Sodium Silicate Water Glass
- Part number
- RXSOL-81-8107-010
- Category
- Agriculture
- Brand
- RXSOL
Overview
Silica gel production
Builder or anti-soil-redeposition agent for detergent
Peroxide stabilizer in bleaching for textile and pulp
Solubilizer in ink, flux binder for welding rods
Deflocculant for ceramic
Buffer
Fireproofing paper catalysts
Water treatment
Concrete hardner and acid-proof
Petroleum processing by emulsion breaking and corrosion prevention
Timber treatment.
Oil Field use
Technical specifications
TESTING PROCEDURE :::
ANLYSIS PROCEDEURE OF SODIUM SILICATE : Take 5gm of sodium dilute it to 250ml in SMF with dist. Water , take 50 ml of the diluted solution add 2-4 drops of methyl red indicator. Then titrate it against IN {approx.} HCL Light Pink is the end point. Take this reading as “A” ml. To this solution add 5 gm of sodium fluoride dissolve properly add 6-7 drops of methyl red indicator titrate against IN HCL appearance of slight pink colour is the end point . Take this reading as “B” ml
CALCULATION For Na2O
“A”ml x 3.1 x normality of HCl = C%
Wt. Of sample
For Sio2
“B”ml x 15.02 x normality of HCl
Wt. Of sample X 10
Ratio of sodium silicate
% of SiO2 i.e D%
% of Na2o C%
Viscosity- AS PER IS 3944 B4 CUP
DETERMINATION OF IRON (as per Fe)
- Botanic Potassium Thiocynate ;- dissolve 1.0gm of potassium thiocynate in10ml of water. Add sufficient n-butano to makeup to 100ml. Shake vigorously until the solution is clear.
- Dilute H2SO4 :- approx.10%
- Standard Iron solution : weight 0.702gm of Ferrus Ammonium sulfate. Dissolve in 10ml dilute H2SO4 then make up 1000ml with water. Transfer 10 ml of this solution in 100ml M.Flask and make up 100ml with water. 1ml of this solution is equivalent to 0.01mg of iron
PRCEDURE :
- Sample Reading: take about 5gm of the sample accurately weighted. Dissolve it in distilled water and make the solution exactly 100ml. Take 10 ml of this solution add 1ml concentrated Nitric acid. Boil the solution and cool. Then transfer it into a nessler cylinder and add 30mg of Ammonium Persulfate and 15 ml of Botanic Potassium Thiocynate solution. Shake for 30 sec and allow the liquid to separate.
-
Blank reading : take 10 ml distilled water. Add 1ml concentrated Nitric acid boil the solution and cool. Then transfer it into a nesseler cylinder and add 30 mg of Ammonium Persulfate and 15 ml of Botanic Potassium Thiocynate solution . Shake for 30 sec. And allow the liquid to separate. Then add Standard Iron Solution until the colour of Butanol Layers in Both Cylinder (Sample & Blank)
CALCULATION :
Iron as Fe (%w) = 0.001 V
W
Where,
V= Volume in ml of Standard Iron Solution to add in Blank Reading
W= Weight in gm of sample
Applications
Range of Products:
We manufacture large range of Sodium Silicate both in Neutral and Alkaline grade of the typical qualities.
We also manufacture Sodium Silicate as per the customer's requirements and specification.
| Sodium Silicates | Concentration | Mole Ratio | Baume |
| Alkaline Sil | 40 - 54 % | 2.1 to 2.6 | 45 - 57 |
| Neutral Sil | 27 - 39 % | 3.0 to 3.5 |
30 - 41.5 |
Adhesives and Sealants Manufacture
Sodium silicate is selected to produce adhesives and sealants due to its adhesive nature. It gets more appreciation because of its best heat resistance and ability to stick to a wide variety of substrates.
Benefits of Sodium Silicate Adhesives in What is Probably a Sticky Situation
There are innumerable advantages of the use of sodium-silicate-based adhesives. The deep penetration properties and quick setting times give increased bond strength on porous surfaces such as fabric, paper, and wood.
Moreover, sodium-silicate-based adhesives possess good fire retardant and heat resistance properties, which makes them useful in factories or fireproofing applications.
The fact that there are less volatile organic compounds emitted than with solvent-based adhesives enhances their environment-friendliness features further.
Water Treatment Applications
The salt silicate is known to prevent scaling and rusting in the cooling or boiler systems in the water treatment process. Removal of heavy metals from water makes it integral to the wastewater treatment process.
