Overview
Sodium sulfate anhydrous manufacturer and supplier in India, Middle East. Sodium Sulfate Anhydrous is the anhydrous, sodium salt form of sulfuric acid. Sodium sulfate anhydrous is an electrolyte replenisher and is used in isosmotic solutions so that administration does not disturb normal electrolyte balance and does not lead to absorption or excretion of water and ions.
Technical specifications
| Appearance (Form) | Powder |
| Purity | 99% |
| Molecular Formula | Na₂O₄S |
| Formula Weight | 142.04 g/mol |
| Chloride content | 0.2% Max |
| Melting point |
884 °C (1,623 °F; 1,157 K)(anhydrous)
32.38 °C (decahydrate)
|
| Boiling point | 1,429 °C (2,604 °F; 1,702 K)(anhydrous) |
| PH | 6 - 7.5 |
Applications
In the laboratory, anhydrous sodium sulfate is widely used as an inert drying agent, for removing traces of water from organic solutions.
Simply mix Sodium sulfate into solvent and stirr properly, all moisture will absorbed by sodium sulfate. Principal behind that is Sodium Sulfate Crystals consist of [Na(OH2)6]+ ions with octahedral molecular geometry. These octahedral share edges such that eight of the 10 water molecules are bound to sodium and two others are interstitial, being hydrogen bonded to sulfate. These cations are linked to the sulfate anions via hydrogen bonds.
Dosage and directions
Sodium sulfate is an important compound of sodium. When anhydrous, it is a white crystalline solid of formula Na2SO4. The deca hydrate, Na2SO4•10H2O, is known as Glauber's salt. Sodium sulfate is mainly used for the manufacture of detergents and in the Kraft process of paper pulping, although it has many other uses
Characteristics and notes
Sodium sulfate anhydrous is used primarily for drying non-aqueous solvents by removing traces of water. It is used as a fining agent for molten glass, levelling agent in textile processing, and filler in detergents. It is also used in Kraft process for paper pulping, defrosting windows, manufacture of starch, glass, and soap.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | Sodium Sulfate, Anhydrous |
| Product Type | RXSOL-60-6228-500 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Kolkata, Chennai, Vizag, Fujairah, Barka Muscat
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
| SARA 313 Component | CAS Number | Percent Comp. |
Dimension |
Exposure Limits |
| Sodium Sulfate Anhydrous 10 - 60 Mesh | CAS# 7757-82-6 |
100% |
W/W | TXDS: orl-musLD• 5989mg/Kg |
Generally not hazardous in normal handling, however good laboratory practices should always be used. Avoid long term exposure to skin or by inhalation.
Inhalation:Not expected to be a health hazard.
Ingestion:Mildly toxic by ingestion. Slowly absorbed from the alimentary tract. Because of osmotic activity,
it will draw water into the lumen of the bowel and may cause purging, fluid loss, blood in stools,fall of blood pressure, and high sodium levels in the blood.
Skin:No adverse effects expected.
Eye Contact:No adverse effects expected but dust may cause mechanical irritation.
Chronic Exposure:No information found.
Aggravated by Exposure:No information found
Generally not hazardous in normal handling, however good laboratory practices should always be used. Avoid long term exposure to skin or by inhalation.
|
SKIN: |
Wash exposed area with soap and water. If irritation persists, seek medical attention. |
| EYES: | Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally.Seek Medical Aid. |
| INHALATION: | Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen |
| INGESTION: | Give several glasses of water. Vomiting may occur, but it is not necessary to induce |
|
Fire Extinguisher Type: |
Any means suitable for extinguishing surrounding fire |
| Fire / Explosion Hazards: | None Known. |
| Fire Fighting Procedure: | Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and clothing. |
Sweep up and place in suitable (fiberboard) containers for reclamation or later disposal.
Ventilate area of leak or spill. Wear appropriate personal protective equipment as specified in Section 8. Spills: Sweep up and containerize for reclamation or disposal. Vacuuming or wet sweeping may be used to avoid dust dispersal.
