, Shaving Creams, Powder shampoo etc. In pharmaceutical industry it is used for Tableting. It is widely used in Toothpaste, to produce Shampoo & Fire Fighting Foams. • It is used in firefighting equipment also.
Dosage and directions
In cosmetics, sodium lauryl sulfate is most often used as an emulsifier or surfactant. As an emulsifier, sodium lauryl sulfate helps to stabilize and thicken solutions with ingredients of differing solubility. This allows products to achieve a more uniform texture for easier, and smoother application. Furthermore, the effect of sodium lauryl sulfate on surface tension is applicable to not only product formulations but also skin composition. It possesses great capacity for altering the surface tension of the stratum corneum. Consequently, topical application of sodium lauryl sulfate solutions can make the skin more permeable, thus allowing for better absorption of skin-enhancing molecules with less than ideal polarity and size. Additional applications of sodium lauryl sulfate include functioning as an effective cleansing agent (e.g. soaps and body wash)
Characteristics and notes
Handling :
Handle in accordance with good hygiene and safety procedures. Wear chemical safety goggles, rubber boots and heavy rubber gloves. Do not breathe dust, and avoid contact with eyes, skin and clothing. Avoid prolonged or repeated exposure and wash thoroughly after handling.
Storage :
Keep container tightly sealed. < + 30 °C. Store in a cool, dry, well-ventilated area away from incompatible substances.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name |
Sodium Dodecyl Sulfate Powder |
| Part Number | RXSOL-14-1780-025 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point ::: Mumbai, Kandla, Kolkata, Chennai, Vizag, Gandhidham, Barka Muscat, Fujairah
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com | |
| Website | www.rxmarine.com |
| Name of Substance | Cas Number | EC Number | Wight % |
| Sodium Sodecyl Sulfate | 151-21-3 |
205-788-1 |
100% |
| Signal Word | Danger |
| Hazard Statements |
H272 May intensify fire; oxidizer. H302 Harmful if swallowed. H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H335 May cause respiratory irritation. |
| Precautionary statements - prevention | P280 Wear protective gloves. |
| Precautionary statements - response |
P302 + P352 IF ON SKIN: Wash with plenty of soap and water. |
| Eye Contact |
Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Cold water may be used. Get medical attention. |
| Skin Contact | In case of contact, immediately flushes skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Cover the irritated skin with an emollient. Cold water may be used.Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention. |
| Inhalation: | Move to fresh air. If breathing is difficult, give oxygen. Get medical attention immediately if symptoms occur. |
| Ingestion: | Do not induce vomiting. Obtain medical attention.If vomiting occurs, lean patient forward or place on left side (head-down position, if possible) to maintain an open airway and prevent aspiration. |
| Notes to Physician | Treat symptomatically |
| Flammability | May be combustible at high temperature. |
| Flash Point | CLOSED CUP: Higher than 93.3°C (200°F). |
| Suitable extinguishing media | Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. |
|
Hazardous combustion products |
Fire may cause the evolution of Sulphur oxides, nitrogen oxides. |
| Protective Equipment | Use personal protective equipment. |
| Specific Hazards Arising from the Chemical |
Has a fire-promoting effect due to the release of oxygen. Ambient fire may liberate hazardous vapours. |
| Spillage | Oxidizing material. Stop leak if without risk. Avoid contact with a combustible material (wood, paper, oil, clothing...). Keep substance damp using water spray. Do not touch spilled material. Prevent entry into sewers, basements or confined areas dike if needed. Eliminate all ignition sources. Call for assistance on disposal. |
| Personal Protection | Advice for non-emergency personnel: Avoid inhalation of dusts. Evacuate the danger area, observe emergency procedures, consult an expert. Advice for emergency responders: Protective equipment see section 8. |
| Enviromental Precaution | Do not let product enter drains. |
|
Methods and materials for containment and cleaning |
Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up dry. Dispose of properly. Clean up the affected area. Avoid generation of dust |
| Handling |
Keep away from heat. Keep away from sources of ignition. Keep away from combustible material.. Empty containers pose a fire risk, evaporate the residue under a fume hood. Ground all equipment containing material. Do not ingest. Do not breathe dust. Wear suitable protective clothing. In case of insufficient ventilation, wear suitable respiratory equipment. If ingested, seek medical advice immediately and show the container or the label. Avoid contact with skin and eyes. Keep away from incompatibles such as reducing agents, combustible materials, organic materials, metals |
| Storage |
Strong Oxidizer. Moisture Sensitive. Keep container tightly closed. Keep container in a cool, well-ventilated area. Separate from acids, alkalies, reducing agents and combustibles. See NFPA 43A, Code for the Storage of Liquid and Solid Oxidizers. Do not store above 23°C (73.4°F). |
| Advice on general occupational hygiene | Advice on safe handling Observe label precautions. Change contaminated clothing. Wash hands after working with substance. |
| Engineering Control | Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit. |