The Other Applications of Salt Silicate in Agriculture
Then there may be a question about the uses of salt silicate. Let us tell you, this is a substance that does all the functions in agriculture. It matters that much: it helps to stabilize the soil; it helps to keep pests at bay; it matters the most, and it helps to keep the plants happy.
Stabilizing Soil and Control of Dust
Imagine a world without dust and soil erosion from construction and building sites or farm roads. Well, scatter the vision bright and true, because salt silicate makes it possible. Simply put, it stabilizes soil, creates a concrete surface that easily resists dust formation, promotes plant growth, and provides a firm underground for farming liaises.
Production of Plant Food
Sodium silicate is a true game-changer in the production of fertilizer. It increases fertilizers’ efficiency and dependability by improving their security and slow-release residential qualities. It guarantees that our plants get the nourishment they require to thrive by preventing nutrient leaking and improving nutrition accessibility to plants.
Parasite Control and Crop Security
Now, this is where sodium silicate really shines. When applied to plants, it creates a barrier that keeps insects away and stops microbial and fungal infestations.
In addition to reducing the need for chemical pesticides, this all-natural defense response encourages stronger crop development, guaranteeing a bountiful harvest for all.
Application of Sodium Silicate in Building and Structure Products
Just to clarify the discussion on salts of silicate, also known as water glass, in the building and structural products market. This wondrous substance acts as a basic ingredient in concrete.
This gives increased toughness, durability, and chemical deterioration resistance to these concrete products.
Dosage and directions
|
Sodium Silicate is a compound mixture of sodium oxide i.e. Na2o with silica sand i.e. Sio2 with water. Sodium silicate is also called water glass. There are two process to manufacture liquid Sodium Silicate. To manufacture a lower ratio of Sodium Silicate by Hydrothermal process. Mixture at Na2Co3 (Soda Ash) with Sio2(Silica sand) in furnace fuses of more then 1100oC gives sodium silicate glass in lumps form which is easily dissolved in hot water.We manufacture large range of sodium silicates, as per the customer's specific requirements. |
|
Sodium Silicate is a compound mixture of sodium oxide i.e. Na2o with silica sand i.e. Sio2 with water. Sodium silicate is also called water glass. There are two process to manufacture liquid Sodium Silicate. To manufacture a lower ratio of Sodium Silicate by Hydrothermal process. Mixture at Na2Co3 (Soda Ash) with Sio2(Silica sand) in furnace fuses of more then 1100oC gives sodium silicate glass in lumps form which is easily dissolved in hot water.We manufacture large range of sodium silicates, as per the customer's specific requirements. |
Characteristics and notes
PRODUCT IDENTIFICATION
CAS NO. ....... .1344-09-8
EINECS NO... .215-687-4
FORMULA ...... 2Na2O.SiO2
MOL WT. ........184.04
H.S.CODE....... 2839.19
SODIUM METASILICATE (5H2O)
SILICA GEL
It is available in white and blue colour Indicating & Non-Indicating type with Sio2 content 97-98 %. It observes the moisture. It is used in electrical goods, telephone system, All electronic items, In Pharmaceuticals, In chemical Process. Available in sachet of 1 to 25 gms and also in bulk packages of 25 kgs or 50 kgs in Fibre drum.
Our proximity to the International port helps us to give fast reliable and efficient delivery to our overseas customers. We have exported to various countries like Netherlands , Iraq , Malaysia ,Saudi Arabia and UAE to name a few.
Sodium silicate, also called water glass or Soluble Glass, is any one of several compounds containing sodium oxide, Na2O, and silica, Si2O, or a mixture of sodium silicates varying ratios of SiO2 to Na2O, solids contents, and viscosity. Traditionally, sodium silicates are classified according to the acid from which they are derived as Orthosilicate Na4SiO4; Metasilicate Na2SiO3; Disilicate Na2Si2O5; Tetrasilicate Na2Si4O9. They are also classified by an X-ray diffraction method according to their crystalline structure. All these compounds are colorless, transparent, glasslike substance available commercially as a powder or as a transparent, viscous solution in water. They can be dissolved in water to form a syrupy liquid. Some forms are slightly soluble, and some are almost insoluble; they are best dissolved by heating with water under pressure. The solutions are strongly alkaline. They are produced chiefly by fusing sand and sodium carbonate in various proportions. The use of sodium silicates is as a raw material for making silica gel. Also used in detergent; as a cement for glass, pottery, and stoneware; for fireproofing paper, wood, cement, and other substances; for fixing pigments in paintings and cloth printing.