Store in a tightly closed container. Keep from contact with oxidizing materials.
|
Respiratory Protection |
NIOSH/MSHA-approved respirator |
| Ventilation | Local |
| OTHER | Mechanical |
| Protective Gloves | Wear appropriate gloves to prevent skin exposure |
| EYE PROTECTION | Splash Goggles |
| Other Protective Equipment | Wear appropriate clothing to prevent skin exposure |
| BOILING POINT | 884°C (1623°F) |
| VAPOR PRESSURE | not available |
| MELTING POINT | information not available |
| VAPOR DENSITY | not available |
| EVAPORATION RATE | information not available |
| Appearance /Odors | Clear liquid,odorless |
| Flash Point | non-combustible |
| Specific Gravity | 2.68 |
| Percent Volatile by | 0 |
| Evaporation Standard | |
| Auto Ignition Temp |
Not applicable |
| Lower Flamm. Limit in Air | Not applicable |
| Upper Flamm. Limit in Air | Not applicable |
| Solubility in Water | Slight in water |
|
STABILITY |
Stable |
|
CONDITIONS TO AVOID |
Air, moisture, incompatibilities. odorless. |
|
MATERIALS TO AVOID |
Strong acids,aluminum,magnesium |
|
HAZARDOUS DECOMPOSITION PRODUCTS |
Oxides of sulfur. |
|
HAZARDOUS POLYMERIZATION |
will not occur |
| Conditions to Avoid | None known |
Carcinogenic References: NTP Carcinogen - Known: No, IARC Category- None
Environmental Fate:When released into the soil, this material is expected to leach intoground water. This material is not expected to significantly bioaccumulate.
Environmental Toxicity:This material is not expected to be toxic to aquatic life. The LC50/96-hour values for fish are over 100 mg/l. The EC50/48-hour values for daphnia are over 100 mg/l..
Whatever cannot be saved for recovery or recycling should be handled as hazardous waste and sent to a RCRA approved incinerator or disposed in a RCRA approved waste facility.Processing, use or contamination of this product may change the waste management options.State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements.
DOT Classification: Not Regulated
DOT Regulations may change from time to time. Please consult the most recent D.O.T. regulations.
Chemical Inventory Status –
Part 1:Ingrdient
Sodium Sulfate (7757-82-6)
TSCA Yes
EC Yes
Japan Yes
Australia Yes
Chemical Inventory Status –
Part 2:Ingredient
Sodium Sulfate (7757-82-6)
Korea Yes
DSL Yes
NDSL No
Phil. Yes
Federal, State & International Regulations –
Part 1: Ingredient.
Sodium Sulfate (7757-82-6)
RQ NO
TPQ NO
List NO
Chemical Catg No
Federal, State &
International Regulations –
Part 2:Ingredient
Sodium Sulfate (7757-82-6)
CERCLA NO
261.33 NO
8(d) No
Chemical Weapons Convention:No
TSCA 12 (b):No
CDTA:Yes (Pure/Liquid)
SARA 311/312: Acute: Yes
Chronic: Yes
Fire: Yes
Pressure: No
Reactivity: No
Australian Hazchem Code: 3x
Poison Schedule: S6
WARNING!! This material emits toxic fumes under fire conditions.Effects of over exposure:may cause irritation to the eyes,skin and upper respiratory tract. Acute:HARMFUL!! If inhaled,ingested or absorbed through the skin.Chronic:none listed by the manufacturer. Target organs: upper respiratory tract,eyes and skin. Conditions aggravated/target organs. Persons with pre-existing conditions may
Flammability
Health Reactivity
|
Revisions |
NFPA |
| 7/28/2010 | 0.1 updated msds to 16 section from 10 section msds. STN |
The information herein is believed to be accurate and is offered in good faith for the user's consideration and investigation. No warranty either expressed or implied is made for the completeness or accuracy of the information whether originating from the above mentioned company or not. Users of this material should satisfy themselves by independent investigation of current scientific and medical knowledge that the material
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
Sodium Sulfate, Anhydrous manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Sodium Sulfate, Anhydrous at a competitive price from us. We have ready stock of Sodium Sulfate, Anhydrous in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.