| Personal Protection |
Eye/face Protection: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin and body protection: Wear appropriate protective gloves and clothing to prevent skin exposure. Respiratory Protection : Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator exposure limits are exceeded or if irritation or other symptoms are experienced. |
| Other Protection Measure | Handle in accordance with good industrial hygiene and safety practice. |
| Exposure Limit | Not Available |
Gloves Suit
| Form | Solid |
| Colour | White |
| Odour | Odourless |
| Odor Threshold | Not Applicable |
| pH | 3.2 - 3.5 at 100 g/l 20 °C |
| Melting Point | 120 °C (decomposition) |
| Boiling Point | Not Applicable |
| Flash Point | Not Applicable |
| Evaporation Rate | Not Applicable |
| Flammability (solid, gas) | No Data Available |
| Explosive limits | No Data Available |
| Vapour pressure | No Data Available |
| Vapour Density | No Data Available |
| Specific Gravity | 1.98 g/cm3 at 20 °C |
| Partition coefficient | No data available |
| Explosive properties | None |
| Solubility | Soluble in water 620 g/l at 20 °C |
| Ignition temperature | No information available. |
| Reactivity | Strong Alkali , Bases. |
| Stability | The product is chemically stable under standard ambient conditions (room temperature). |
| Possibility of hazardous reactions | Risk of explosion with:, Risk of ignition or formation of inflammable gases or vapours with:,Exothermic reaction with:strong alkalis, bases, combustible substances, Iron, Zinc, hydrogen peroxide, peroxi compounds, Copper, silver compounds, Powdered metals |
| Conditions to avoid | Strong Heating |
| Incompatible materials | No Data Available |
| Hazardous Polymerization | Hazardous polymerization does not occur. |
| Rout Of Entry | Inhalation. Ingestion. |
| Toxicity to Animal | WARNING: THE LC50 VALUES HEREUNDER ARE ESTIMATED ON THE Acute oral toxicity (LD50): 689 mg/kg [Rat]. |
| Toxic Effects on Human | May cause damage to the following organs: upper respiratory tract. Other Toxic Effects on Humans: Hazardous in case of skin contact (irritant, sensitizer), of ingestion, of inhalation (lung irritant, lung sensitizer). |
| Special Remarks on other Toxi Effects on Humans: |
Acute Potential Health Effects: Skin: Causes skin irritation. May cause skin sensitization, an allergic reation, which becomes evident upon re-exposure to this material. Eyes: Causes eye irritation. Ingestion: Causes gastrointestinal (digestive) tract irritation with nausea, vomiting, and diarrhea. May be harmful if swallowed. Inhalation: Causes respiratory tract irritation. May cause chemical pneumonitis and pulmonary edema, inflammation, edema of bronchi and larynx. Chronic Potential Health Effects: Repeated or prolonged skin exposure may cause allergic reactions in sensitive individuals. Repeated or prolonged exposure by inhalation may affect respiration and metabolism. |
| Eco Toxicity | Not Available |
| COD and BOD 5 | Not Available |
| Products Biodegradation: | The methods for determining the biological degradability are not applicable to inorganic substances. |
| Mobility in soil | No Information available |
| Results of PBT and vPvB assessment | PBT/vPvB assessment not available as chemical safety assessment not required/not conducted. |
| Other adverse effects | Henry constant : Transition from water solution into the atmosphere is not to be expected. |
| Waste treatment Method | Waste material must be disposed of in accordance with the national and local regulations. Leave chemicals in original containers. No mixing with other waste. Handle uncleaned containers like the product itself |
DOT
| UN Number | UN1444 |
| Proper shipping name | AMMONIUM PERSULPHATE |
| Hazard Class | 5.1 |
| Packing group | III |
TDG
| UN Number | UN1444 |
| Proper shipping name | AMMONIUM PERSULPHATE |
| Hazard Class | 5.1 |
| Packing group | III |
IATA
| UN Number | UN1444 |
| Proper shipping name | AMMONIUM PERSULPHATE |
| Hazard Class | 5.1 |
| Packing group | III |
IMDG/IMO
| UN Number | UN1444 |
| Proper shipping name | AMMONIUM PERSULPHATE |
| Hazard Class | 5.1 |
| Packing group | III |
| Fedral and State Regulation | Connecticut hazardous material survey.: Ammonium persulfate New Jersey: Ammonium persulfate TSCA 8(b) inventory: Ammonium persulfate |
| Other Regulation | OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR 1910.1200). EINECS: This product is on the European Inventory of Existing Commercial Chemical Substances. |
| WHMIS (Canada) | CLASS C: Oxidizing material. |
| DSCL (EEC) | R8- Contact with combustible material may cause fire. R20/22- Harmful by inhalation and if swallowed. R36/37/38- Irritating to eyes, respiratory system and skin. R42/43- May cause sensitization by inhalation and skin contact. S22- Do not breathe dust. S24- Avoid contact with skin. S26- In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S37- Wear suitable gloves. |
| HMIS | |
| Health Hazard | : 2 |
| Fire Hazard | : 1 |
| Reactivity | : 3 |
| Personal Protection | : E |
| Fire : | |
| Health Hazard | : 2 |
| Fire Hazard | : 1 |
| Reactivity | : 3 |
| Specific Hazard | : |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and weassume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if RX Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |
Availability
Sodium Dodecyl Sulfate Powder manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Sodium Dodecyl Sulfate Powder at a competitive price from us. We have ready stock of Sodium Dodecyl Sulfate Powder in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