Our Specialty:
We supply both Neutral & Alkaline sodium silicate absolute transparent quality i.e. water white.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
|
Product Nam |
Sodium Silicate Water Glass |
|
Product Type |
RXSOL-81-8107-010 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Points: Mumbai, Kandla, Kolkata, Visakhapatnam, Chennai, Fujairah UAE, Muscat Oman, Kenya, Canada
| Phone | +91 22 65113333/ 5555 / 9999 / 27611360 / 27815540 |
| Fax | +91 22 2781 1318 :::AOH :0091 9322594669 |
| rxsolchemicals@gmail.com |
|
Ingredient |
CAS No |
Percent Hazardous |
|
Sodium Silicate |
1344-09-8 |
35 - 40% Yes |
|
Water |
7732-18-5 |
60 - 65% No |
Emergency Overview
WARNING! HARMFUL IF SWALLOWED OR INHALED. CAUSES SEVERE IRRITATION TO EYES, SKIN AND RESPIRATORY TRACT.
SAF-T-DATA(tm) Ratings (Provided here for your convenience)
| Health Rating | : 2 - Moderate |
| Flammability Rating | : 1 - Slight |
| Reactivity Rating | : 1 - Slight |
| Contact Rating | : 3 - Severe |
| Lab Protective Equip | : GOGGLES & SHIELD;LAB COAT&APRON;VENT HOOD;PROPER GLOVES |
| Storage Color Code | : Green (General Storage) |
Potential Health Effects
Diluted solutions of sodium silicate are strong alkaline irritants. The solid sodium silicate is corrosive. Exposure to alkaline corrosives may result in severe burns depending on the concentration and duration of exposure. Sodium silicate is a type of amorphous silica and does not cause pulmonary silicosis.
Inhalation:
A strong alkaline irritant. Inhalation can cause severe irritation of mucous membranes and upper respiratory tract. Symptoms may include burning sensation, coughing, wheezing, laryngitis, shortness of breath, headache, nausea and vomiting. High concentrations may cause lung damage.
Ingestion:
A strong alkaline irritant. Causes irritation to the gastrointestinal tract. Symptoms may include nausea, vomiting and diarrhea. Solid sodium silicate: Alkaline corrosive ingestion may produce burns to the lips, tongue, oral mucosa, upper airway, esophagus and occasionally stomach.
Skin Contact:
A strong alkaline irritant. Causes severe irritation. Symptoms include redness, itching and pain. Dries to form a glass film which can cut skin. Solid sodium silicate: Dermal contact with alkaline corrosives may produce pain, redness, severe irritation or full thickness burns.
Eye Contact:
A strong alkaline irritant. Alkaline eye exposures produce severe irritation with effects similar to those of dilute caustics. Inflammation or burns with possible damage to the eye tissues can occur together with tearing and considerable pain.
Chronic Exposure:
No information found.
Aggravation of Pre-existing Conditions:
Persons with pre-existing skin disorders or impaired respiratory function may be more susceptible to the effects of the substance
Inhalation:
Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion:
If swallowed, DO NOT INDUCE VOMITING. Give large quantities of water. Never give anything by mouth to an unconscious person. Get medical attention immediately.
Skin Contact:
Immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact:
Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
Fire:
Not considered to be a fire hazard.
Explosion:
Not considered to be an explosion hazard.
Fire Extinguishing Media:
Use any means suitable for extinguishing surrounding fire.
Special Information:
In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full facepiece operated in the pressure demand or other positive pressure mode.
Caution! Floor and other surfaces may be slippery. Ventilate area of leak or spill. Wear appropriate personal protective equipment as specified in Section 8. Contain and recover liquid when possible. Collect liquid in an appropriate container or absorb with an inert material (e. g., vermiculite, dry sand, earth), and place in a chemical waste container. Do not use combustible materials, such as saw dust. Do not flush to sewer!
Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Isolate from incompatible substances. Containers of this material may be hazardous when empty since they retain product residues (vapors, liquid); observe all warnings and precautions listed for the product.
Airborne Exposure Limits:
For Nitric Acid:
OSHA Permissible Exposure Limit (PEL): (80 mg/m3) / (%SiO2) (TWA).
Ventilation System:
A system of local and/or general exhaust is recommended to keep employee exposures below the Airborne Exposure Limits. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details.
