RXSOL CHEMO PHARMA International Navi Mumbai, India

Products

7,061 products across 71 categories for marine, industrial, water treatment and laboratory use.

Browse all products Product catalogue

Lab Chemical

Sodium Hydroxide 6 Normal Solution

Volumetric Standardised Solutions of SODIUM HYDROXIDE NaOH SOLUTION N/10
Part number
RXSOL-60-6280-500
Category
Lab Chemical
Brand
RXSOL
Sodium Hydroxide 6 Normal Solution

Safety and SDS

Read the safety data sheet before handling. Wear suitable gloves and eye protection.

View safety data sheet
Product Name Sodium Hydroxide 6 Normal Solution
Product Type RXSOL-60-6280-500

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA 

Stock Pont : Mumbai, Kandla, Kolkata, Chennai, Visakhapatnam, Fujairah

Phone +91 22 27815541 / 42
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email rxsolchemicals@gmail.com
SARA 313 Component  CAS Number Percent Comp. Dimension
 
Exposure
 Limits
 
Sodium Hydroxide CAS# 1310-73-2

 24%

W/V OSHA PEL 2mg/mƒ ACGIH 2mg/mƒ
Water, Deionized ASTM Type II CAS# 7732-18-5 76% V/V None Established

Causes severe irritation and burns. May be harmful if swallowed. Avoid breathing vapor or dust. Use with adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash thoroughly after handling. Keep container closed.

Emergency Overview:Harmful If Swallowed Or Inhaled. May Cause Burns To Any Area Of Contact. Reacts With Water, Acids And Other Materials.

Inhalation:Mists May Irritate Respiratory Tract.

Ingestion:Swallowing may Cause Burns of the Mouth, Throat and Stomach.

Skin:May Cause Irritation to Skin

Eye Contact:May Cause Irritation to Eyes, and with Greater Exposures, Severe Buns with Possibly Blindness

Chronic Exposure:Persons with Pre-Existing Skin Disorders may be Susceptible to these Solutions.

Aggravated by Exposure:Persons with Pre-existing Skin Disorders or Eye Problems or Impaired Respiratory Function May be More Susceptible to the Effects of the Substance

Causes severe irritation and burns. May be harmful if swallowed. Avoid breathing vaporor dust. Use with adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash thoroughly after handling. Keep container closed.

SKIN:

Remove contaminated clothing. Wash exposed area with soap and water. if irritation persists, seek medical attention
EYES: Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally.
INGESTION: Give several glasses of milk or water. Vomiting may occur spontaneously, but DO NOT INDUCE! Never give anything by mouth to an unconscious person.

Fire Extinguisher Type:

Any means suitable for extinguishing surrounding fire
Fire / Explosion Hazards: None
Fire Fighting Procedure: Use water spray to cool fire exposed containers

Ventilate area of spill or leak. Wear appropriate PPE.Residues from spills can be diluted with water, neutralized with dilute acid such as Hydrochloric Absorb with inert material, then place in a chemical waste

Ventilate area of Leak or Spill. Keep Unnecessary and Unprotected People away from the area of Spill. Wear Appropriate Personal Protective Equipment as Specified in Section 7. Contain and Recover Liquid when Possible. Use Non-Sparking Tools and Equipment. Collect Liquid in an Appropriate Container or Absorb with an Inert Material (e.g.,Vermiculite, Dry Sand, Earth). Do Not use Combustible Materials, such as Saw Dust. Do Not Flush to Sewer! US Regulations(CERCLA) Require Reporting Spills and Releases to Soil, Water and Air in Excess of Reportable Quantities.

Keep in a tightly closed container. Protect from physical damage. Store in a cool dry ventilated area away from sources of heat, moisture and incompatibilities. Wash thoroughly after handling.

Respiratory Protection

NIOSH/MSHA-approved respirator
Ventilation
 
 Local
 
OTHER Mechanical
 
Protective Gloves NIOSH Approved Gloves
EYE PROTECTION Goggles and Face Shield
Other Protective Equipment Wear appropriate clothing to prevent skin exposure
BOILING POINT ~230° F (110°C)
VAPOR PRESSURE  not available
MELTING POINT ~24° F
VAPOR DENSITY  not available
EVAPORATION RATE information not available
Appearance /Odors Clear odorless liquid
Flash Point

Not applicable

Specific Gravity ~1.22
Percent Volatile by ~76%
Evaporation Standard  
Auto Ignition Temp

Not applicable

Lower Flamm. Limit in Air Not applicable
 
Upper Flamm. Limit in Air  Not applicable
 
Solubility in Water Soluble

STABILITY

Stable

CONDITIONS TO AVOID

Avoid contact with incompatible materials

MATERIALS TO AVOID

Acids, flammable liquids, organic halogens, metals, nitrocompounds

HAZARDOUS DECOMPOSITION PRODUCTS

Contact with water produces corrosive fumes.

HAZARDOUS POLYMERIZATION

will not occur
 
Conditions to Avoid  None known

Carcinogenic References: NTP Carcinogen - Known: No, IARC Category- None

Environmental Fate: No Information Found..

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste facility. Although not a listed RCRA hazardous waste, this material may exhibit one or more characteristics of a hazardous waste and require appropriate analysis to determine specific disposal requirements. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements.

DOT Classification: UN1824, Sodium Hydroxide Solution, 8,PG II

DOT Regulations may change from time to time. Please consult the most recent D.O.T. regulations

Chemical Inventory Status –
Part 1:Ingrdient
Sodium Hydroxide (1310-73-2))
TSCA Yes
EC Yes
Japan YES
Australia Yes

Chemical Inventory Status –
Part 2:Ingredient
Sodium Hydroxide (1310-73-2)
Korea Yes
DSL Yes
NDSL No
Phil. Yes

Federal, State & International Regulations –
Part 1: Ingredient.
Sodium Hydroxide (1310-73-2)
RQ No
TPQ No
List NO
Chemical Catg No

Federal, State &
International Regulations –
Part 2:Ingredient
Sodium Hydroxide (1310-73-2)
CERCLA 1000
261.33 No
8(d) No
Chemical Weapons Convention: No
TSCA 12 (b):No
CDTA:No PURE/LIQUID
SARA 311/312: Acute:YES
Chronic: No
Fire: No
Pressure: No
Reactivity: No

Australian Hazchem Code: 2R
Poison Schedule:S5
 

Danger! Poison! Corrosive! May be fatal if swallowed. Harmful if inhaled. Causes burns to any area of contact. Reacts with water,acids and other materials. Swallowing may result to burns to mouth, throat and stomach. Conditions aggravated/target organs: Corrosive! Persons with preexisting skin, eye or respiratory disorders may be more susceptible. Acute: Severe irritation or burns to skin, eyes, respiratory tract and digestive tract, pneumonitis, eye damage, edema, asphyxia. Chronic: Dermatitis, bronchial irritation      

                                                 Flammability
 

Health                                                                                                     Reactivity

Revisions

  NFPA
  0
7/30/2010 0.1 updated msds to 16 section from 10 section msds. STN

The information herein is believed to be accurate and is offered in good faith for the user's consideration and investigation. No warranty either expressed or implied is made for the completeness or accuracy of the information whether originating from the above mentioned company or not. Users of this material should satisfy themselves by independent investigation of current scientific and medical knowledge that the material

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Request the signed SDS as PDF

Availability

Sodium Hydroxide 6 Normal Solution manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Sodium Hydroxide 6 Normal Solution at a competitive price from us. We have ready stock of Sodium Hydroxide 6 Normal Solution in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Our stock points and branches