Sodium Hexametaphosphate - 10% Solution
- Part number
- RXSOL-60-6210-100
- Category
- Lab Chemical
- Brand
- RXSOL
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | RXSOL-60-6210-100 |
| Product Type | Sodium Hexametaphosphate - 10% Solution |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Kolkata, Vizag, Fujairah, Muscat Barka, Canada
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
| SARA 313 Component | CAS Number | Percent Comp. |
Dimension |
Exposure Limits |
| Sodium Phosphate Hexameta Anhydrous | CAS# 10124- 56-8 | 10% | W/V |
TXDS: orl-mus LD•: 7250 mg/Kg |
| Water, Deionized ASTM Type II | CAS# 7732-18-5 | 90% | V/V |
None Established |
May be harmful if swallowed. May cause irritation. Avoid breathing vapors, or dusts. Use with adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash thoroughly after handling.
Caution! May Cause Irritation To Skin, Eyes, And Respiratory Tract. May Be Harmful If Swallowed Or Inhaled.
May Cause Irritation to the Respiratory Tract. Symptoms may Include Coughing and Shortness
of Breath.
Ingestion:Phosphates are Slowly and Incompletely Absorbed when Ingested, and Seldom Result in Systemic Effects. Such Effects, However, Have Occurred. Symptoms may Include Vomiting, Lethargy, Diarrhea, Blood Chemistry Effects, Heart Disturbances and Central Nervous System Effects. The Toxicity of Phosphates is Because of their Ability to Sequester Calcium. Systemic Acidosis may Result as this Material is Believed to Hydrolyze into Phosphoric Acid when Ingested.
Skin:May Cause Irritation with Redness and Pain.
Eye Contact::May Cause Irritation, Redness and Pain.
Chronic Exposure:May Sequester Calcium and Cause Calcium Phosphate Deposits in the Kidneys. Chronic
Aggravated by Exposure::Ingestion or Inhalation may Induce Systemic Phosphorous Poisoning. Liver Damage, Kidney Damage, Jaw/Tooth Abnormalities, Blood Disorders and Cardiovascular Effects can Result. Persons with Pre-Existing Skin Disorders or Eye Problems, Jaw/Tooth Abnormalities, or Impaired Liver, Kidney or Respiratory Function may be More Susceptible to the Effects of the substance.
May be harmful if swallowed. May cause irritation. Avoid breathing vapors, or dusts. Use with adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash thoroughly after handling.
|
SKIN: |
Wash exposed area with soap and water. If irritation persists, seek medical attention. |
| EYES: | Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally.Seek Medical Aid. |
| INHALATION: | Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen |
| INGESTION: | If swallowed, induce vomiting immediately after giving two glasses of water. Never give anything by mouth to an unconscious person. |
|
Fire Extinguisher Type: |
Any means suitable for extinguishing |
| Fire / Explosion Hazards: | None Known |
| Fire Fighting Procedure: |
Use any means suitable for extinguishing surrounding fire. Use water spray cool fire exposed containers.. |
Absorb spill with inert material, then place in a chemical waste container. Dispose of in a manner consistent with federal, local law.
Ventilate Area of Leak or Spill. Keep Unnecessary and Unprotected People Away from Area of Spill. Wear Appropriate Personal Protective Equipment as Specified in Section 8. Contain and Recover Liquid when Possible. Collect Liquid in Appropriate Container and Absorb with Dry Sand, Vermiculite, Earth or Other Inert Substance and Package in a Suitable Container for Disposal. Do not Flush to Sewer!
Keep in tightly closed container, stored in a cool dry ventilated area. Protect against physical damage and freezing. Containers of this material may be hazardous when empty since they retain product
|
Respiratory Protection |
None required |
| Ventilation | Local |
| OTHER | Mechanical |
| Protective Gloves | Gloves to prevent skin exposure as rubber or vinyl |
| EYE PROTECTION | Residues. Safety Glasses |
| Other Protective Equipment | None required |
| BOILING POINT | Information not available |
| VAPOR PRESSURE | Information not available |
| MELTING POINT | Information not available |
| VAPOR DENSITY | Not available |
| EVAPORATION RATE | Information not available |
| Appearance /Odors | Clear water white / None |
| Flash Point | None |
| Specific Gravity | ~1.01 |
| Percent Volatile by | ~90% |
| Evaporation Standard | |
| Auto Ignition Temp |
Not applicable |
| Lower Flamm. Limit in Air |
Not applicable |
| Upper Flamm. Limit in Air |
Not applicable |
| Solubility in Water | Soluble |
|
STABILITY |
Stable |
|
CONDITIONS TO AVOID |
None Known |
|
MATERIALS TO AVOID |
None Known |
|
HAZARDOUS DECOMPOSITION PRODUCTS |
sodium and phosphorous oxides if |
|
HAZARDOUS POLYMERIZATION |
will not occur |
| Conditions to Avoid | None known |
Carcinogenic References: IARC Category – None, NTP Carcinogen - Known: No
No Information Found.
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from feeral disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements.
DOT Classification: Not Regulated
DOT Regulations may change from time to time. Please consult the most recent D.O.T. regulations.
Chemical Inventory Status –
Part 1:Ingrdient
Polyphosphoric Acids, Sodium Salts (68915-31-1)
TSCA Yes
EC Yes
Japan YES
Australia Yes
Chemical Inventory Status –
Part 2:Ingredient
Polyphosphoric Acids, Sodium Salts (68915-31-1)
Korea Yes
DSL Yes
NDSL No
Phil. Yes
Federal, State & International Regulations –
Part 1: Ingredient.
Polyphosphoric Acids, Sodium Salts (68915-31-1)
RQ No
TPQ No
List NO
Chemical Catg: No
Federal, State &
International Regulations –
Part 2:Ingredient
Polyphosphoric Acids, Sodium Salts (68915-31-1)
CERCLA NO
261.33 No
8(d) No
Chemical Weapons Convention: No
TSCA 12 (b):No
CDTA:No MIXTURE/SOLID
SARA 311/312: Acute: yes
Chronic: yes
Fire: No
Pressure: No
Reactivity: No
Australian Hazchem Code: None allocated
Poison Schedule: None allocated
Overexposure symptoms. Caution! May cause irritation to skin, eyes, and respiratory tract. May be harmful if swallowed or inhaled. Possible irritation of eyes/stomach. Chronic: phosphates are slowly and incompletely absorbed when ingested and seldom result in systemic effects. Such effects however have occurred. Symptoms may include vomiting, lethargy, diarrhea, blood chemistry effects, heart disturbances and central nervous system effects. The toxicity of phosphates is because of their ability to sequester calcium. Systemic acidosis may result as this material is believed to hydrolyze into phosphoric acid when ingested. Chronic exposure: May sequester calcium and cause calcium phosphate deposits inthe kidneys. May cause liver damage, kidney damage, jaw/toothe abnormalities, blood disorders and cardiovascular effects can
Flammability
Health Reactivity
|
Revisions |
NFPA |
| 7/30/2010 | 0.1 updated msds to 16 section from 10 section msds. STN |
| 0 | |
| 6/20/2012 | 0.2 Revised to correct ingredient percentage |
The information herein is believed to be accurate and is offered in good faith for the user's consideration and investigation. No warranty either expressed or implied is made for the completeness or accuracy of the information whether originating from the above mentioned company or not. Users of this material should satisfy themselves by independent investigation of current scientific and medical knowledge that the material
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.