Personal Respirators (NIOSH Approved):
If the exposure limit is exceeded, a half-face dust/mist respirator may be worn for up to ten times the exposure limit or the maximum use concentration specified by the appropriate regulatory agency or respirator supplier, whichever is lowest. A full-face piece dust/mist respirator may be worn up to 50 times the exposure limit, or the maximum use concentration specified by the appropriate regulatory agency, or respirator supplier, whichever is lowest. For emergencies or instances where the exposure levels are not known, use a full-facepiece positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection:
Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection:
Use chemical safety goggles and/or a full face shield where splashing is possible. Maintain eye wash fountain and quick-drench facilities in work area.
|
Appearance |
Clear to cloudy,viscous liquid. |
|
Odor |
Odorless. |
|
Solubility |
Complete (100%) |
|
Specific Gravity |
1.3 - 1.5 |
|
pH |
11 - 12.5 |
|
% Volatiles by volume @ 21(70F) |
ca. 70 |
|
Boiling Point |
102C (216F) |
|
Melting Point |
No information found. |
|
Vapor Density (Air=1) |
Not applicable. |
|
Vapor Pressure (mm Hg) |
18 @ 20C (68F) |
|
Evaporation Rate (BuAc=1) |
No information found. |
Stability:
Stable under ordinary conditions of use and storage.
Hazardous Decomposition Products:
No information found.
Hazardous Polymerization:
Will not occur.
Incompatibilities:
Fluorine, mineral acids, organic acids, organic materials. May produce hydrogen gas on prolonged contact with metals. Gels when mixed with acids. Solution is a strong base; reacts with acids, organic anhydrides, alkylene oxides, epichlorohydrin, aldehydes, alcohols, glycols, phenols, cresols, caprolactam solution. Attacks chemically active metals.
Conditions to Avoid:
Incompatibles.
Sodium silicate:
Oral rat LD50: 1960 mg/kg;
Skin rabbit LD50: > 4640 mg/kg;
Standard Draize Test: skin rabbit 500 mg/24H severe; eye rabbit 10 mg/24H severe.
| Cancer Lists | ||||
| NTP Carcinogen | ||||
| Ingredient | Known | Anticipated | IARC Category | |
| Sodium Silicate (1344-09-8) | No | No | None | |
| Water (7732-18-5) | No | No | None | |
Environmental Fate:
No information found.
Environmental Toxicity:
Sodium silicate:
96 Hr LC50 Lepomis macrochirus: 301-478 mg/L;
96 Hr LC50 Brachydanio rerio: 3185 mg/L [semi-static];
96 Hr EC50 Daphnia magna: 216 mg/L.
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements.
Not regulated.
Chemical Inventory Status - Part 1
| Ingredient | TSCA | EC | Japan | Australia |
| Sodium Silicate (1344-09-8) | Yes | Yes | Yes | Yes |
| Water (7732-18-5) | Yes | Yes | Yes | Yes |
Chemical Inventory Status - Part 2
| Ingredient | Korea | DSL | NDSL | Phil. |
| Sodium Silicate (1344-09-8) | Yes | Yes | No | Yes |
| Water (7732-18-5) | Yes | Yes | No | Yes |
Federal, State & International Regulations - Part 1
SARA 302-SARA 313
| Ingredient | RQ | TPQ | TPQ | Chemical Catg. |
| Sodium Silicate (1344-09-8) | No | No | No | No |
| Water (7732-18-5) | No | No | No | No |
Federal, State & International Regulations - Part 2
| Ingredient | CERCLA | -RCRA- 261.33 | TSCA 8(d) |
| Sodium Silicate (1344-09-8) | No | No | No |
| Water (7732-18-5) | No | No | No |
Chemical Weapons Convention: No TSCA 12(b): No CDTA: No
SARA 311/312: Acute: Yes Chronic: No Fire: No Pressure: No
Reactivity: No (Mixture / Liquid)
Australian Hazchem Code: None allocated.
Poison Schedule: None allocated.
WHMIS:
This MSDS has been prepared according to the hazard criteria of the Controlled Products Regulations (CPR) and the MSDS contains all of the information required by the CPR.
Text of R and S phrase codes used in this safety data sheet:- R34: Causes burns; R36: Irritating to eyes; R37:Irritating to respiratory system; R41: Risk of serious damage to eyes. The information provided about the product on this Safety Data Sheet has been compiled from knowledge of the individual constituents The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product in terms of safety requirements and does not signify any warranty with regard to the product's properties The data given here only applies when product used for proper application(s). The product is not sold as suitable for other applications usage in such may cause risks not mentioned in this sheet. Do not use for other application(s) without seeking advice from manufacturer.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
Sodium Silicate Water Glass manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Sodium Silicate Water Glass at a competitive price from us. We have ready stock of Sodium Silicate Water Glass in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
